Knobs

Transparent lampshade style knobs similar to the ones found on PRS guitars. The lampshade knob sits somewhere between a tophat knob and speed knob but with a unique deco design. These knobs feature 0-10 numbering and fit 6mm coarse knurl (T18) pot shafts.

• Height: 0.5 in.
• Diameter: 0.94 in.
• Fits 6mm T18 knurled pot shafts

Micro sized plastic control knobs for coarse knurled shafts. These super slim knobs are perfect for cramped panels, adding mods, and sub-controls on units with a variety of knobs. They have an infilled dot indicator. This style of knob can be found on many eurorack modules from Befaco and others. Fits T18 knurled shafts.

Plastic control knob with set screw and brass insert. This skirted knob is similar in style to the knobs found on many Boss pedals. It features a fluted grip with a radial-brushed metal top. The indicator line extends from the top of the down down through the bottom of the skirt. Fits ¼” (6.35mm) pot shafts.
See P-K370X for a skirted version.

Plastic control knob with set screw and brass insert. This knob features a distinctive fluting similar to the popular Philmore 3010 knob. This style is also similar to the small skirted MXR knobs. Fits ¼” (6.35mm) pot shafts.

Small plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K411-X.

Medium sized plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. This style of knob can be found on some versions of the ProCo Rat. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K410-X.

Plastic knobs with a set screw and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.495 inches. Fits ¼” (6.35mm) pot shafts.

Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.685 inches. Fits ¼” (6.35mm) pot shafts. Note: Pair with R-VADAPT-125 to fit 0.125” potentiometer shafts. For a skirted version see P-K397-X. See P-K696 for the dual concentric knob lower.

Small plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top and a stylish vertical knurl. The style is similar to the Boss middle knobs used on many pedals. Fits ¼” (6.35mm) pot shafts.

Small black plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top and a stylish vertical knurl. The style is a close match to the Boss middle knobs used on many pedals. Fits ¼” (6.35mm) pot shafts.

Small plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top, a fine straight-knurl grip, and a vertical pointer. Fits ¼” (6.35mm) pot shafts.

This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs feature a slotted set screw, and fit ¼" solid shaft potentiometers. These are a close match to the Davies 1400.

• Height: 0.43 in.
• Length: 0.825 in.
• Fits ¼" shaft with set screw

.77" diameter x .62" tall. Fits both fine and coarse knurled pot shafts.

High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.55 in.
• Diameter: 0.45 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.

High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.

• Height: 0.55 in.
• Diameter: 0.45 in.
• Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K281P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer

High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.68 in.
• Diameter: 0.50 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.

High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.

• Height: 0.68 in.
• Diameter: 0.50 in.
• Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K282P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272PS-W 2PS Medium Skirted Pointer

Set screw knob with indicator line and scalloped edge. Measures .50" in diameter and .6" in height. Davies 1900H clone

The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.

High quality Marshall style knobs with set screws. These knobs are available with the classic gold and silver top caps as well as an all black version. These knobs use a slotted set screw and fit 1/4 in. (6.35mm) pot shafts. 0.77" diameter x 0.62" tall.

Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.

Solid brass knobs with set screws. These circular knobs are a vintage radio style used on many amplifiers such as the Blonde / Brown era of Fender®. They feature a plated brass construction with an infilled indicator line and a vertical knurl for grip. They also feature a counterbore which allows the knobs to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

• Height: 0.469 in.
• Diameter: 0.787 in.
• Fits ¼" shaft with set screw

Gibson style speed knob with embossed numbers. For 6mm 24 teeth knurled shaft.

Gibson style speed knob. For 24 teeth knurled shaft.