Knobs

P-K238X Knob - Davies, 1400, Daka-ware, Small, Pointer
Colors Available:
High-quality USA made knobs from Davies Molding. The small 1400 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals and audio equipment such as the Pultec EQP-1A.
  • Height: 0.38 in.
  • Length: 0.84 in.
  • Fits ¼" shaft with set screw
Starting at $1.75
P-K234X Knob - Davies, 1910 and 1913, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
  • Height: 0.50 in.
  • Diameter: 0.75 in.
  • Fits ¼" shaft with set screw

Davies 1913 (Large)
  • Height: 0.625 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw
$2.75
P-K353 Knob - Plastic, Set Screw, Vertical Line, 0.55" Diameter
Small black plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top and a stylish vertical knurl. The style is a close match to the Boss middle knobs used on many pedals. Fits ¼” (6.35mm) pot shafts.
$1.80
P-K389X Knob - Plastic, Set Screw, Neve / Marconi Style, Wing, Skirted, 1” Diameter
Colors Available:
Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.
$1.85
P-K611-X Knob - Aluminum, Matte Finish, Set Screw, Short Line, 0.75" Diameter
Colors Available:
Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K655X.
$2.25
P-K411-X Knob - Plastic, Set Screw, Knurled w/ Top Line, 0.724" Diameter
Colors Available:
Medium sized plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. This style of knob can be found on some versions of the ProCo Rat. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K410-X.
$0.98
P-ECB-131 Knob Cover - Dunlop, rubber, for MXR knobs
Replacement black rubber knob cover for Original MXR knob (P-ECB-130). Original Dunlop replacement part.
$2.19
P-K770S-X Knob - Rogan, RB-67 Series, Small, Skirted
Colors Available:
High-quality USA made knobs from Rogan Corp. These small knobs feature a metal insert, spun aluminum inlay, and a skirt with an infilled arrow indicator. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers..
  • Height: 0.66 in.
  • Diameter: 0.90 in
  • Fits ¼" shaft with set screw

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted
$3.95
P-K495X Knob - Chicken Head, Zonk Style, Set Screw
Colors Available:
High quality chicken head knobs that resemble the style of knob found on the Zonk Machine II and Shatterbox fuzz pedals. The Zonk chicken head knob has a contoured center band with a textured finish. The outer dome has a shiny finish offering a visual contrast. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.75 in.
  • Length: 1.065 in.
  • Fits ¼" shaft with set screw
$0.99
P-K802 Knob - Small Chicken Head, Black, Set Screw
Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.
$0.95
P-K330X Knobs - Fender®, Stratocaster, 1 Volume, 2 Tone
Package of 3
Colors Available:
Original Fender Replacement Knobs For Strat. Push-On. Fits both coarse and fine knurled pots.
Starting at $6.25
P-K910-X Knob - Plastic, Push-On, Micro, Dot Indicator, 0.305" Diameter
Colors Available:
Micro sized plastic control knobs for coarse knurled shafts. These super slim knobs are perfect for cramped panels, adding mods, and sub-controls on units with a variety of knobs. They have an infilled dot indicator. This style of knob can be found on many eurorack modules from Befaco and others. Fits T18 knurled shafts.
$0.55
P-K530X Knob - Vintage Cupcake, 1 Volume, 1 Tone, Push-On
Package of 2
Colors Available:
Cupcake push-on volume and tone knobs. 0.985" diameter, 0.625" tall These knobs are just perfect for that retro effect, whether you're restoring an old Kay or Harmony guitar, or even an old Philco radio! Press fits on both fine and coarse knurled pots.
$4.50
P-K547-X Knob - Top Hat, Gold with Silver Cap, Gibson Style
Gibson style top hat knob. Fits fine knurled pot shafts.
$2.25
P-K397-X Knob - Plastic, Set Screw, Neve / Marconi Style, Skirted, 1” Diameter
Colors Available:
Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line and a clear plastic skirt. The skirt diameter is 1 inch. Fits ¼” (6.35mm) pot shafts. For a non-skirted version see P-K398-X.
$1.85
P-K540X Knob - Speed, Gibson Style see-through
Colors Available:
Gibson style speed knob. For 24 teeth knurled shaft.
$1.95
P-ECB-229 Knob - Dunlop, Jimi Hendrix Fuzz Face JH-F1
Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.
$7.65
P-K550X Knob - Top Hat, Gibson Style see-through
Colors Available:
Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.
$1.95
P-K226 Knob - Davies, 2150, Daka-ware, Vintage Pointer
High-quality USA made knobs from Davies Molding. This vintage-style 2150 pointer knob is made of solid phenolic and features an infilled indicator line. The detailed design has a mixture of ridges, curves and lines giving it a distinctively vintage appearance. The 2150 can be found on vintage equipment such as the Echoplex tape delay and test equipment from RCA and National Radio Company.
  • Height: 0.56 in.
  • Length: 1.25 in.
  • Fits ¼" shaft with set screw
$3.45
P-K394X Knob - Fender®, Dual Concentric, For Jazz Bass
Genuine Fender® dual concentric knobs for Jazz Bass. Bottom knob fits ¼” solid shafts and top knob fits 3/16” solid shafts. Both attach with their included set screw. Top and bottom sold separately.
Starting at $5.25
P-K548-X Knob - Top Hat, Black with Silver Cap, Gibson Style
Gibson style top hat knob. Fits fine knurled pot shafts.
$2.25
P-K905 Knob - Chicken Head, Mini, High-quality, Push-On, T18
High quality miniature chicken head knob for coarse knurled shafts. 0.90" long nose to tail. Mini Davies 2300 clone. Fits T18 knurled shafts. For a solid shaft version of this knob, see P-K900X.
$0.65
P-K399-X Knob - Pointer, Skirted, RCA Style, 1.28” Diameter
Colors Available:
Large vintage style skirted pointer knob. This knob is styled after the RCA “fester” knobs found on countless vintage electronics. The knobs feature a hex set screw, and fit ¼" solid shaft potentiometers.
$1.15
R-VADAPT-4MM Potentiometer Adapter Sleeve - Converts 4mm shaft to 6mm
This nickel-plated steel adapter sleeve converts a 4mm shaft potentiometer to 6mm shaft, allowing for 6mm knobs to be used on a wider range of potentiometers. An additional 6mm to 6.35mm adapter R-VADAPT-25 can then be used to fit 1/4” knobs (sold seperately).
$0.85
Don't see what you're looking for? Send us your product suggestions!