Knobs

P-K314 Knob - Fender®, Witch Hat, Black Skirted for Blackface Amps
Fender® skirted knobs with numbers (1-10) as used on Fender® amps. Pack of 6 for 1/4" solid shaft pots.
$19.95
package of 6
P-KM200 Knobs - Marshall, for Amplifiers, push-on
Genuine Marshall push-on replacement knobs designed for use on Marshall amplifiers. Fits coarse knurled pot shafts.

For a similar generic knob, see P-K391.

$11.95
package of 8
Out of Stock
P-K450 Knob - Marshall, Black, Gold Top, Push-On, D Shaft
For current JVM and older JCM2000 or any 1/4" D-Shaft potentiometer
For a similar generic knob, see P-K393.
$11.75
package of 8
On Backorder
P-K328 Knob - Fender, Black 1-10, for Princeton 65 DSP
Original Fender Amplifier Knobs. Rotary "1-10" Numbered Style for push-on D-shaft. Silver cap. Package of 4. 7/8" D x 3/4" H.
Note: The flat is oriented to the space between 1 and 10.
$8.65
package of 4
P-ECB-229 Knob - Dunlop, Jimi Hendrix Fuzz Face JH-F1
Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.
$7.65
P-K200X Knob - Orange brand, top hat, set screw
Original Orange™ amp knob with hex set screw. Fits 6 mm diameter shaft. Black top-hat style knob with with white dot indicator.
Starting at $7.15
P-K330X Knobs - Fender®, Stratocaster, 1 Volume, 2 Tone
Colors Available:
Original Fender Replacement Knobs For Strat. Push-On. Fits both coarse and fine knurled pots.
Starting at $6.25
package of 3
P-K625-X Knob - Solid Brass, Vintage "Cupcake" Style, Set Screw
Colors Available:
Solid brass knobs with set screws. These circular knobs are a vintage radio style used on many amplifiers such as the Blonde / Brown era of Fender®. They feature a plated brass construction with an infilled indicator line and a vertical knurl for grip. They also feature a counterbore which allows the knobs to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.
  • Height: 0.469 in.
  • Diameter: 0.787 in.
  • Fits ¼" shaft with set screw
Starting at $5.65
P-K309 Knob - Plastic, Set Screw, Raytheon Style, Skirted, 1.812” Diameter
Plastic skirted knob with set screws and brass insert. This massive knob features a textured matte finish and closely matches the look of Raytheon knobs used on vintage test equipment, radios, and studio equipment. It features a painted inlay arrow indicator on the skirt. The large skirt has a diameter of 1.812 inches. Fits ¼” (6.35mm) pot shafts.
$4.99
P-K771S-X Knob - Rogan, RB-67 Series, Medium, Skirted
Colors Available:
High-quality USA made knobs from Rogan Corp. These medium knobs feature a metal insert, spun aluminum inlay, and a skirt with an infilled arrow indicator. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers..
  • Height: 0.77 in.
  • Diameter: 1.15 in.
  • Fits ¼" shaft with set screws

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted
$4.25
P-K312X Knob - Aluminum, Set Screw, Notched Tip, 1.25" Diameter
Colors Available:
1.25" diameter knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.
$3.99
P-K324 Knob - Ampeg, Classic, D Shaft with indicator line
Ampeg classic knob. D shaft. Original Ampeg replacement part.
$3.95
P-K770S-X Knob - Rogan, RB-67 Series, Small, Skirted
Colors Available:
High-quality USA made knobs from Rogan Corp. These small knobs feature a metal insert, spun aluminum inlay, and a skirt with an infilled arrow indicator. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers..
  • Height: 0.66 in.
  • Diameter: 0.90 in
  • Fits ¼" shaft with set screw

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted
$3.95
P-K222X Knob - Davies, 8005 & 8010, Daka-ware, Vintage Pointer
High-quality USA made knobs from Davies Molding. The 8000 series knobs are made of solid phenolic and feature a classic teardrop design. The detailed design makes these knobs a striking addition to any piece of equipment. This unique design has been used on a variety of tools and instruments. Davies 8005 (Small)
  • Height: 0.78 in.
  • Length: 1.05 in.
  • Fits ¼" shaft with set screw

