Knobs

• Fits ¼" Solid Shafts (Set Screw)
• Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
• Brass Set Screw and Insert
• High Quality Plastic

High quality black plastic chickenhead knob. 1-1/4" in length. Push-on for split knurled shaft.

This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.

High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.

• Height: 0.50 in.
• Length: 1.13 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. The small 1400 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals and audio equipment such as the Pultec EQP-1A.

• Height: 0.38 in.
• Length: 0.84 in.
• Fits ¼" shaft with set screw

Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.

Set screw with brass insert, ¼" shaft. Measures 1.28" diameter x .71" tall.

High quality chicken head knobs with vintage gaunt design. The gaunt chicken head has a thinner band that extends above the base allowing for easy manipulation of the knob. This knob has a thick infilled indicator line and is made of solid phenolic. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.67 in.
• Length: 1.26 in.
• Fits ¼" shaft with set screw

Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.

High-quality USA made knobs from Davies Molding. This vintage-style 2310 pointer knob is made of solid phenolic and features a unique triangular shape. This classic design has fine vertical ridges on the sides providing grip when in use. The 2310 can be found on vintage equipment as well as boutique tube amplifiers from brands like Budda.

• Height: 0.50 in.
• Length: 1.19 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Davies Molding. This vintage-style 2150 pointer knob is made of solid phenolic and features an infilled indicator line. The detailed design has a mixture of ridges, curves and lines giving it a distinctively vintage appearance. The 2150 can be found on vintage equipment such as the Echoplex tape delay and test equipment from RCA and National Radio Company.

• Height: 0.56 in.
• Length: 1.25 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.71 in.
• Diameter:0.57 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.

Black pointer with white line. Fits a 3/16" knurled shafts. Push on Peavey part: 70902145

High-quality USA made knobs from Davies Molding. The large skirted 1919 pointer knob is made of solid phenolic and features an infilled indicator line. The pointer has an overall length of 1.25” and the skirt’s diameter is 1.13”. This knob shares design elements of the Davies 19xx knobs allowing for a uniform look while using a variety of knob shapes and styles.

• Height: 0.625 in
• Length: 1.25 in.
• Fits ¼" shaft with set screw

This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs feature a slotted set screw, and fit ¼" solid shaft potentiometers. These are a close match to the Davies 1400.

• Height: 0.43 in.
• Length: 0.825 in.
• Fits ¼" shaft with set screw

High quality chicken head knobs that resemble the style of knob found on the Zonk Machine II and Shatterbox fuzz pedals. The Zonk chicken head knob has a contoured center band with a textured finish. The outer dome has a shiny finish offering a visual contrast. Fits 0.25” (6.35mm) shafts with set screw and brass insert.

• Height: 0.75 in.
• Length: 1.065 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Rogan Corp. These solid phenolic knobs feature a brushed metal inlay in their unique diamond shaped grip. Often referred to as TV or cooker knobs, these genuine Rogans are used in a variety of Rickenbacker guitars and basses. In addition to the diamond shaped grip, they feature a large skirt and a small notched indicator. Fits ¼" shaft potentiometers.

• Height: 0.635 in.
• Length: 1.497 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.68 in.
• Diameter: 0.50 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.

High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.55 in.
• Diameter: 0.45 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.

High-quality USA made knobs from Davies Molding. The 8000 series knobs are made of solid phenolic and feature a classic teardrop design. The detailed design makes these knobs a striking addition to any piece of equipment. This unique design has been used on a variety of tools and instruments. Davies 8005 (Small)

• Height: 0.78 in.
• Length: 1.05 in.
• Fits ¼" shaft with set screw

Davies 8010 (Large)

• Height: 1 in.
• Length: 1.25 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.

• Height: 0.71 in.
• Diameter: 0.57 in.
• Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer

Original Fender chicken head knob. Black, comes in a package of six. Set screw. For 1/4" solid shaft pots.

High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.84 in.
• Diameter: 0.62 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.

High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.

• Height: 0.84 in.
• Diameter: 0.62 in.
• Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer