Knobs

High-quality USA made knobs from Rogan Corp. These large phenolic knobs feature a brushed aluminum inlay and a skirt with an arrow indicator. With its 1.5” skirt diameter, this knob is much larger than the standard Fender and Music Man witch hat knobs. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.

• Height: 0.81 in.
• Diameter: 1.50 in.
• Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-2 0-10 Witch Hat

Mid-sized black plastic control knob with set screw and brass insert. This knob is similar in appearance to the classic MXR knobs but with a smaller diameter. It features a fluted grip with an indicator line along with a small skirt with a dot indicator. Fits ¼” (6.35mm) pot shafts.

High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay, a small skirt and an infilled indicator line. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.

• Height: 0.62 in.
• Diameter: 0.84 in.
• Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-2 0-10 Witch Hat P-K155-3 Large Witch Hat w/ Arrow

Genuine Dunlop replacement small knurled knob for MXR pedals. Push -on style knob designed for use with coarse knurled shafts.

High-quality USA made knobs from Davies Molding. The large 1500 stove-style knob is made of solid phenolic and features an indicator line. The knob has a diameter of 1.125” with a .425” wide grip that runs the length of the entire knob. This classic Davies knob has been used on countless vintage electronics spanning many decades of use.

• Height: 0.56 in
• Diameter: 1.125 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.71 in.
• Diameter:0.57 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.

Sold individually. USA made vintage 90 degree blunt tip pointer washer made from steel. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs.

High-quality USA made knobs from Davies Molding. The Davies 1700 is made of solid phenolic and has a classic style that fits nicely on any piece of equipment. The 1700 can be found on vintage radios and amplifiers, most notably the Filmosound projector amps that are popularly converted to guitar amplifiers.

• Height: 0.59 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

Set screw. Designed to replicate an "aged" look.

High-quality USA made knobs from Rogan Corp. These solid phenolic knobs feature a brushed metal inlay in their unique diamond shaped grip. Often referred to as TV or cooker knobs, these genuine Rogans are used in a variety of Rickenbacker guitars and basses. In addition to the diamond shaped grip, they feature a large skirt and a small notched indicator. Fits ¼" shaft potentiometers.

• Height: 0.635 in.
• Length: 1.497 in.
• Fits ¼" shaft with set screw

High quality phenolic knob with a classic chicken head design. This knob has an infilled indicator line. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.485 in.
• Length: 1.25 in.
• Fits ¼" shaft with set screw
• Brass Insert
• High Quality Phenolic

Original Fender® Jazz Bass knob set, black, package of 3.

Fender Telecaster / P-Bass knurled barrel knobs in chrome.

Genuine Dunlop replacement knob cover for smaller control knobs found on many MXR pedals. This knob cover is also compatible with our P-K344 control knob.

Genuine Marshall push-on replacement knobs designed for use on Marshall amplifiers. Fits coarse knurled pot shafts.

Black plastic control knob for both coarse and fine knurled shafts. This distinctive pointer knob is similar in style to the Davies 1550 but in a smaller size. It features an inlay line indicator. The skirt has a diameter of 0.93 inches. Fits T18 and T24 knurled pot shafts.

Original Orange™ amp knob with hex set screw. Fits 6 mm diameter shaft. Black top-hat style knob with with white dot indicator.

High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.68 in.
• Diameter: 0.50 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.

High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.55 in.
• Diameter: 0.45 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.

Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.

Genuine Fender® dual concentric knobs for the 1960 Jazz Bass. The bottom knob fits ¼” solid shafts and the top knob fits 3/16” solid shafts. Both attach with their included set screw. Top and bottom sold separately.

This nickel-plated brass adapter sleeve converts a 0.125 in. (3.17mm) shaft potentiometer to ¼" shaft (6.35mm), allowing for ¼" knobs to be used on a wider range of potentiometers. The cutout on the sleeve allows the set screw of the knob to secure directly to the shaft of the pot. Depending on the knob used, a longer set screw can be required.

Original Fender chicken head knob. Black, comes in a package of six. Set screw. For 1/4" solid shaft pots.

High-quality USA made knobs from Davies Molding. The 8000 series knobs are made of solid phenolic and feature a classic teardrop design. The detailed design makes these knobs a striking addition to any piece of equipment. This unique design has been used on a variety of tools and instruments. Davies 8005 (Small)

• Height: 0.78 in.
• Length: 1.05 in.
• Fits ¼" shaft with set screw

Davies 8010 (Large)

• Height: 1 in.
• Length: 1.25 in.
• Fits ¼" shaft with set screw