Davies 8010 (Large)
  • Height: 1 in.
  • Length: 1.25 in.
  • Fits ¼" shaft with set screw
$3.95
P-K314-1 Knob - Witch Hat, Black 1-10, Skirted, Set Screw, Thin Numbers
Black knob with white lettering, skirted, for blackface/silverface amps, with set screw, sold individually. Replacement for Fender: 099-0930-000
$3.65
P-K225 Knob - Davies, 1700, Daka-ware, Pinched
High-quality USA made knobs from Davies Molding. The Davies 1700 is made of solid phenolic and has a classic style that fits nicely on any piece of equipment. The 1700 can be found on vintage radios and amplifiers, most notably the Filmosound projector amps that are popularly converted to guitar amplifiers.
  • Height: 0.59 in.
  • Diameter: 0.75 in.
  • Fits ¼" shaft with set screw
$3.55
P-K155-3 Knob - Rogan, 155 Series, Witch Hat, Large, Arrow
High-quality USA made knobs from Rogan Corp. These large phenolic knobs feature a brushed aluminum inlay and a skirt with an arrow indicator. With its 1.5” skirt diameter, this knob is much larger than the standard Fender and Music Man witch hat knobs. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
  • Height: 0.81 in.
  • Diameter: 1.50 in.
  • Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-2 0-10 Witch Hat
$3.35
P-K155-2 Knob - Rogan, 155 Series, Witch Hat, 0-10
High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay and a skirt numbered 0-10. This knob was used on many vintage Music Man amps and the 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
  • Height: 0.65 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-3 Large Witch Hat w/ Arrow
$3.15
P-K232X Knob - Davies, 1600 & 1610, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The small skirted 1610 knob is made of solid phenolic and features an indicator line on the 0.91” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
  • Height: 0.59 in.
  • Diameter: 0.91 in.
  • Fits ¼" shaft with set screw

The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
  • Height: 0.69 in.
  • Diameter: 1.5 in.
  • Fits ¼" shaft with set screw
$3.09
P-K310X Knob - Aluminum, Notched Tip Indicator, Set Screw, .75" Diameter
Colors Available:
¾" dia. Knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.
$2.99
P-K415-X Knob - Phenolic, Set Screw, Orange Amp Style, Skirted
Phenolic skirted knobs with a set screw and brass insert. These fluted round knobs are close matches for the classic knobs used on Orange Amps. Each knob features a painted dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts. 19mm Skirt:
  • Height: 0.61 in. (15.5 mm)
  • Diameter: 0.74 in. (19 mm)
  • Fits ¼" shaft with set screw

28mm Skirt:
  • Height: 0.61 in. (15.5 mm)
  • Diameter: 1.1 in. (28 mm)
  • Fits ¼" shaft with set screw

42mm Skirt:
  • Height: 0.79 in. (20 mm)
  • Diameter: 1.645 in. (42 mm)
  • Fits ¼" shaft with set screw
Starting at $2.99
P-K228 Knob - Davies, 2310, Daka-ware, Triangle Pointer
High-quality USA made knobs from Davies Molding. This vintage-style 2310 pointer knob is made of solid phenolic and features a unique triangular shape. This classic design has fine vertical ridges on the sides providing grip when in use. The 2310 can be found on vintage equipment as well as boutique tube amplifiers from brands like Budda.
  • Height: 0.50 in.
  • Length: 1.19 in.
  • Fits ¼" shaft with set screw
$2.85
P-K155-1 Knob - Rogan, 155 Series, Witch Hat, Small Skirt, Indicator Line
High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay, a small skirt and an infilled indicator line. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
  • Height: 0.62 in.
  • Diameter: 0.84 in.
  • Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-2 0-10 Witch Hat P-K155-3 Large Witch Hat w/ Arrow
$2.75
P-K770-X Knob - Rogan, RB-67 Series, Small
Colors Available:
High-quality USA made knobs from Rogan Corp. These small knobs feature a metal insert and a spun aluminum inlay with a black indicator line. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers.
  • Height: 0.48 in.
  • Diameter: 0.51 in.
  • Fits ¼" shaft with set screws

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted
$2.65
Don't see what you're looking for? Send us your product suggestions!