Knobs

Solid aluminum knobs with set screws. These circular knobs are a close match for the classic knobs used on Baldwin-Burns guitars and effects such as the Buzzaround. They feature a solid aluminum construction with a concave top and a vertical knurl for grip. Fits ¼” (6.35mm) pot shafts.

• Height: 0.442 in.
• Diameter: 0.722 in.
• Fits ¼" shaft with set screw

Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.5”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K611-X. For a brushed finish version of this knob, see P-K655X.

Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K310X.

¾" dia. Knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.

Solid aluminum knob with a classic chicken head design. This knob has an infilled indicator line and counterbored base to hide potentiometer nuts. Fits 0.25” (6.35mm) shafts.

• Height: 0.54 in. (13.72 mm)
• Length: 1.25 in. (31.75 mm)
• Fits ¼" shaft with set screw

Anodized aluminum knob with channeled indicator line and set screw. This slim, solid aluminum knob has a diamond knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

• Height: 0.56 in.
• Diameter: 0.496 in.
• Fits ¼" shaft with set screw

1.25" diameter knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.

Solid aluminum control knob with set screw. This knob has a pinched grip and is similar in size and appearance to the Davies 1510 but with sharper angles for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.

• Height: 0.575 in. (14.61 mm)
• Diameter: 0.75 in. (19.05 mm)
• Fits ¼" shaft with set screw

Anodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

Black with cap, shorter profile than P-K340. Measures 0.59" in height. Set screw.

Black Marshall-style knobs with a silver cap. This is the taller 0.766” version of this knob. The silver cap has no indicator line matching those found on vintage fuzz pedals such as the Supa Fuzz, Tone Bender Professional MKII, Shatterbox, and MKIII and MKIV Tone Benders. Fits ¼" shaft pots using a slotted set screw.

• Height: 0.766 in.
• Top Diameter:0.594 in.
• Bottom Diameter:0.766 in.
• Fits ¼" shaft with set screw

High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.

Raised plastic chickenhead knob with brass insert and set screw. 1.20" in length. Davies 2300 clone.

• Fits ¼" Solid Shafts (Set Screw)
• Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
• Brass Set Screw and Insert
• High Quality Plastic

High quality chicken head knobs that resemble the style of knob found on the Zonk Machine II and Shatterbox fuzz pedals. The Zonk chicken head knob has a contoured center band with a textured finish. The outer dome has a shiny finish offering a visual contrast. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.75 in.
• Length: 1.065 in.
• Fits ¼" shaft with set screw

Black K5 knob with gold or silver cap and long indicator line. ¼" shaft with set screw. Replacement for Marshall. Measures 0.75" in height. See P-K342-NOI for a version with no indicator line.

High-quality USA made knobs from Davies Molding. The small 1400 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals and audio equipment such as the Pultec EQP-1A.

• Height: 0.38 in.
• Length: 0.84 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.

• Height: 0.50 in.
• Length: 1.13 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. The large 1500 stove-style knob is made of solid phenolic and features an indicator line. The knob has a diameter of 1.125” with a .425” wide grip that runs the length of the entire knob. This classic Davies knob has been used on countless vintage electronics spanning many decades of use.

• Height: 0.56 in
• Diameter: 1.125 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. The Davies 1700 is made of solid phenolic and has a classic style that fits nicely on any piece of equipment. The 1700 can be found on vintage radios and amplifiers, most notably the Filmosound projector amps that are popularly converted to guitar amplifiers.

• Height: 0.59 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. The 1914 knob is the larger version of the classic 1900H found on countless synthesizers and pedals. This knob is made of solid phenolic and features an indicator line on the top. The knob pairs perfectly with the smaller diameter 1900 knobs such as the P-K801-BRASS-X as well as the skirted P-K234X knobs.

• Height: 0.50 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. This vintage-style 2150 pointer knob is made of solid phenolic and features an infilled indicator line. The detailed design has a mixture of ridges, curves and lines giving it a distinctively vintage appearance. The 2150 can be found on vintage equipment such as the Echoplex tape delay and test equipment from RCA and National Radio Company.

• Height: 0.56 in.
• Length: 1.25 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. This vintage-style 2310 pointer knob is made of solid phenolic and features a unique triangular shape. This classic design has fine vertical ridges on the sides providing grip when in use. The 2310 can be found on vintage equipment as well as boutique tube amplifiers from brands like Budda.

• Height: 0.50 in.
• Length: 1.19 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. The 8000 series knobs are made of solid phenolic and feature a classic teardrop design. The detailed design makes these knobs a striking addition to any piece of equipment. This unique design has been used on a variety of tools and instruments. Davies 8005 (Small)

• Height: 0.78 in.
• Length: 1.05 in.
• Fits ¼" shaft with set screw

Davies 8010 (Large)

• Height: 1 in.
• Length: 1.25 in.
• Fits ¼" shaft with set screw