Knobs

Colors Available:
$0.95

Phenolic skirted knobs with a set screw and brass insert. These fluted round knobs are close matches for the classic knobs used on Orange Amps. Each knob features a painted dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts. 19mm Skirt:
28mm Skirt:
42mm Skirt:
- Height: 0.61 in. (15.5 mm)
- Diameter: 0.74 in. (19 mm)
- Fits ¼" shaft with set screw
28mm Skirt:
- Height: 0.61 in. (15.5 mm)
- Diameter: 1.1 in. (28 mm)
- Fits ¼" shaft with set screw
42mm Skirt:
- Height: 0.79 in. (20 mm)
- Diameter: 1.645 in. (42 mm)
- Fits ¼" shaft with set screw
Starting at $2.99

Phenolic skirted knobs with a set screw and brass insert. These unique knobs closely match the RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. The RCA style knobs feature an inlay indicator line. Fits ¼” (6.35mm) pot shafts. 22mm Skirt:
26mm Skirt:
33mm Skirt:
40mm Skirt:
- Height: 0.495in. (12.6 mm)
- Diameter: 0.875 in. (22 mm)
- Fits ¼" shaft with set screw
26mm Skirt:
- Height: 0.656 in. (16.7 mm)
- Diameter: 1.02 in. (26 mm)
- Fits ¼" shaft with set screw
33mm Skirt:
- Height: 0.792 in. (20.1 mm)
- Diameter: 1.293 in. (33 mm)
- Fits ¼" shaft with set screw
40mm Skirt:
- Height: 0.865 in. (22 mm)
- Diameter: 1.568 in. (40 mm)
- Fits ¼" shaft with set screw
Starting at $2.55

Colors Available:
Starting at $0.99

Colors Available:
$2.19

Colors Available:
- Height: 0.50 in.
- Length: 1.13 in.
- Fits ¼" shaft with set screw
Starting at $1.99

Cap Colors Available:
- Height: 15.1mm
- Diameter: 25.4mm
- Fits ¼" shaft with set screw
Starting at $1.85

Colors Available:
- Height: 0.48 in.
- Diameter: 0.51 in.
- Fits ¼" shaft with set screws
A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted
$2.65

Dial plates with 0-100 indicator marks. These plates are a simple way to add panel graphics to controls. They are easy to install beneath the nut of a potentiometer like a washer. The silk screened graphics on the brushed metal plate gives projects a clean and professional appearance. 40mm Dial Plate
60mm Dial Plate
- 40 mm (1.575”) outer diameter
- 9.95 mm (0.392”) inner diameter
- Best for 25.4mm (1”) or smaller knobs
60mm Dial Plate
- 60mm (2.362”) outer diameter
- 9.95mm (0.392”) inner diameter
- Best for 40.6 mm (1.59”) or smaller knobs
$1.70

High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
Davies 1913 (Large)
- Height: 0.50 in.
- Diameter: 0.75 in.
- Fits ¼" shaft with set screw
Davies 1913 (Large)
- Height: 0.625 in.
- Diameter: 1.13 in.
- Fits ¼" shaft with set screw
$2.75

Small black plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top and a stylish vertical knurl. The style is a close match to the Boss middle knobs used on many pedals. Fits ¼” (6.35mm) pot shafts.
$1.80

Colors Available:
$2.25

Colors Available:
$0.98

Colors Available:
$1.85

Colors Available:
- Height: 0.66 in.
- Diameter: 0.90 in
- Fits ¼" shaft with set screw
A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted
$3.95

Colors Available:
- Height: 0.75 in.
- Length: 1.065 in.
- Fits ¼" shaft with set screw
$0.99

Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.
$0.95

Colors Available:
$0.55

Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.
$7.65

Colors Available:
- Height: 0.43 in.
- Length: 0.825 in.
- Fits ¼" shaft with set screw
$0.69

High quality chicken head knobs with vintage gaunt design. The gaunt chicken head has a thinner band that extends above the base allowing for easy manipulation of the knob. This knob has a thick infilled indicator line and is made of solid phenolic. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
- Height: 0.67 in.
- Length: 1.26 in.
- Fits ¼" shaft with set screw
$1.20

Colors Available:
- Height: 0.56 in.
- Diameter: 0.496 in.
- Fits ¼" shaft with set screw
$3.50

High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
- Height: 0.71 in.
- Diameter:0.57 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
$1.65

Colors Available:
- Height: 0.71 in.
- Diameter: 0.57 in.
- Fits 6mm D Shafts
- No indicator
A variety of different sizes are available from the PT Series.
$1.65