Knobs

P-K495X Knob - Chicken Head, Zonk Style, Set Screw
Colors Available:
New!:
High quality chicken head knobs that resemble the style of knob found on the Zonk Machine II and Shatterbox fuzz pedals. The Zonk chicken head knob has a contoured center band with a textured finish. The outer dome has a shiny finish offering a visual contrast. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.75 in.
  • Length: 1.065 in.
  • Fits ¼" shaft with set screw
$0.99
P-K499-33-X Knob - Painted Phenolic, Set Screw, Premium RCA Style, 33mm Skirt, Pointer
Colors Available:
Painted phenolic knobs with a set screw and brass insert. These unique knobs closely match the colorful RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. These classic knobs are painted to match the style of the original painted RCA knobs. The paint is a durable chip-resistant coating. The RCA style knobs feature an inlay indicator line. Fits ¼” (6.35mm) pot shafts.
  • Height: 0.792 in. (20.1 mm)
  • Diameter: 1.293 in. (33 mm)
  • Fits ¼" shaft with set screw
$6.95
P-K771S-X Knob - Rogan, RB-67 Series, Medium, Skirted
Colors Available:
High-quality USA made knobs from Rogan Corp. These medium knobs feature a metal insert, spun aluminum inlay, and a skirt with an infilled arrow indicator. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers..
  • Height: 0.77 in.
  • Diameter: 1.15 in.
  • Fits ¼" shaft with set screws

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted
$4.25
P-K271PS-W Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.71 in.
  • Diameter: 0.57 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65
P-K410-X Knob - Plastic, Set Screw, Knurled w/ Top Line, 0.542" Diameter
Colors Available:
Small plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K411-X.
$0.95
P-K225 Knob - Davies, 1700, Daka-ware, Pinched
High-quality USA made knobs from Davies Molding. The Davies 1700 is made of solid phenolic and has a classic style that fits nicely on any piece of equipment. The 1700 can be found on vintage radios and amplifiers, most notably the Filmosound projector amps that are popularly converted to guitar amplifiers.
  • Height: 0.59 in.
  • Diameter: 0.75 in.
  • Fits ¼" shaft with set screw
$3.55
P-K272PS-W Knob - Rogan, PT Series, 2PS, Medium, Skirted, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
$1.65
P-K611-X Knob - Aluminum, Matte Finish, Set Screw, Short Line, 0.75" Diameter
Colors Available:
Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K655X.
$2.15
P-K235X Knob - Davies, 1470, Daka-ware, Large, Pointer
Colors Available:
High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.
  • Height: 0.50 in.
  • Length: 1.13 in.
  • Fits ¼" shaft with set screw
Starting at $1.95
P-K281P-W Knob - Rogan, PT Series, 1P, Small, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.55 in.
  • Diameter: 0.45 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.
$1.65
P-K910-X Knob - Plastic, Push-On, Micro, Dot Indicator, 0.305" Diameter
Colors Available:
Micro sized plastic control knobs for coarse knurled shafts. These super slim knobs are perfect for cramped panels, adding mods, and sub-controls on units with a variety of knobs. They have an infilled dot indicator. This style of knob can be found on many eurorack modules from Befaco and others. Fits T18 knurled shafts.
$0.55
P-K802 Knob - Small Chicken Head, Black, Set Screw
Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.
$0.95
P-K387 Knob - Plastic, Set Screw, Skirted w/ Top Line, 0.87" Diameter
Black plastic control knob with set screw and brass insert. The grip has a thick vertical knurl with an indicator line on a raised top. This skirted knob is a close match to the knobs used on some late 1960s Fuzz Face® pedals as well as the Eric Johnson signature model. Fits ¼” (6.35mm) pot shafts.
  • Height: 0.77 in.
  • Diameter: 0.87 in.
  • Fits ¼" shaft with set screw
$0.99
On Backorder
P-K281PS-W Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in.
  • Diameter:0.57 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
$1.65
P-ECB-229 Knob - Dunlop, Jimi Hendrix Fuzz Face JH-F1
Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.
$2.40
P-K222X Knob - Davies, 8005 & 8010, Daka-ware, Vintage Pointer
High-quality USA made knobs from Davies Molding. The 8000 series knobs are made of solid phenolic and feature a classic teardrop design. The detailed design makes these knobs a striking addition to any piece of equipment. This unique design has been used on a variety of tools and instruments. Davies 8005 (Small)
  • Height: 0.78 in.
  • Length: 1.05 in.
  • Fits ¼" shaft with set screw

Davies 8010 (Large)
  • Height: 1 in.
  • Length: 1.25 in.
  • Fits ¼" shaft with set screw
$3.95
P-K282S-B Knob - Rogan, PT Series, 2S, Medium, Skirted, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits 6mm D Shafts
  • No indicator

A variety of different sizes are available from the PT Series.
$1.65
P-K385X Knob - Pointer, Large, Knurled, vintage index line
Colors Available:
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.
Starting at $0.99
P-K305 Knob - Phenolic, Set Screw, Gaunt Chicken Head
High quality chicken head knobs with vintage gaunt design. The gaunt chicken head has a thinner band that extends above the base allowing for easy manipulation of the knob. This knob has a thick infilled indicator line and is made of solid phenolic. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.67 in.
  • Length: 1.26 in.
  • Fits ¼" shaft with set screw
$1.20
P-K283PS-W Knob - Rogan, PT Series, 3PS, Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in
  • Diameter: 0.73 in
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.75
P-ECB-071 Knob - Dunlop, Cosmod, Small Plastic MXR, Push-On
Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.
$2.40
P-K412 Knob - Phenolic, Set Screw, Stealth Chicken Head
High quality chicken head style knob with a unique angular design. The stealth chicken head has a thin band that extends above the base allowing for easy manipulation of the knob. This solid phenolic knob has an infilled indicator line. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.7 in.
  • Length: 1.408 in.
  • Fits ¼" shaft with set screw
$1.99
P-K286PS-W Knob - Rogan, PT Series, 6PS, Extra Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These extra large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.63 in.
  • Diameter:1.25 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.95
On Backorder
P-K388X Knob - Cliff, K1C, Set Screw, 25.4 x 15.1mm
Cap Colors Available:
Skirted knob with dot indicator and a unique fluted grip. The Cliff K1C knob can be found on classic equipment such as the Zonk Machine fuzz pedal and most notably on the EMS Synthi synthesizers.
  • Height: 15.1mm
  • Diameter: 25.4mm
  • Fits ¼" shaft with set screw
Starting at $1.85
Don't see what you're looking for? Send us your product suggestions!