Knobs
Knob - Plastic, Set Screw, Neve / Marconi Style, Wing, Skirted, 1” Diameter
Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.
Colors Available:
$1.85
Knob - Plastic, Set Screw, Neve / Marconi Style, Skirted, 1” Diameter
Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line and a clear plastic skirt. The skirt diameter is 1 inch. Fits ¼” (6.35mm) pot shafts. For a non-skirted version see P-K398-X.
Colors Available:
$1.85
Knob - Chicken Head, set screw, brass inset
Colors Available:
- Fits ¼" Solid Shafts (Set Screw)
- Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
- Brass Set Screw and Insert
- High Quality Plastic
Starting at $1.30
Knob - Plastic, Set Screw, Neve / Marconi Style, 0.685” Diameter
Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.685 inches. Fits ¼” (6.35mm) pot shafts. Note: Pair with R-VADAPT-125 to fit 0.125” potentiometer shafts. For a skirted version see P-K397-X. See P-K696 for the dual concentric knob lower.
Colors Available:
$1.30
Knob - Chicken Head, Push-On, for knurled shaft
High quality black plastic chickenhead knob. 1-1/4" in length. Push-on for split knurled shaft.
Colors Available:
Starting at $1.20
Knob - Pointer, Skirted, RCA Style, 1.28” Diameter
Large vintage style skirted pointer knob. This knob is styled after the RCA “fester” knobs found on countless vintage electronics. The knobs feature a hex set screw, and fit ¼" solid shaft potentiometers.
Colors Available:
$1.15
Knob - Plastic, Set Screw, MXR Style, 1.0" Diameter
Large plastic knobs with set screw and brass insert. Similar to the knobs used on many classic Dunlop / MXR pedals. These knobs have a fluted grip with an indicator line as well as a dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts.
Colors Available:
Starting at $1.15
Knob - Large, Indicator Line, Set Screw
Large knob with line indicator and set screw similar in style to the Davies 1500 and 1510 knobs. Pairs well with P-K380X. Fits ¼” (6.35mm) pot shafts.
Colors Available:
- Knob Height = 0.60"
- Pointer Diameter = 1.06"
- Fits 1/4" shaft with set screw
- Oversized Davies 1510 Clone
$1.10
Knob - Chicken Head, Raised, set screw, brass insert
Raised plastic chickenhead knob with brass insert and set screw. 1.20" in length. Davies 2300 clone.
Colors Available:
$1.10
Knob - Pointer, Large, Knurled, vintage index line
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.
Colors Available:
$1.10
Knob - Plastic, Set Screw, Neve / Marconi Style, 0.495” Diameter
Plastic knobs with a set screw and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.495 inches. Fits ¼” (6.35mm) pot shafts.
Colors Available:
$0.99
Knob - Chicken Head, mini, high-quality, brass insert, Set Screw
High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.
Colors Available:
Starting at $0.99
Knob - Plastic, Set Screw, Knurled w/ Top Line, 0.724" Diameter
Medium sized plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. This style of knob can be found on some versions of the ProCo Rat. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K410-X.
Colors Available:
$0.98
Knob - Scalloped Edge, Indicator Line, Set Screw, Brass Insert
The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.
Colors Available:
$0.95
Knob - Plastic, Set Screw, Knurled w/ Top Line, 0.542" Diameter
Small plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K411-X.
Colors Available:
$0.95
Knob - Small, Indicator Line, set screw
The P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.
Colors Available:
Starting at $0.85
Knob - Plastic, Set Screw, Small MXR Style, 0.75" diameter
Small plastic knobs with set screw and brass insert. Similar to the small knobs used on many Dunlop / MXR pedals. These knobs have a fluted grip with an indicator line as well as a dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts.
Colors Available:
Starting at $0.85
Knob - Plastic, Set Screw, Fluted w/ Line, 0.745" Diameter
Plastic control knob with set screw and brass insert. This knob features a distinctive fluting similar to the popular Philmore 3010 knob. This style is also similar to the small skirted MXR knobs. Fits ¼” (6.35mm) pot shafts.
Colors Available:
$0.85
Knob - Plastic, Set Screw, Pinched w/ Line, 0.630" Diameter
Small plastic control knob with set screw and metal insert. This knob has a pinched grip similar to the Davies 1510 but features a smaller diameter and scooped cutout for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.
Colors Available:
Starting at $0.85
Knob - Scalloped Edge, Indicator Line, Set Screw
Set screw knob with indicator line and scalloped edge. Measures .50" in diameter and .6" in height. Davies 1900H clone
Colors Available:
$0.79
Knob - Mini Indicator, Set Screw, 15mm x 11mm
Mini fluted knob with infilled indicator line. Pairs well with the larger P-K850X. Fits ¼” (6.35mm) pot shafts.
Colors Available:
- Height: 11mm
- Diameter: 15mm
- Fits 1/4" shaft with set screw
Starting at $0.75