Kits & Effect Pedals

Are you a DIY'er and enjoy building your own gear? Our kits range from beginner to advanced skills, so there is something for everyone!
K-MOD102 Amp Kit - Mod® Electronics, MOD102 guitar amplifier
The Mod® Electronics MOD 102 is a great place to start for those interested in building their own tube amp. It is based on a classic American tube-circuit design combined with a British style Class A output tube section. At low volume it produces a clean chimey tone that moves into smooth overdrive at higher volumes. All parts are included along with a pre-drilled steel chassis, wire and tubes (1 EL84 and 1 12AX7). Puts out at least 5 watts. The chassis layout is open for easy assembly using the clear, easy to follow instructions.
$229.95
K-MOD102-PLUS Amp Kit - Mod® Electronics, MOD102+ guitar amp
The Mod® Electronics MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with added additional “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.
$275.00
K-MOD103 Effects Kit - Mod® Electronics, The Wave, Spring Reverb
The Mod® Electronics Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The Dwell control adjusts the input signal level driving the tank and the Reverb control adjusts the level of output reverberations from the tank. The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).
$295.00
M-AD9PRO Effects Pedal - Maxon, AD9Pro, Analog Delay
The Maxon AD9Pro is a high quality analog delay with up to 450ms of delay time using Maxon’s MC4107D BBD chip. With two delay modes and a wide range of control, the AD9Pro offers transparent analog delays that fit any genre. Features
  • Switchable Single Head/Dual Head modes. In Dual Head mode, the midstream delay signal is mixed back into the delay.
$265.95
M-CP101 Effects Pedal - Maxon, CP101, Compressor
The Maxon CP101 is a classic compressor pedal that offers up to 42dB of natural sounding compression for a controlled sound with plenty of sustain. The CP101 is designed to preserve the sound of the guitar with its transparent attack and clean tone. Features
  • Clean and natural compression with little change to the original tone
  • Limiter-like effects for consistent levels.
  • Transparent pick attack and relaxed sustain for lead guitar
  • Great for bass guitars and semi-acoustic guitars
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$139.95
M-DAS Effects Pedal - Maxon, D&S, Distortion & Sustainer
The D&S is a classic Maxon distortion pedal. Heavily inspired by the Big Muff Pi, the D&S takes the famous transistor based circuit and refines it into a versatile effect with an improved EQ and an expanded range of distortion. Features
  • Amazingly long sustain and rich distortion
  • A wide variety of distortion ranging from overdrive to thick and heavy distortion and into over the top vintage fuzz tones.
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$139.95
M-OD808 Effects Pedal - Maxon, OD808, Overdrive
The Maxon OD808 is an identical circuit to the original TS808 Tubescreamer Maxon designed and built in the late 1970s. Featuring a JRC4558, the OD808 offers the same natural overdriven tones as the original pedals used widely across all genres of music. The OD808 has a warmer and smoother tone than the OD-9 that pairs nicely with clean amps in addition to sounding great in just about any rig.
Features
  • Natural and smooth overdrive effects with tube-like saturation
  • Preserves the original tone of the instrument
  • Produces a variety of sound ranging from a clean boost to fully saturated overdrive
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$129.95
M-OD808X Effects Pedal - Maxon, OD808X, Overdrive Extreme
The OD808X is the perfect pedal for those wishing their OD808 went to 11. The OD808X offers more of everything with its extended drive, frequency response, and overall levels providing an articulate overdrive that can cut through any mix. Features
  • Based on the classic natural drive sound of Maxon’s OD808 circuit.
  • Offers an extended frequency range and response compared to the OD808. The additional range has been carefully tuned to provide clarity and accentuate the high-gain settings.
  • OD808X offers more gain and harder clipping than the standard OD808, creating tube-like distortion with excellent note definition and clarity.
  • OD808X features a buffered JFET bypass switching with a low impedance output, allowing it to drive long cables or other effect units without loss of signal.
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$139.95
M-OD9 Effects Pedal - Maxon, OD9, Overdrive
The Maxon OD-9 is the original Tube Screamer TS9 circuit built by the company that designed this immensely popular overdrive pedal. They left no boxes unchecked by including a genuine JRC4558 and the only departure from the original is the inclusion of true bypass switching, a modern necessity. The OD-9 offers slightly more gain than the OD808.
Features
  • Identical to the original circuit and featuring the JRC4558 IC chip
  • Natural tube-like overdrive that smoothly responds to dynamic signals
  • True Bypass Switching
  • Low noise mechanical switch
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$139.95
M-OD9PROP Effects Pedal - Maxon, OD9Pro+, Overdrive Pro Plus
The OD9Pro+ is the OD9 with all of the bells and whistles. This pedal features the famous circuit with some of the most popular mods built in and accessible with the flip of a switch. The OD9Pro+ offers the classic overdrive sound of the original and can push even further with the boost switch engaged.
$199.95
M-PAC9 Effects Pedal - Maxon, PAC9, Pure Analog Chorus
The PAC9 is a classic analog chorus featuring swirling warm chorus sounds and stereo output for a wide chorus spread. In addition to the standard Speed and Width controls, the PAC9 offers a Bright switch for a focused sound and a Pure switch that boosts the signal. Features
  • Clean analog chorus sound using the Maxon MC4107D BBD chip
  • Speed and Width controls
  • Bright and Pure switches offer a variety of sounds for bold and deep chorus effects
  • Widely adjustable Speed range of 0.33Hz - 8Hz.
