Knobs

P-K232X Knob - Davies, 1600 & 1610, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The small skirted 1610 knob is made of solid phenolic and features an indicator line on the 0.91” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
  • Height: 0.59 in.
  • Diameter: 0.91 in.
  • Fits ¼" shaft with set screw

The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
  • Height: 0.69 in.
  • Diameter: 1.5 in.
  • Fits ¼" shaft with set screw
$3.09
P-K330X Knobs - Fender®, Stratocaster, 1 Volume, 2 Tone
Colors Available:
Original Fender Replacement Knobs For Strat. Push-On. Fits both coarse and fine knurled pots.
Starting at $6.25
package of 3
P-K397-X Knob - Plastic, Set Screw, Neve / Marconi Style, Skirted, 1” Diameter
Colors Available:
Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line and a clear plastic skirt. The skirt diameter is 1 inch. Fits ¼” (6.35mm) pot shafts. For a non-skirted version see P-K398-X.
$1.85
P-K399-X Knob - Pointer, Skirted, RCA Style, 1.28” Diameter
Colors Available:
Large vintage style skirted pointer knob. This knob is styled after the RCA “fester” knobs found on countless vintage electronics. The knobs feature a hex set screw, and fit ¼" solid shaft potentiometers.
$1.15
P-K283PS-W Knob - Rogan, PT Series, 3PS, Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in
  • Diameter: 0.73 in
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.75
P-K347-32-X Knob - Phenolic, Set Screw, Fairchild Style, Medium Pointer, 32mm
Colors Available:
Medium phenolic pointer knobs with a set screw and brass insert. These distinctive pointers are close matches for the classic knobs used on Fairchild compressors like the 660 / 670. Each pointer features a V-shaped painted inlay indicator. Fits ¼” (6.35mm) pot shafts.
  • Grip Diameter: 0.75 in.
  • Skirt Diameter: 0.935 in.
  • Length: 1.275 in.
  • Height: 0.765 in

