Knobs

Generic white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.

• Fits ¼" Solid Shafts (Set Screw)
• Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
• Brass Set Screw and Insert
• High Quality Plastic

Small plastic knobs with set screw and brass insert. Similar to the small knobs used on many Dunlop / MXR pedals. These knobs have a fluted grip with an indicator line as well as a dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts.

High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.

The P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.

Mini fluted knob with infilled indicator line. Pairs well with the larger P-K850X. Fits ¼” (6.35mm) pot shafts.

• Height: 11mm
• Diameter: 15mm
• Fits 1/4" shaft with set screw

Anodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

Large plastic knobs with set screw and brass insert. Similar to the knobs used on many classic Dunlop / MXR pedals. These knobs have a fluted grip with an indicator line as well as a dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts.

Black knob with white line, silver top, set screw and brass insert. Fits ¼" shaft with set screw. These Boss style knobs come in a variety of sizes. See P-K383X for an unskirted version.

Raised plastic chickenhead knob with brass insert and set screw. 1.20" in length. Davies 2300 clone.

The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.

Sold individually. Slightly thicker numbers than P-K314-1. Made in Taiwan.

High quality Marshall style knobs with set screws. These knobs are available with the classic gold and silver top caps as well as an all black version. These knobs use a slotted set screw and fit 1/4 in. (6.35mm) pot shafts. 0.77" diameter x 0.62" tall.

Black with cap, shorter profile than P-K340. Measures 0.59" in height. Set screw.

Small plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top, a fine straight-knurl grip, and a vertical pointer. Fits ¼” (6.35mm) pot shafts.

Phenolic skirted knobs with a set screw and brass insert. These fluted round knobs are close matches for the classic knobs used on Orange Amps. Each knob features a painted dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts. 19mm Skirt:

• Height: 0.61 in. (15.5 mm)
• Diameter: 0.74 in. (19 mm)
• Fits ¼" shaft with set screw

28mm Skirt:

• Height: 0.61 in. (15.5 mm)
• Diameter: 1.1 in. (28 mm)
• Fits ¼" shaft with set screw

42mm Skirt:

• Height: 0.79 in. (20 mm)
• Diameter: 1.645 in. (42 mm)
• Fits ¼" shaft with set screw

Plastic control knob with set screw and brass insert. This skirted knob is similar in style to the knobs found on many Boss pedals. It features a fluted grip with a radial-brushed metal top. The indicator line extends from the top of the down down through the bottom of the skirt. Fits ¼” (6.35mm) pot shafts.
See P-K370X for a skirted version.

Black knob with white lettering, skirted, for blackface/silverface amps, with set screw, sold individually. Replacement for Fender: 099-0930-000

¾" dia. Knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.

Large black plastic control knob with set screw and brass insert. This skirted knob features a radial-brushed metal cap. The grip has large fluting with a white dot indicator on both the top of the grip and on the skirt of the knob. The style is similar to the Cosmo knobs found on many Moog synthesizers. Fits ¼” (6.35mm) pot shafts.

Large, knob with line indicator and set screw similar in style to the Davies 1500 and 1510 knobs. Pairs well with P-K380X. Fits ¼” (6.35mm) pot shafts.

• Knob Height = 0.60"
• Pointer Diameter = 1.06"
• Fits 1/4" shaft with set screw
• Oversized Davies 1510 Clone

Phenolic skirted knobs with a set screw and brass insert. These unique knobs closely match the RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. The RCA style knobs feature an inlay indicator line. Fits ¼” (6.35mm) pot shafts. 22mm Skirt:

• Height: 0.495in. (12.6 mm)
• Diameter: 0.875 in. (22 mm)
• Fits ¼" shaft with set screw

26mm Skirt:

• Height: 0.656 in. (16.7 mm)
• Diameter: 1.02 in. (26 mm)
• Fits ¼" shaft with set screw

33mm Skirt:

• Height: 0.792 in. (20.1 mm)
• Diameter: 1.293 in. (33 mm)
• Fits ¼" shaft with set screw

40mm Skirt:

• Height: 0.865 in. (22 mm)
• Diameter: 1.568 in. (40 mm)
• Fits ¼" shaft with set screw

This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.

Small plastic control knob with set screw and metal insert. This knob has a pinched grip similar to the Davies 1510 but features a smaller diameter and scooped cutout for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.