$218.95
M-SD9 Effects Pedal - Maxon, SD9, Sonic Overdrive
The SD9 Sonic Overdrive offers saturated distortion perfect for screaming leads and thick rhythms. The SD9 was designed in the same era as the OD9 and this pedal can go toe-to-toe with its overdrive counterpart. Providing smooth distortion, long sustain, and clear articulation, the SD9 can fill a room with classic distortion sounds. Features
  • Bright distortion with articulate pick attack over the entire frequency range.
  • Sweet harmonics and accentuated high-end tones
  • True Bypass Switching
  • Low noise mechanical switch
  • LED indicator for effect on/off
  • DC power or 9V battery
  • Made in Japan
$145.95
M-SM9PROP Effects Pedal - Maxon, SM9Pro+, Super Metal Pro Plus
The SM9Pro is an upgraded version of the classic SM9 from Maxon. The original core of the circuit was kept intact and bolstered to meet the needs of heavy metal guitarists. A refined EQ control featuring an adjustable mid scoop allows users to dial in the perfect balance for their sound. The gain control provides sounds that range from classic heavy metal to the devastating tones of modern metal.
$185.95
M-RAT2 Effects Pedal - ProCo, Rat-2, Distortion
The RAT2 is the classic distortion pedal in the Pro Co RAT family. It has a unique tone structure that other effect devices are measured against. The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads.
$82.95
P-BHFSM Field Strength Meter Kit - Ham Nation, Bob Heil
Kit components for the Ham Nation Field Strength Meter project. From HAMNation episode 289.
$7.10
On Backorder
K-GMOD-4 Guitar Wiring Upgrade Kit - Mod® Electronics, 3 Position PRS Style
The K-GMOD-4 is a vintage style wiring kit for PRS guitars. Use this kit to upgrade your current PRS electronics to high quality parts. This kit also includes a treble bleed mod for the volume pot to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
$35.26
K-GMOD-1 Guitar Wiring Upgrade Kit - Mod® Electronics, 3 Position Telecaster
The K-GMOD-1 is a vintage style wiring kit for Telecaster guitars. Use this kit to upgrade your current Tele electronics to high quality parts. This kit also includes a treble bleed mod for the volume pot to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
$26.56
K-GMOD-2 Guitar Wiring Upgrade Kit - Mod® Electronics, 5 Position Stratocaster
The K-GMOD-2 is a vintage style wiring kit for Stratocaster guitars. Use this kit to upgrade your current Strat electronics to high quality parts. This kit also includes a treble bleed mod for the volume pot to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
$32.91
K-GMOD-6 Guitar Wiring Upgrade Kit - Mod® Electronics, ES-335 Standard
The K-GMOD-6 is a vintage style wiring kit for ES-335 guitars. Use this kit to upgrade your current ES-335 electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
$51.22
K-GMOD-5 Guitar Wiring Upgrade Kit - Mod® Electronics, Les Paul Toggle Switch and Jack
The K-GMOD-5 is a vintage style wiring kit for Les Paul toggle switches and output jacks. Use this kit to upgrade your current Les Paul switch and jack to high quality parts.
$23.95
On Backorder
K-GMOD-3L Guitar Wiring Upgrade Kit - Mod® Electronics, Long Bushing Potentiometer Les Paul
The K-GMOD-3L is a vintage style wiring kit for Les Paul guitars. This version comes with long bushing pots for carved top Les Paul’s. Use this kit to upgrade your current Les Paul electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
$28.42
K-GMOD-7 Guitar Wiring Upgrade Kit - Mod® Electronics, SG Standard
The K-GMOD-7 is a vintage style wiring kit for SG guitars. Use this kit to upgrade your current SG electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
$48.72
K-GMOD-3S Guitar Wiring Upgrade Kit - Mod® Electronics, Short Bushing Potentiometer Les Paul
The K-GMOD-3S is a vintage style wiring kit for Les Paul guitars. This version comes with short bushing pots for flat top Les Paul’s. Use this kit to upgrade your current Les Paul electronics to high quality parts. This kit also includes a treble bleed mod for the volume pots to enhance clarity with lower settings and comes with detailed instructions and all the parts you need to make your modification.
$26.62
K-JRG01-KIT Kit - BusBoard, Junior Genius Blinky Lights Kit
Junior Genius Kits are built for experimentation, learning and fun! Experience the joy of seeing your first LED light up. The Blinky Lights Kit leads you through 10 core activities, from a simple LED circuit up to more advanced transistor LED blinky light circuits, using standard parts on a real-world breadboard. Learn about voltage and current by using LEDs, resistors, capacitors and transistors. You'll be able to build circuits using a schematic diagram, and there's plenty of help to get you there. Simple examples make it easy to grasp the basics and 'What's Happening' and 'Things To Try' sections encourage you to dig deeper. You will get valuable assembly and troubleshooting experience as you learn to use a great experimentation tool, the solderless breadboard. Real hands-on experience means greater educational value. This next-generation science kit doesn’t seal the parts into simplified plastic blocks.
$27.95
Don't see what you're looking for? Send us your product suggestions!