Knobs

Phenolic skirted knob with set screws and brass insert. This massive knob is a close match for the classic knobs used on Fairchild compressors like the 660 / 670. It features a V-shaped painted inlay indicator on the skirt as well as a dot indicator on the top of the grip. The large skirt has a diameter of 1.935 inches. Fits ¼” (6.35mm) pot shafts. Pairs nicely with P-K347-X (see photo)
$9.95

Phenolic skirted knobs with a set screw. These unique knobs closely match the style of knobs used on vintage test equipment, radios, and studio equipment and are similar to the Davies 4104, 4106, and 4107. They feature an inlay indicator line in the skirt. Fits ¼” (6.35mm) pot shafts.
Starting at $9.50

Colors Available:
- Height: 0.792 in. (20.1 mm)
- Diameter: 1.293 in. (33 mm)
- Fits ¼" shaft with set screw
$6.95

Genuine Fender® dual concentric knobs for Jazz Bass. Bottom knob fits ¼” solid shafts and top knob fits 3/16” solid shafts. Both attach with their included set screw. Top and bottom sold separately.
Starting at $5.25

Colors Available:
$4.75

Phenolic pointer knobs with a set screw and brass insert. These distinctive pointers are close matches for the classic knobs used on Fairchild compressors like the 660 / 670. Each pointer features a V-shaped painted inlay indicator. Fits ¼” (6.35mm) pot shafts. Pairs nicely with P-K348 (see photo)
Starting at $4.65

Large MXR knob with set screw for MXR pedals. Original Dunlop replacement part. Skirted knob with white line and dot indicator.
$3.65

High-quality USA made knobs from Davies Molding. The 1914 knob is the larger version of the classic 1900H found on countless synthesizers and pedals. This knob is made of solid phenolic and features an indicator line on the top. The knob pairs perfectly with the smaller diameter 1900 knobs such as the P-K801-BRASS-X as well as the skirted P-K234X knobs.
- Height: 0.50 in.
- Diameter: 0.75 in.
- Fits ¼" shaft with set screw
$3.55

High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
Davies 1913 (Large)
- Height: 0.50 in.
- Diameter: 0.75 in.
- Fits ¼" shaft with set screw
Davies 1913 (Large)
- Height: 0.625 in.
- Diameter: 1.13 in.
- Fits ¼" shaft with set screw
$2.75

High-quality USA made knobs from Davies Molding. The small skirted 1610 knob is made of solid phenolic and features an indicator line on the 0.91” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
- Height: 0.59 in.
- Diameter: 0.91 in.
- Fits ¼" shaft with set screw
The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
- Height: 0.69 in.
- Diameter: 1.5 in.
- Fits ¼" shaft with set screw
$2.75

Phenolic skirted knobs with a set screw and brass insert. These unique knobs closely match the RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. The RCA style knobs feature an inlay indicator line. Fits ¼” (6.35mm) pot shafts. 22mm Skirt:
26mm Skirt:
33mm Skirt:
40mm Skirt:
- Height: 0.495in. (12.6 mm)
- Diameter: 0.875 in. (22 mm)
- Fits ¼" shaft with set screw
26mm Skirt:
- Height: 0.656 in. (16.7 mm)
- Diameter: 1.02 in. (26 mm)
- Fits ¼" shaft with set screw
33mm Skirt:
- Height: 0.792 in. (20.1 mm)
- Diameter: 1.293 in. (33 mm)
- Fits ¼" shaft with set screw
40mm Skirt:
- Height: 0.865 in. (22 mm)
- Diameter: 1.568 in. (40 mm)
- Fits ¼" shaft with set screw
Starting at $2.50

Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.
$2.35

High-quality USA made knobs from Rogan Corp. These extra large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
A variety of different sizes are available from the PT Series.
- Height: 0.63 in.
- Diameter:1.25 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
A variety of different sizes are available from the PT Series.
$1.95

Cap Colors Available:
- Height: 15.1mm
- Diameter: 25.4mm
- Fits ¼" shaft with set screw
Starting at $1.85

High-quality USA made knobs from Rogan Corp. These large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
A variety of different sizes are available from the PT Series.
- Height: 0.45 in.
- Diameter: 0.84 in
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
A variety of different sizes are available from the PT Series.
$1.85

Small black plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top and a stylish vertical knurl. The style is a close match to the Boss middle knobs used on many pedals. Fits ¼” (6.35mm) pot shafts.
$1.75

High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
A variety of different sizes are available from the PT Series.
- Height: 0.71 in
- Diameter: 0.73 in
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
A variety of different sizes are available from the PT Series.
$1.75

High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K282P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272PS-W 2PS Medium Skirted Pointer
- Height: 0.68 in.
- Diameter: 0.50 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K282P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65

Colors Available:
- Height: 0.71 in.
- Diameter: 0.57 in.
- Fits 6mm D Shafts
- No indicator
A variety of different sizes are available from the PT Series.
$1.65

High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.
- Height: 0.68 in.
- Diameter: 0.50 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.
$1.65

High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
- Height: 0.71 in.
- Diameter: 0.57 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65

High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.
- Height: 0.84 in.
- Diameter: 0.62 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.
$1.65

High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
- Height: 0.84 in.
- Diameter: 0.62 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
$1.65

High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.
- Height: 0.55 in.
- Diameter: 0.45 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.
$1.65