Knobs

Phenolic skirted knob with set screws and brass insert. This massive knob is a close match for the classic knobs used on Fairchild compressors like the 660 / 670. It features a V-shaped painted inlay indicator on the skirt as well as a dot indicator on the top of the grip. The large skirt has a diameter of 1.935 inches. Fits ¼” (6.35mm) pot shafts. Pairs nicely with P-K347-X (see photo)
$9.95

Colors Available:
- Height: 0.792 in. (20.1 mm)
- Diameter: 1.293 in. (33 mm)
- Fits ¼" shaft with set screw
$6.95

Package of 8
For current JVM and older JCM2000 or any 1/4" D-Shaft potentiometer
$11.75

High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
- Height: 0.71 in.
- Diameter: 0.57 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65

Package of 8
Colors Available:
Starting at $7.60

Package of 2
Original Fender knobs for the Telecaster. Chrome Dome.
Starting at $15.65

High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.
- Height: 0.84 in.
- Diameter: 0.62 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.
$1.65

Metal knobs with set screws and brass insert. This knob is a close match for the lower section of the dual concentric knobs used on Marconi radios and Neve consoles. It features an inlay indicator line and a diamond pattern grip. The diameter is 0.99 inch. Pairs with P-K396-X . Fits ¼” (6.35mm) pot shafts.
Note: Knob is sold separately
Note: Knob is sold separately
$5.95

High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
- Height: 0.84 in.
- Diameter: 0.62 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
$1.65

Gibson style top hat knob. 24 spline (for knurled split shaft pots).
$2.25

Solid wood knobs in the art deco style found on many D'Angelico guitars. The three inlaid lines serve as the indicator. Fits 6mm T24 (fine) knurled shafts.
- Height: 0.6 in.
- Diameter: 0.975 in.
- Fits T24 Knurled Shafts
$7.50

Genuine Dunlop / MXR large aluminum knob for use with T18 knurled pot shafts. This rugged aluminum knob features a white indicator line and a diamond cut knurl for grip when using it. This high end knob looks great on pedals, amplifiers, and other projects.
$3.00

High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
A variety of different sizes are available from the PT Series.
- Height: 0.71 in
- Diameter: 0.73 in
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
A variety of different sizes are available from the PT Series.
$1.75

Package of 12
Original Fender Knob spacers, for use with push-on knobs. Bushings slide over pot shafts and stabilizes the shaft.
$4.95

High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K281P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
- Height: 0.55 in.
- Diameter: 0.45 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K281P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65

Colors Available:
Starting at $4.95

Package of 4
Original Fender Amplifier Knobs. Rotary "1-10" Numbered Style for push-on D-shaft. Silver cap. Package of 4. 7/8" D x 3/4" H.
$8.65

Package of 6
Genuine Fender® Pure Vintage Radio Amplifier Knobs. From tone and volume knobs to pickup covers, bridge covers and more, Pure Vintage knobs and covers let you cosmetically customize your instrument or amplifier like never before. These genuine replacement parts are created with period-correct personality in mind to the same specifications as early Fender parts, allowing players to give any Fender amp, guitar or bass a shot of vintage-accurate looks and tone.- Set of six ribbed replacement amplifier control knobs with indicator lines
- Introduced on Blonde and Brown-era amplifiers
- Used on '63 Fender Tube Reverb, Vibroverb and Vibro-King® amplifiers
- Fits most 1/4" solid shaft potentiometers on vintage and modern amplifiers and guitars
$18.95

Colors Available:
$4.75

Original Marshall, brown with gold cap, push on. 5/8" height. For 18 teeth knurled pot shafts. Used on the MG100HDFX, G100RCD, and other models. Sold individually. Note: The brown color found on the body of the knob is very subtle.
$3.95

High-quality USA made knobs from Rogan Corp. These medium, skirted knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
A variety of different sizes are available from the PT Series.
- Height: 0.84 in.
- Diameter: 0.62 in.
- Fits 6mm D Shafts
- No indicator
A variety of different sizes are available from the PT Series.
$1.65

High-quality USA made knobs from Rogan Corp. These extra large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
A variety of different sizes are available from the PT Series.
- Height: 0.63 in.
- Diameter:1.25 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
A variety of different sizes are available from the PT Series.
$1.95

Plastic skirted knob with set screws and brass insert. This massive knob features a textured matte finish and closely matches the look of Raytheon knobs used on vintage test equipment, radios, and studio equipment. It features a painted inlay arrow indicator on the skirt. The large skirt has a diameter of 1.812 inches. Fits ¼” (6.35mm) pot shafts.
$4.95

Black with grey line, Set screw
Peavey part: 70902033
Peavey part: 70902033
$2.75