Item Size P-K347-30-X Small P-K347-32-X Medium P-K347-52 Large P-K347-61 Extra Large
Starting at $4.99
P-K550X Knob - Top Hat, Gibson Style see-through
Colors Available:
Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.
$1.95
P-K549-X Knob - Top Hat, Black with Gold Cap, Gibson Style, Push-On
Black Gibson style top hat knobs with gold caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
$2.25
P-K349X Knob - Large, Indicator Line, Set Screw
Colors Available:
Large knob with line indicator and set screw similar in style to the Davies 1500 and 1510 knobs. Pairs well with P-K380X. Fits ¼” (6.35mm) pot shafts.
  • Knob Height = 0.60"
  • Pointer Diameter = 1.06"
  • Fits 1/4" shaft with set screw
  • Oversized Davies 1510 Clone
$1.10
P-K650X Knob - Aluminum, Set Screw, Skirted w/ Line, 1.125" Diameter
Colors Available:
Large skirted aluminum knob with indicator line and set screw. This solid aluminum knob has a 1.125 in. diameter skirt and ¾” grip that features a minimalistic style of fluting. The knob uses dual set screws to ensure no slipping once set on the pot’s shaft. Fits ¼” (6.35mm) pot shafts.
$4.75
P-K346 Knob - Plastic, Set Screw, MXR Style, 0.755" Diameter
Mid-sized black plastic control knob with set screw and brass insert. This knob is similar in appearance to the classic MXR knobs but with a smaller diameter. It features a fluted grip with an indicator line along with a small skirt with a dot indicator. Fits ¼” (6.35mm) pot shafts.
$1.15
P-K547-X Knob - Top Hat, Gold with Silver Cap, Gibson Style
Gold Gibson style top hat knobs with silver caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
$2.25
P-K282PS-W Knob - Rogan, PT Series, 2PS, Medium, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.
$1.65
P-K326 Knob - Plastic, Knurled Shaft, Skirted Pointer, 0.93" Diameter
Black plastic control knob for both coarse and fine knurled shafts. This distinctive pointer knob is similar in style to the Davies 1550 but in a smaller size. It features an inlay line indicator. The skirt has a diameter of 0.93 inches. Fits T18 and T24 knurled pot shafts.
$0.85
P-K227 Knob - Davies, 1919, Daka-ware, Large, Skirted Pointer
High-quality USA made knobs from Davies Molding. The large skirted 1919 pointer knob is made of solid phenolic and features an infilled indicator line. The pointer has an overall length of 1.25” and the skirt’s diameter is 1.13”. This knob shares design elements of the Davies 19xx knobs allowing for a uniform look while using a variety of knob shapes and styles.
  • Height: 0.625 in
  • Length: 1.25 in.
  • Fits ¼" shaft with set screw
$2.95
P-K348-X Knob - Phenolic, Set Screw, Fairchild Style, Skirted
Phenolic skirted knobs with set screws and brass inserts. These skirted circular knobs are a close match for the classic knobs used on Fairchild compressors like the 660 / 670. They feature a V-shaped painted inlay indicator on the skirt as well as a dot indicator on the top of the grip. Fits ¼” (6.35mm) pot shafts. Pairs nicely with P-K347-30-X, P-K347-32-X, P-K347-52, P-K347-61 (see photo)
Starting at $5.30
P-K546-X Knob - Top Hat, Gold with Gold Cap, Gibson Style
Gold Gibson style top hat knobs with gold caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
$2.25
P-K356 Knob - Black Control, White "V" Line
Set screw with brass insert, ¼" shaft. Measures 1.28" diameter x .71" tall.
$1.55
P-K808-X Knob - Plastic, Knurled Shaft, 808 Style
Black textured plastic knobs with orange infilled indicator lines similar to the original knobs found on Roland TR-808 drum machines.These knobs feature a straight knurled grip. The large and medium sizes both have a skirt with a notched indicator. All sizes fit 6mm T18 knurled pot shafts.
Starting at $0.95
P-K237 Knob - Davies, 1550, Daka-ware, Large, Skirted Pointer
High-quality USA made knobs from Davies Molding. The large skirted 1550 pointer knob is made of solid phenolic and features a white indicator line. The pointer has an overall length of 1.19” and the skirt’s diameter is 1.13”.
  • Height: 0.625 in
  • Length: 1.19 in.
  • Fits ¼" shaft with set screw
$1.75
P-K347-52 Knob - Phenolic, Set Screw, Fairchild Style, Large Pointer, 52.4mm
Large phenolic pointer knobs with a set screw and brass insert. These distinctive pointers are close matches for the classic knobs used on Fairchild compressors like the 660 / 670. Each pointer features a V-shaped painted inlay indicator. Fits ¼” (6.35mm) pot shafts.
  • Grip Diameter: 1.134 in.
  • Skirt Diameter: 1.319 in.
  • Length: 2.060 in.
  • Height: 0.745 in.
$4.95
P-K200X Knob - Orange brand, top hat, set screw
Original Orange™ amp knob with hex set screw. Fits 6 mm diameter shaft. Black top-hat style knob with with white dot indicator.
Starting at $7.15
P-K412 Knob - Phenolic, Set Screw, Stealth Chicken Head
High quality chicken head style knob with a unique angular design. The stealth chicken head has a thin band that extends above the base allowing for easy manipulation of the knob. This solid phenolic knob has an infilled indicator line. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.7 in.
  • Length: 1.408 in.
  • Fits ¼" shaft with set screw
$1.99
P-K314 Knob - Fender®, Witch Hat, Black Skirted for Blackface Amps
Fender® skirted knobs with numbers (1-10) as used on Fender® amps. Pack of 6 for 1/4" solid shaft pots.
$19.95
package of 6
Don't see what you're looking for? Send us your product suggestions!