Knobs

Gibson style top hat knob. Fits fine knurled pot shafts.
$2.25

Colors Available:
$0.95

Genuine Fender® dual concentric knobs for the 1960 Jazz Bass. The bottom knob fits ¼” solid shafts and the top knob fits 3/16” solid shafts. Both attach with their included set screw. Top and bottom sold separately.
Starting at $10.45

Colors Available:
Starting at $0.99

High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
- Height: 0.84 in.
- Diameter: 0.62 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
$1.65

High-quality USA made knobs from Davies Molding. The small skirted 1610 knob is made of solid phenolic and features an indicator line on the 0.91” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
- Height: 0.59 in.
- Diameter: 0.91 in.
- Fits ¼" shaft with set screw
The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
- Height: 0.69 in.
- Diameter: 1.5 in.
- Fits ¼" shaft with set screw
$2.75

Package of 2
Fender Telecaster / P-Bass knurled barrel knobs in chrome.
$14.65

Black plastic control knob for both coarse and fine knurled shafts. This distinctive pointer knob is similar in style to the Davies 1550 but in a smaller size. It features an inlay line indicator. The skirt has a diameter of 0.93 inches. Fits T18 and T24 knurled pot shafts.
$0.85

Sold individually. Slightly thicker numbers than P-K314-1. Made in Taiwan.
$2.25

Colors Available:
$2.99

Colors Available:
$0.85

High quality chicken head style knob with a unique angular design. The stealth chicken head has a thin band that extends above the base allowing for easy manipulation of the knob. This solid phenolic knob has an infilled indicator line. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
- Height: 0.7 in.
- Length: 1.408 in.
- Fits ¼" shaft with set screw
$1.99

Colors Available:
$0.99

High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.
- Height: 0.55 in.
- Diameter: 0.45 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.
$1.65

High-quality USA made knobs from Davies Molding. The large 1500 stove-style knob is made of solid phenolic and features an indicator line. The knob has a diameter of 1.125” with a .425” wide grip that runs the length of the entire knob. This classic Davies knob has been used on countless vintage electronics spanning many decades of use.
- Height: 0.56 in
- Diameter: 1.125 in.
- Fits ¼" shaft with set screw
$2.85

Set screw with brass insert, ¼" shaft. Measures 1.28" diameter x .71" tall.
$1.55

Phenolic pointer knobs with a set screw and brass insert. These distinctive pointers are close matches for the classic knobs used on Fairchild compressors like the 660 / 670. Each pointer features a V-shaped painted inlay indicator. Fits ¼” (6.35mm) pot shafts. Pairs nicely with P-K348 (see photo)
Starting at $4.70

Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.
$2.40

Package of 6
Fender® skirted knobs with numbers (1-10) as used on Fender® amps. Pack of 6 for 1/4" solid shaft pots.
$18.95

Small black plastic control knob with set screw and brass insert. These unique knobs are similar in style to the Davies 1140. They have a thick decorative knurl. A white dot as well as a vertical cutout channel serve as the indicator. Fits ¼” (6.35mm) pot shafts.
$0.89

High quality phenolic pointer knob with a vintage design. The retro pointer has a thick band that extends above the base allowing for easy manipulation of the knob making it a great option for rotary controls and switches. This solid phenolic knob has an infilled indicator line with a decorative diamond shaped top. Fits 0.25” (6.35mm) shafts with set screw and brass insert. This knob pairs perfectly with the smaller P-K356 knob.
- Height: 0.85 in.
- Length: 1.63 in.
- Fits ¼" shaft with set screw
$2.20

Colors Available:
$6.55

High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
- Height: 0.71 in.
- Diameter:0.57 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
$1.65

High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
Davies 1913 (Large)
- Height: 0.50 in.
- Diameter: 0.75 in.
- Fits ¼" shaft with set screw
Davies 1913 (Large)
- Height: 0.625 in.
- Diameter: 1.13 in.
- Fits ¼" shaft with set screw
$2.75