Knobs

Original Fender chicken head knob. Black, comes in a package of six. Set screw. For 1/4" solid shaft pots.

For current JVM and older JCM2000 or any 1/4" D-Shaft potentiometer
For a similar generic knob, see P-K393.

Solid brass knobs with set screws. These circular knobs are a vintage radio style used on many amplifiers such as the Blonde / Brown era of Fender®. They feature a plated brass construction with an infilled indicator line and a vertical knurl for grip. They also feature a counterbore which allows the knobs to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

• Height: 0.469 in.
• Diameter: 0.787 in.
• Fits ¼" shaft with set screw

Genuine Fender® dual concentric knobs for Jazz Bass. Bottom knob fits ¼” solid shafts and top knob fits 3/16” solid shafts. Both attach with their included set screw. Top and bottom sold separately.

1.25" diameter knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.

Ampeg classic knob. D shaft. Original Ampeg replacement part.

Genuine Dunlop / MXR large aluminum knob for use with T18 knurled pot shafts. This rugged aluminum knob features a white indicator line and a diamond cut knurl for grip when using it. This high end knob looks great on pedals, amplifiers, and other projects.

Genuine Dunlop replacement small knurled knob for MXR pedals. Push -on style knob designed for use with coarse knurled shafts.

High-quality USA made knobs from Davies Molding. The 1914 knob is the larger version of the classic 1900H found on countless synthesizers and pedals. This knob is made of solid phenolic and features an indicator line on the top. The knob pairs perfectly with the smaller diameter 1900 knobs such as the P-K801-BRASS-X as well as the skirted P-K234X knobs.

• Height: 0.50 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

Anodized aluminum knob with channeled indicator line and set screw. This slim, solid aluminum knob has a diamond knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

• Height: 0.56 in.
• Diameter: 0.496 in.
• Fits ¼" shaft with set screw

Solid aluminum knob with a classic chicken head design. This knob has an infilled indicator line and counterbored base to hide potentiometer nuts. Fits 0.25” (6.35mm) shafts.

• Height: 0.54 in. (13.72 mm)
• Length: 1.25 in. (31.75 mm)
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. This vintage-style 2150 pointer knob is made of solid phenolic and features an infilled indicator line. The detailed design has a mixture of ridges, curves and lines giving it a distinctively vintage appearance. The 2150 can be found on vintage equipment such as the Echoplex tape delay and test equipment from RCA and National Radio Company.

• Height: 0.56 in.
• Length: 1.25 in.
• Fits ¼" shaft with set screw

Black pointer with white line. Fits a 3/16" knurled shafts. Push on Peavey part: 70902145

¾" dia. Knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.

Black with grey line, Set screw Peavey part: 70902033

High-quality USA made knobs from Davies Molding. The large 1500 stove-style knob is made of solid phenolic and features an indicator line. The knob has a diameter of 1.125” with a .425” wide grip that runs the length of the entire knob. This classic Davies knob has been used on countless vintage electronics spanning many decades of use.

• Height: 0.56 in
• Diameter: 1.125 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.

• Height: 0.50 in.
• Length: 1.13 in.
• Fits ¼" shaft with set screw

Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K310X.

Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.5”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K611-X. For a brushed finish version of this knob, see P-K655X.

Generic white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.

Solid aluminum control knob with set screw. This knob has a pinched grip and is similar in size and appearance to the Davies 1510 but with sharper angles for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.

• Height: 0.575 in. (14.61 mm)
• Diameter: 0.75 in. (19.05 mm)
• Fits ¼" shaft with set screw

High quality phenolic knob with a classic chicken head design. This knob has an infilled indicator line. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.485 in.
• Length: 1.25 in.
• Fits ¼" shaft with set screw
• Brass Insert
• High Quality Phenolic

Anodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

Small black plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top and a stylish vertical knurl. The style is a close match to the Boss middle knobs used on many pedals. Fits ¼” (6.35mm) pot shafts.