Jacks & Plugs

High quality vintage-design ¼” plug from Switchcraft. This TS (mono) plug features an all metal handle (for .29 to .30 inch cable diameter), cable clamp and a heavy copper alloy-plated flex relief spring (for .265 inch cable diameter maximum).
$11.95

Panel mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.
- M9*0.75 Bushing Thread
- Stereo 3-Conductor (TRS)
- Open Circuit (does not have switched terminal).
- Includes nut and washer.
$0.99

Black PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These jacks feature black hardware with a matching black nut. They also use a square bushing plate for added durability. Mounting nut is included.

PCB Mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.
- M9*0.75 Bushing Thread
- Stereo 3-Conductor (TRS)
- Open Circuit (does not have switched terminal).
- Includes nut and washer.

Switchcraft Type 12B Littel-Jax stereo phone jack. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Stereo 3-Conductor double open circuit (does not have switched terminal). Includes nut and washer.
$2.69

2 pole chassis connector, black D-size flange, countersunk thruholes, 3/16" flat tabs. Does not intermate with the 4-pole cable connector. Mates with W-SO-P22 The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate. Features
- Current rating 30 A rms
- Glass reinforced materials make it extremely robust and dependable
- Precise keyway for secure mating
- Accurate twist lock latching system
- Metal insert in locking area
- Airtight design - optimized for speaker applications
$3.65

2 tip HID (High Definition), non-insulated, metal bushing. Please note that this does not include nuts or washers. Please see parts S-HRVNT S-HRVLW, and R-VNUT-38 if you require them.
$4.25

Colors Available:
- Capable of being screwed directly onto switchcraft jacks
$4.55

Colors Available:
- The “D” size housing can be either front or rear mounted using the same panel cutout
- A leading first mate last break socket contact is standard on all female connectors (Pin 1)
- Solder cup
- Connectors are fitted with a grounding system for RFI shielding applications
- Compatible with all other XLR brands
Note: A ground tag is standard on all AC "Z" series connectors.
Starting at $3.65

Colors Available:
- The housing can be either front or rear mounted using the same panel cutout
- Machined connectors
- Solder cup
- Connectors are fitted with a grounding lug
- Compatible with all other XLR brands
Starting at $2.65

Colors Available:
$1.64

1/4" Stereo Phone plug, Diecast Shell, Satin finish, Flexible grommet. Features:
- Stylised Shell design
- Robust diecast shell
- Great solderability with increased solder area
- Precision machined contacts
- Flexible grommet cable protection
- Quick and easy assembly
$5.75

PCB mounted 3.5mm stereo jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.

XLR 3 pole male, stamped contacts, nickel finish, jaws cable clamp. Features:
- Zinc Diecast Shell
- Solder Bucket connections
- "Jaws" Cable Retention System
- Leading first mate last break socket contact
- Quick and easy assembly without screws
- Precision machined contacts
$3.65

Original Fender® 3.5mm (1/8”) stereo phone jack . PC mount jack used as Auxiliary and headphone out for Mustang series amps.
$3.89

1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.
$6.35

2 pole cable connector, chuck type strain relief. Mates with W-SO-J21 The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination. Features:
- Current rating 40 A continuous, 50 A audio signal with 50% duty cycle
- Only 3 parts, easy to assemble
- High impact materials – long-lasting and reliable
- Easy and extremely precise locking system "Quick Lock"
- 1 piece strain relief, chuck for 6 to 10 mm cable O.D.
- Improved grip on latch
- Mates with 4-pole chassis connector W-SO-J41 as well and makes contact with +1/-1
$5.95

Stereo, insulated, plastic bushing, bushing length = 0.29". Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
$4.55

Generic, 2 hole jack plate with a smooth black finish or with a zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:
- Horizontal- 3-9/16”
- Vertical- 2-15/16”
$4.25

Low profile mono jacks made by Lumberg. These high quality jacks are the perfect size for tightly packed pedal enclosures. The premium look, feel, and construction make Lumberg jacks an excellent choice for any build.
- M9*0.75 Bushing Thread
- Mono 2-Conductor
- Open Circuit (does not have switched terminal).
- Includes nut and washer.
$1.65

The Switchcraft Type 112BX enclosed ¼” jack is a high quality jack. This jack has three solder lugs. One for the tip, one for the ring, and one for the sleeve. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer.
See W-SC-111X for mono version
- Type 112BX
- 0.276" bushing length (standard)
- Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
- Stereo 3-Conductor
- Includes nut and washer
See W-SC-111X for mono version
$3.15

Colors Available:
$2.85

R/A stereo jack. Replacement for Fender amps 1999-present. Similar to Fender part: 005-3450-000
$1.99

Knurled, slotted nut for W-QP-419GR and W-QP-518MA 3.5mm jacks. See W-QP-NUT-H for the hex version of this nut. See W-QP-WASHER for compatible washer See S-TND-2X for nut driver tool