Knobs

Colors Available:
New!:
- Grip Diameter: 0.559 in.
- Skirt Diameter: 0.746 in.
- Length: 1.177 in.
- Height: 0.550 in.
Starting at $4.70

Phenolic skirted knobs with set screws and brass inserts. These skirted circular knobs are a close match for the classic knobs used on Fairchild compressors like the 660 / 670. They feature a V-shaped painted inlay indicator on the skirt as well as a dot indicator on the top of the grip. Fits ¼” (6.35mm) pot shafts. Pairs nicely with P-K347-30-X, P-K347-32-X, P-K347-52, P-K347-61 (see photo)
Starting at $5.30

Colors Available:
New!:
- Height: 0.792 in. (20.1 mm)
- Diameter: 1.293 in. (33 mm)
- Fits ¼" shaft with set screw
$6.95

Colors Available:
- Grip Diameter: 0.75 in.
- Skirt Diameter: 0.935 in.
- Length: 1.275 in.
- Height: 0.765 in
Item Size P-K347-30-X Small P-K347-32-X Medium P-K347-52 Large P-K347-61 Extra Large
Starting at $4.99

Colors Available:
- Height: 0.75 in.
- Length: 1.065 in.
- Fits ¼" shaft with set screw
$0.99

Black Marshall-style knobs with a silver cap. This is the taller 0.766” version of this knob. The silver cap has no indicator line matching those found on vintage fuzz pedals such as the Supa Fuzz, Tone Bender Professional MKII, Shatterbox, and MKIII and MKIV Tone Benders. Fits ¼" shaft pots using a slotted set screw.
- Height: 0.766 in.
- Top Diameter:0.594 in.
- Bottom Diameter:0.766 in.
- Fits ¼" shaft with set screw
$2.75

Colors Available:
New!:
- Fits ¼" Solid Shafts (Set Screw)
- Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
- Brass Set Screw and Insert
- High Quality Plastic
Starting at $1.30

Colors Available:
New!:
Starting at $0.95

Gibson style top hat knob. Fits fine knurled pot shafts.
$2.25

Colors Available:
- Height: 0.56 in.
- Diameter: 0.496 in.
- Fits ¼" shaft with set screw
$3.50

Black pointer with white line. Fits a 3/16" knurled shafts. Push on Peavey part: 70902145
$3.20

Plastic chicken head knobs for coarse knurled shafts. These tiny chicken head knobs are great for pedal builds or cramped face plates. They feature an inlay indicator line. The total length of the chicken head is 0.93 inches. Fits T18 knurled shafts.
$0.85

Ampeg classic knob. D shaft. Original Ampeg replacement part.
$3.95

Colors Available:
$0.95

Colors Available:
$2.25

Cap Colors Available:
$1.65

High-quality USA made knobs from Rogan Corp. These extra large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
A variety of different sizes are available from the PT Series.
- Height: 0.63 in.
- Diameter:1.25 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
A variety of different sizes are available from the PT Series.
$1.95

Colors Available:
Starting at $0.99

Dial plates with 0-100 indicator marks. These plates are a simple way to add panel graphics to controls. They are easy to install beneath the nut of a potentiometer like a washer. The silk screened graphics on the brushed metal plate gives projects a clean and professional appearance. 40mm Dial Plate
60mm Dial Plate
- 40 mm (1.575”) outer diameter
- 9.95 mm (0.392”) inner diameter
- Best for 25.4mm (1”) or smaller knobs
60mm Dial Plate
- 60mm (2.362”) outer diameter
- 9.95mm (0.392”) inner diameter
- Best for 40.6 mm (1.59”) or smaller knobs
$1.70

Colors Available:
- Height: 11mm
- Diameter: 15mm
- Fits 1/4" shaft with set screw
Starting at $0.75

High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay, a small skirt and an infilled indicator line. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-2 0-10 Witch Hat P-K155-3 Large Witch Hat w/ Arrow
- Height: 0.62 in.
- Diameter: 0.84 in.
- Fits ¼" shaft with set screw
A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-2 0-10 Witch Hat P-K155-3 Large Witch Hat w/ Arrow
$2.75

Package of 2
Original Fender knobs for the Telecaster. Chrome Dome.
Starting at $15.65

This nickel-plated brass adapter sleeve converts a 0.125 in. (3.17mm) shaft potentiometer to ¼" shaft (6.35mm), allowing for ¼" knobs to be used on a wider range of potentiometers. The cutout on the sleeve allows the set screw of the knob to secure directly to the shaft of the pot. Depending on the knob used, a longer set screw can be required.
$1.55

High quality miniature chicken head knob for coarse knurled shafts. 0.90" long nose to tail. Mini Davies 2300 clone. Fits T18 knurled shafts. For a solid shaft version of this knob, see P-K900X.
$0.65