Knobs

High quality chicken head knobs that resemble the style of knob found on the Zonk Machine II and Shatterbox fuzz pedals. The Zonk chicken head knob has a contoured center band with a textured finish. The outer dome has a shiny finish offering a visual contrast. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.75 in.
• Length: 1.065 in.
• Fits ¼" shaft with set screw

High quality phenolic knob with a classic chicken head design. This knob has an infilled indicator line. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.485 in.
• Length: 1.25 in.
• Fits ¼" shaft with set screw
• Brass Insert
• High Quality Phenolic

• Fits ¼" Solid Shafts (Set Screw)
• Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
• Brass Set Screw and Insert
• High Quality Plastic

Large black plastic control knob with set screw and brass insert. This distinctive pointer knob is similar to the selector knobs used on original MiniMoog and Moog modular synths. It features a triangular pointer, a radial brushed metal top, and a line indicator. The large skirt has a diameter of 1.125 inches. Fits ¼” (6.35mm) pot shafts.

Anodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

Solid wood knobs in the art deco style found on many D'Angelico guitars. The three inlaid lines serve as the indicator. Fits 6mm T24 (fine) knurled shafts.

• Height: 0.6 in.
• Diameter: 0.975 in.
• Fits T24 Knurled Shafts

Micro sized plastic control knobs for coarse knurled shafts. These super slim knobs are perfect for cramped panels, adding mods, and sub-controls on units with a variety of knobs. They have an infilled dot indicator. This style of knob can be found on many eurorack modules from Befaco and others. Fits T18 knurled shafts.

Small black plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top and a stylish vertical knurl. The style is a close match to the Boss middle knobs used on many pedals. Fits ¼” (6.35mm) pot shafts.

Small plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K411-X.

Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K655X.

High quality miniature chicken head knob for coarse knurled shafts. 0.90" long nose to tail. Mini Davies 2300 clone. Fits T18 knurled shafts. For a solid shaft version of this knob, see P-K900X.

Large black plastic control knob with set screw and brass insert. This skirted knob features a radial-brushed metal cap. The grip has large fluting with a white dot indicator on both the top of the grip and on the skirt of the knob. The style is similar to the Cosmo knobs found on many Moog synthesizers. Fits ¼” (6.35mm) pot shafts.

Medium sized plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. This style of knob can be found on some versions of the ProCo Rat. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K410-X.

Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.5”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K611-X. For a brushed finish version of this knob, see P-K655X.

The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.

Original Fender Knob spacers, for use with push-on knobs. Bushings slide over pot shafts and stabilizes the shaft.

High-quality USA made knobs from Rogan Corp. These small knobs feature a metal insert and a spun aluminum inlay with a black indicator line. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers.

• Height: 0.48 in.
• Diameter: 0.51 in.
• Fits ¼" shaft with set screws

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted

Original Fender Replacement Knobs For Strat. Push-On. Fits both coarse and fine knurled pots.

High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay and a skirt numbered 0-10. This knob was used on many vintage Music Man amps and the 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.

• Height: 0.65 in.
• Diameter: 1.13 in.
• Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-3 Large Witch Hat w/ Arrow

Gibson style top hat knob. 24 spline (for knurled split shaft pots).

High-quality USA made knobs from Davies Molding. The 1914 knob is the larger version of the classic 1900H found on countless synthesizers and pedals. This knob is made of solid phenolic and features an indicator line on the top. The knob pairs perfectly with the smaller diameter 1900 knobs such as the P-K801-BRASS-X as well as the skirted P-K234X knobs.

• Height: 0.50 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

¼” (6.35mm) solid shaft versions of Gotoh’s dome knobs. These premium knobs feature a diamond pattern knurl, a high quality finish and a matching set screw. For the 6mm solid shaft versions, see P-K250X

The P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.

High-quality USA made knobs from Rogan Corp. These medium knobs feature a metal insert, spun aluminum inlay, and a skirt with an infilled arrow indicator. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers..

• Height: 0.77 in.
• Diameter: 1.15 in.
• Fits ¼" shaft with set screws

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted