You are here

Kits

Are you a DIY'er and enjoy building your own gear? Our kits range from beginner to advanced skills, so there is something for everyone!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(4 pages)
K-703Amp Mod Kit - MOD® Kits, Normal to Bass Conversion

This kit was designed for those who play both guitar and bass. Turn the Normal Channel in your silver-face or black-face Fender amp into the Bass Instrument channel. The kit comes with parts and easy to follow instructions. You will need your own tools and solder.


$16.95
$15.26
You save: 10%
Click to read more
K-977Effects Pedal Kit - MOD® Kits, Suspended Chime, Chorus, Delay

The Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up. Using the selector switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound. The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.


$99.95
$89.96
You save: 10%
Click to read more
K-AMP-1Hybrid Tube Amp - desk-sized tube amplifier
Clear sound of solid-state amp and soothing warm sound of tube amp - this company cubic amp enjoys the good aspects of those two different types of amplifiers. Deck your desk with this sophisticated amp and its pleasant sound.Features

  • Hybrid of vacuum tube input buffer + D-class speaker amp (AB-class headphone amp built-in)
  • DC-controlled electronic volume built-in the amplifier IC. Therefore the volume deflection between right and left channels at small sound volume is minimized.
  • Headphone output
  • Built-in USB-DAC for PC connection
  • Interlocking the amp power ON/OFF with the PC USB power selectable
  • Assembly kit for users to experience the fun of DIY (A PCB is preassembled, no soldering is required. For assembly, users will need a long-nose pliers and a screwdriver only. (A hex wrench is included.))
$285.00
$256.50
You save: 10%
Click to read more
P-BHFSMField Strength Meter Kit - Ham Nation, Bob Heil

Kit includes:



  • 1x P-0501H (pack of 5)
  • 1x P-Q971
  • 1x R-VA50KL
  • 1x C-PEID01-100 (pack of 5)

$7.10
$6.39
You save: 10%
Click to read more
P-BHPSPower Supply Kit - Ham Nation, Bob Heil

Kit includes:



  • 1x P-T261G6
  • 3x C-ET22-450
  • 1x R-F1K (pack of 5)
  • 1x S-H205
  • 1x F-ZF010 (pack of 5)
  • 1x P-H540
  • 1x T-6X5GT_EZ35
  • 1x P-ST8-800
  • 1x P-0602H (pack of 5)
  • 1x P-L124-P
  • 1x P-47 (box of 10)
  • 1x P-L115
  • 1x S-W125

$89.13
$80.22
You save: 10%
Click to read more
P-BH-MPMic Preamp Kit - Ham Nation, Bob Heil
Kit includes:

  • 1x P-ST9-511
  • 1x package of P-0602H
  • 1x C-ET10-450
  • 1x C-SA10-25
  • 2x C-D1000-2000
  • 1x C-D10000-100
  • 1x C-D22000-100
  • 1x C-D50000-100
  • 2x C-PEID1-100
  • 1x package of R-B1K
  • 1x package of R-B33K
  • 1x package of R-B100K
  • 1x package of R-B1M
  • 2x R-VA50KL
  • 1x R-VA10KL
  • 1x P-K302R
  • 2x P-K302P
  • 2x S-H522


Power supply kit sold as P-BHPS.

Vacuum tubes sold separately.
$32.10
$28.89
You save: 10%
Click to read more
P-BH-PBAMTPine Board AM Transmitter Kit - Ham Nation, Bob Heil
Kit includes:

  • 2x P-ST8-250MT
  • 1x package of S-H170
  • 1x package of P-0702H
  • 1x C-ET10-450
  • 1x C-ET47-50
  • 1x C-SM500
  • 1x C-SM100
  • 1x C-D1000-2000
  • 1x C-V365
  • 1x package of R-I100
  • 1x package of R-I22K
  • 1x package of R-I56K
  • 1x package of R-I100K
  • 1x P-CF22707


Power supply kit sold as P-BHPS.

Vacuum tubes sold separately.
$51.77
$46.59
You save: 10%
Click to read more
K-996Effects Pedal Kit - MOD® Kits, The Penetrator, Treble Boost

The Penetrator is a treble boost pedal kit with enough gain to cut straight through any mix. This pedal adds glistening harmonics that get loud enough to saturate your amp’s front end. Adjust the level knob to vary the output so there’s no mistaking when you kick this pedal in. Great for solos or when you need your guitar front and center.


$38.95
$35.06
You save: 10%
Click to read more
K-997Effects Pedal Kit - MOD® Kits, Erratic Clutch Deluxe, Fuzz/Divider

The Erratic Clutch Deluxe is a unique effect pedal kit that gives you fuzzy square wave distortion as well as a monophonic sub-octave square wave using a total of only four transistors. The two signals can be used individually or mixed together for a raw and sonically rich synthy output. Full of character and quirk, this pedal will give you a truly original sound. The middle knob is the bias control. This adjusts the pulse width in the initial fuzz stage of the pedal. Set this knob to fit your pickups and playing style. The closer to the center the longer the note will sustain but with that comes more chaotic tracking for the divider. Moving it more clockwise or counterclockwise will give you more predictable note tracking on the divider with less sustain.


$69.95
$62.96
You save: 10%
Click to read more
K-998Effects Pedal Kit - MOD® Kits, Tone Attack, Active Tone Stack

Shape your sound with the Tone Attack. 12 o'clock settings give an approximate unity gain with the pedal. Rotate the treble or bass knob counterclockwise to cut the corresponding frequencies. Rotate these same knobs clockwise to boost the frequency bands. The master boost knob can be used to attenuate your signal or push your tone to screaming loud volumes. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. The Tone Attack operates on a 9V battery or AC adapter, which is not included. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.


$64.95
$58.46
You save: 10%
Click to read more

Pages

(4 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Kits