Knobs

P-ECB-071 Knob - Dunlop, Cosmod, Small Plastic MXR, Push-On
Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.
$2.50
P-ECB-130 Knob - Dunlop, MXR Knob for pedals, skirted
Large MXR knob with set screw for MXR pedals. Original Dunlop replacement part. Skirted knob with white line and dot indicator.
$3.70
P-ECB-229 Knob - Dunlop, Jimi Hendrix Fuzz Face JH-F1
Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.
$7.65
P-K155-1 Knob - Rogan, 155 Series, Witch Hat, Small Skirt, Indicator Line
High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay, a small skirt and an infilled indicator line. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
  • Height: 0.62 in.
  • Diameter: 0.84 in.
  • Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-2 0-10 Witch Hat P-K155-3 Large Witch Hat w/ Arrow
$2.75
P-K155-2 Knob - Rogan, 155 Series, Witch Hat, 0-10
High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay and a skirt numbered 0-10. This knob was used on many vintage Music Man amps and the 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
  • Height: 0.65 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-3 Large Witch Hat w/ Arrow
$3.15
P-K155-3 Knob - Rogan, 155 Series, Witch Hat, Large, Arrow
High-quality USA made knobs from Rogan Corp. These large phenolic knobs feature a brushed aluminum inlay and a skirt with an arrow indicator. With its 1.5” skirt diameter, this knob is much larger than the standard Fender and Music Man witch hat knobs. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
  • Height: 0.81 in.
  • Diameter: 1.50 in.
  • Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-2 0-10 Witch Hat
$3.35
P-K200X Knob - Orange brand, top hat, set screw
Original Orange™ amp knob with hex set screw. Fits 6 mm diameter shaft. Black top-hat style knob with with white dot indicator.
Starting at $7.15
P-K227 Knob - Davies, 1919, Daka-ware, Large, Skirted Pointer
High-quality USA made knobs from Davies Molding. The large skirted 1919 pointer knob is made of solid phenolic and features an infilled indicator line. The pointer has an overall length of 1.25” and the skirt’s diameter is 1.13”. This knob shares design elements of the Davies 19xx knobs allowing for a uniform look while using a variety of knob shapes and styles.
  • Height: 0.625 in
  • Length: 1.25 in.
  • Fits ¼" shaft with set screw
$2.95
P-K232X Knob - Davies, 1600 & 1610, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The small skirted 1610 knob is made of solid phenolic and features an indicator line on the 0.91” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
  • Height: 0.59 in.
  • Diameter: 0.91 in.
  • Fits ¼" shaft with set screw

The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
  • Height: 0.69 in.
  • Diameter: 1.5 in.
  • Fits ¼" shaft with set screw
$3.09
P-K234X Knob - Davies, 1910 and 1913, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
  • Height: 0.50 in.
  • Diameter: 0.75 in.
  • Fits ¼" shaft with set screw

Davies 1913 (Large)
  • Height: 0.625 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw
$2.75
P-K237 Knob - Davies, 1550, Daka-ware, Large, Skirted Pointer
High-quality USA made knobs from Davies Molding. The large skirted 1550 pointer knob is made of solid phenolic and features a white indicator line. The pointer has an overall length of 1.19” and the skirt’s diameter is 1.13”.
  • Height: 0.625 in
  • Length: 1.19 in.
  • Fits ¼" shaft with set screw
$1.75
P-K271PS-W Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.71 in.
  • Diameter: 0.57 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65
P-K272PS-W Knob - Rogan, PT Series, 2PS, Medium, Skirted, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
$1.65
P-K281PS-W Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in.
  • Diameter:0.57 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
$1.65
P-K281S-X Knob - Rogan, PT Series, 1S, Small, Skirted, D-Shaft
Colors Available:
High-quality USA made knobs from Rogan Corp. These small, skirted knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in.
  • Diameter: 0.57 in.
  • Fits 6mm D Shafts
  • No indicator

A variety of different sizes are available from the PT Series.
$1.65
P-K282PS-W Knob - Rogan, PT Series, 2PS, Medium, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.
$1.65
P-K282S-B Knob - Rogan, PT Series, 2S, Medium, Skirted, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits 6mm D Shafts
  • No indicator

A variety of different sizes are available from the PT Series.
$1.65
P-K283PS-W Knob - Rogan, PT Series, 3PS, Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in
  • Diameter: 0.73 in
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.75
P-K285PS-W Knob - Rogan, PT Series, 5PS, Wide, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.45 in.
  • Diameter: 0.84 in
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.85
P-K286PS-W Knob - Rogan, PT Series, 6PS, Extra Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These extra large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.63 in.
  • Diameter:1.25 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.95
P-K301-X Knob - Phenolic, Set Screw, Retro Valve, Skirted
Phenolic skirted knobs with a set screw. These unique knobs closely match the style of knobs used on vintage test equipment, radios, and studio equipment and are similar to the Davies 4104, 4106, and 4107. They feature an inlay indicator line in the skirt. Fits ¼” (6.35mm) pot shafts.
Starting at $9.55
P-K309 Knob - Plastic, Set Screw, Raytheon Style, Skirted, 1.812” Diameter
Plastic skirted knob with set screws and brass insert. This massive knob features a textured matte finish and closely matches the look of Raytheon knobs used on vintage test equipment, radios, and studio equipment. It features a painted inlay arrow indicator on the skirt. The large skirt has a diameter of 1.812 inches. Fits ¼” (6.35mm) pot shafts.
$4.99
P-K314 Knob - Fender®, Witch Hat, Black Skirted for Blackface Amps
Fender® skirted knobs with numbers (1-10) as used on Fender® amps. Pack of 6 for 1/4" solid shaft pots.
$19.95
package of 6
P-K314-1 Knob - Witch Hat, Black 1-10, Skirted, Set Screw, Thin Numbers
Black knob with white lettering, skirted, for blackface/silverface amps, with set screw, sold individually. Replacement for Fender: 099-0930-000
$3.65
Don't see what you're looking for? Send us your product suggestions!