Knobs

High quality miniature chicken head knob for coarse knurled shafts. 0.90" long nose to tail. Mini Davies 2300 clone. Fits T18 knurled shafts. For a solid shaft version of this knob, see P-K900X.

This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs feature a slotted set screw, and fit ¼" solid shaft potentiometers. These are a close match to the Davies 1400.

• Height: 0.43 in.
• Length: 0.825 in.
• Fits ¼" shaft with set screw

The P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.

The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.

Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.

Black plastic control knob with set screw and brass insert. The grip has a thick vertical knurl with an indicator line on a raised top. This skirted knob is a close match to the knobs used on some late 1960s Fuzz Face® pedals as well as the Eric Johnson signature model. Fits ¼” (6.35mm) pot shafts.

• Height: 0.77 in.
• Diameter: 0.87 in.
• Fits ¼" shaft with set screw

High quality chicken head knobs with vintage gaunt design. The gaunt chicken head has a thinner band that extends above the base allowing for easy manipulation of the knob. This knob has a thick infilled indicator line and is made of solid phenolic. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.67 in.
• Length: 1.26 in.
• Fits ¼" shaft with set screw

Large black plastic control knob with set screw and brass insert. This skirted knob features a radial-brushed metal cap. The grip has large fluting with a white dot indicator on both the top of the grip and on the skirt of the knob. The style is similar to the Cosmo knobs found on many Moog synthesizers. Fits ¼” (6.35mm) pot shafts.

High-quality USA made knobs from Davies Molding. The small 1400 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals and audio equipment such as the Pultec EQP-1A.

• Height: 0.38 in.
• Length: 0.84 in.
• Fits ¼" shaft with set screw

Skirted knob with dot indicator and a unique fluted grip. The Cliff K1C knob can be found on classic equipment such as the Zonk Machine fuzz pedal and most notably on the EMS Synthi synthesizers.

• Height: 15.1mm
• Diameter: 25.4mm
• Fits ¼" shaft with set screw

High quality chicken head style knob with a unique angular design. The stealth chicken head has a thin band that extends above the base allowing for easy manipulation of the knob. This solid phenolic knob has an infilled indicator line. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.7 in.
• Length: 1.408 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.

• Height: 0.50 in.
• Length: 1.13 in.
• Fits ¼" shaft with set screw

Generic white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.

High quality phenolic pointer knob with a vintage design. The retro pointer has a thick band that extends above the base allowing for easy manipulation of the knob making it a great option for rotary controls and switches. This solid phenolic knob has an infilled indicator line with a decorative diamond shaped top. Fits 0.25” (6.35mm) shafts with set screw and brass insert. This knob pairs perfectly with the smaller P-K356 knob.

• Height: 0.85 in.
• Length: 1.63 in.
• Fits ¼" shaft with set screw

Sold individually. Slightly thicker numbers than P-K314-1. Made in Taiwan.

Phenolic skirted knobs with a set screw and brass insert. These unique knobs closely match the RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. The RCA style knobs feature an inlay indicator line. Fits ¼” (6.35mm) pot shafts. 22mm Skirt:

• Height: 0.495in. (12.6 mm)
• Diameter: 0.875 in. (22 mm)
• Fits ¼" shaft with set screw

26mm Skirt:

• Height: 0.656 in. (16.7 mm)
• Diameter: 1.02 in. (26 mm)
• Fits ¼" shaft with set screw

33mm Skirt:

• Height: 0.792 in. (20.1 mm)
• Diameter: 1.293 in. (33 mm)
• Fits ¼" shaft with set screw

40mm Skirt:

• Height: 0.865 in. (22 mm)
• Diameter: 1.568 in. (40 mm)
• Fits ¼" shaft with set screw

Black with grey line, Set screw
Peavey part: 70902033

High-quality USA made knobs from Davies Molding. The small skirted 1610 knob is made of solid phenolic and features an indicator line on the 0.91” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.

• Height: 0.59 in.
• Diameter: 0.91 in.
• Fits ¼" shaft with set screw

The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.

• Height: 0.69 in.
• Diameter: 1.5 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay, a small skirt and an infilled indicator line. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.

• Height: 0.62 in.
• Diameter: 0.84 in.
• Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-2 0-10 Witch Hat P-K155-3 Large Witch Hat w/ Arrow

High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)

• Height: 0.50 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

Davies 1913 (Large)

• Height: 0.625 in.
• Diameter: 1.13 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. The large 1500 stove-style knob is made of solid phenolic and features an indicator line. The knob has a diameter of 1.125” with a .425” wide grip that runs the length of the entire knob. This classic Davies knob has been used on countless vintage electronics spanning many decades of use.

• Height: 0.56 in
• Diameter: 1.125 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. This vintage-style 2310 pointer knob is made of solid phenolic and features a unique triangular shape. This classic design has fine vertical ridges on the sides providing grip when in use. The 2310 can be found on vintage equipment as well as boutique tube amplifiers from brands like Budda.

• Height: 0.50 in.
• Length: 1.19 in.
• Fits ¼" shaft with set screw

Phenolic skirted knobs with a set screw and brass insert. These fluted round knobs are close matches for the classic knobs used on Orange Amps. Each knob features a painted dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts. 19mm Skirt:

• Height: 0.61 in. (15.5 mm)
• Diameter: 0.74 in. (19 mm)
• Fits ¼" shaft with set screw

28mm Skirt:

• Height: 0.61 in. (15.5 mm)
• Diameter: 1.1 in. (28 mm)
• Fits ¼" shaft with set screw

42mm Skirt:

• Height: 0.79 in. (20 mm)
• Diameter: 1.645 in. (42 mm)
• Fits ¼" shaft with set screw

Black with gold or silver cap. ¼" shaft with set screw. Replacement for Marshall. Measures 0.75" in height.