Knobs

P-K808-X Knob - Plastic, Knurled Shaft, 808 Style
Black textured plastic knobs with orange infilled indicator lines similar to the original knobs found on Roland TR-808 drum machines.These knobs feature a straight knurled grip. The large and medium sizes both have a skirt with a notched indicator. All sizes fit 6mm T18 knurled pot shafts.
Starting at $0.95
P-K480X Knob - Aluminum, Set Screw, Pinched with Line, 0.75" Diameter
Colors Available:
Solid aluminum control knob with set screw. This knob has a pinched grip and is similar in size and appearance to the Davies 1510 but with sharper angles for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.
  • Height: 0.575 in. (14.61 mm)
  • Diameter: 0.75 in. (19.05 mm)
  • Fits ¼" shaft with set screw
$1.89
P-K640-X Knob - Aluminum, Set Screw, Chicken Head
Colors Available:
New!:
Solid aluminum knob with a classic chicken head design. This knob has an infilled indicator line and counterbored base to hide potentiometer nuts. Fits 0.25” (6.35mm) shafts.
  • Height: 0.54 in. (13.72 mm)
  • Length: 1.25 in. (31.75 mm)
  • Fits ¼" shaft with set screw
$3.50
P-K850X Knob - Plastic, Set Screw, Fluted w/ Line, 0.745" Diameter
Colors Available:
Plastic control knob with set screw and brass insert. This knob features a distinctive fluting similar to the popular Philmore 3010 knob. This style is also similar to the small skirted MXR knobs. Fits ¼” (6.35mm) pot shafts.
$0.85
P-K421 Knob - Peavey, Black, Grey Stripe, Set Screw
Black with grey line, Set screw Peavey part: 70902033
$2.95
P-K611-X Knob - Aluminum, Matte Finish, Set Screw, Short Line, 0.75" Diameter
Colors Available:
Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K310X.
$2.25
P-K801-BRASS-X Knob - Scalloped Edge, Indicator Line, Set Screw, Brass Insert
Colors Available:
The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.
$0.95
P-K700X Knob - Chicken Head, Push-On, for knurled shaft
Colors Available:
High quality black plastic chickenhead knob. 1-1/4" in length. Push-on for split knurled shaft.
Starting at $1.20
P-K905 Knob - Chicken Head, Mini, High-quality, Push-On, T18
High quality miniature chicken head knob for coarse knurled shafts. 0.90" long nose to tail. Mini Davies 2300 clone. Fits T18 knurled shafts. For a solid shaft version of this knob, see P-K900X.
$0.65
P-K396-X Knob - Plastic, Set Screw, Neve / Marconi Style, 0.685” Diameter
Colors Available:
Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.685 inches. Fits ¼” (6.35mm) pot shafts. Note: Pair with R-VADAPT-125 to fit 0.125” potentiometer shafts. For a skirted version see P-K397-X. See P-K696 for the dual concentric knob lower.
$1.30
P-K801X Knob - Scalloped Edge, Indicator Line, Set Screw
Colors Available:
Set screw knob with indicator line and scalloped edge. Measures .50" in diameter and .6" in height. Davies 1900H clone
$0.79
P-K625-X Knob - Solid Brass, Vintage "Cupcake" Style, Set Screw
Colors Available:
Solid brass knobs with set screws. These circular knobs are a vintage radio style used on many amplifiers such as the Blonde / Brown era of Fender®. They feature a plated brass construction with an infilled indicator line and a vertical knurl for grip. They also feature a counterbore which allows the knobs to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.
  • Height: 0.469 in.
  • Diameter: 0.787 in.
  • Fits ¼" shaft with set screw
Starting at $5.65
P-K300X Knob - Chicken Head, set screw, brass inset
Colors Available:
  • Fits ¼" Solid Shafts (Set Screw)
  • Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
  • Brass Set Screw and Insert
  • High Quality Plastic
Starting at $1.30
P-K696 Knob - Metal, Set Screw, Neve / Marconi Style, Dual Concentric Lower, 0.99” Diameter
Metal knobs with set screws and brass insert. This knob is a close match for the lower section of the dual concentric knobs used on Marconi radios and Neve consoles. It features an inlay indicator line and a diamond pattern grip. The diameter is 0.99 inch. Pairs with P-K396-X . Fits ¼” (6.35mm) pot shafts.
Note: Knob is sold separately
$5.99
P-K900X Knob - Chicken Head, mini, high-quality, brass insert, Set Screw
Colors Available:
High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.
Starting at $0.99
P-K342-A Knob - Cliff, K5, Black, Short indicator, Set Screw, for Marshall
Black Cliff K5 knob with short indicator line. ¼" shaft with set screw. Replacement for Marshall. Measures 0.75" in height. See P-K342-NOI for a version with no indicator line.
$2.95
P-K310X Knob - Aluminum, Notched Tip Indicator, Set Screw, .75" Diameter
Colors Available:
¾" dia. Knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.
$2.99
P-K226 Knob - Davies, 2150, Daka-ware, Vintage Pointer
High-quality USA made knobs from Davies Molding. This vintage-style 2150 pointer knob is made of solid phenolic and features an infilled indicator line. The detailed design has a mixture of ridges, curves and lines giving it a distinctively vintage appearance. The 2150 can be found on vintage equipment such as the Echoplex tape delay and test equipment from RCA and National Radio Company.
  • Height: 0.56 in.
  • Length: 1.25 in.
  • Fits ¼" shaft with set screw
$3.45
P-K390X Knob - Push-On, Marshall Style, black base
Cap Colors Available:
.77" diameter x .62" tall. Fits both fine and coarse knurled pot shafts.
$1.45
P-K315 Knob - Fender®, Vintage "Cupcake", indicator line, set screw
Genuine Fender® Pure Vintage Radio Amplifier Knobs. From tone and volume knobs to pickup covers, bridge covers and more, Pure Vintage knobs and covers let you cosmetically customize your instrument or amplifier like never before. These genuine replacement parts are created with period-correct personality in mind to the same specifications as early Fender parts, allowing players to give any Fender amp, guitar or bass a shot of vintage-accurate looks and tone.
  • Set of six ribbed replacement amplifier control knobs with indicator lines
  • Introduced on Blonde and Brown-era amplifiers
  • Used on '63 Fender Tube Reverb, Vibroverb and Vibro-King® amplifiers
  • Fits most 1/4" solid shaft potentiometers on vintage and modern amplifiers and guitars
$19.95
package of 6
P-K235X Knob - Davies, 1470, Daka-ware, Large, Pointer
Colors Available:
High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.
  • Height: 0.50 in.
  • Length: 1.13 in.
  • Fits ¼" shaft with set screw
Starting at $2.55
P-ECB-67 Knob - Dunlop, MXR, small knurled, aluminum
Genuine Dunlop replacement small knurled knob for MXR pedals. Push -on style knob designed for use with coarse knurled shafts.
$3.67
P-K318 Knob - Fender®, Black Chicken-Head
Original Fender chicken head knob. Black, comes in a package of six. Set screw. For 1/4" solid shaft pots.
$19.95
package of 6
P-K305 Knob - Phenolic, Set Screw, Gaunt Chicken Head
High quality chicken head knobs with vintage gaunt design. The gaunt chicken head has a thinner band that extends above the base allowing for easy manipulation of the knob. This knob has a thick infilled indicator line and is made of solid phenolic. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.67 in.
  • Length: 1.26 in.
  • Fits ¼" shaft with set screw
$1.20
Don't see what you're looking for? Send us your product suggestions!