Jacks & Plugs

XLR 3 pole female, stamped contacts, large jaws cable clamp.

Genuine Switchcraft Type 11 ¼” jack with complete gold plating. All metal parts are gold plated including the washer and nut.

Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.

Cliff S4 PC-A (L Leg). Stereo input jack, metal nut, 6 pin pc mount. Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability Tough, molded grade 1 black Nylon body. Supplied with a black nylon hexagonal mounting nut. Designed to receive both mono and stereo ¼" jack plugs.

Pure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

High quality 3.5mm plug. Features nickel plated brass contacts, with a nickel plated zinc shell. This plug uses a crimp strain relief for use with 4 mm O.D cables.

2-pole 1/4" professional straight phone plug, gold contacts, black shell.
Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.

2-pole 1/4" professional right-angle phone plug, gold contacts, black shell.
Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.

1/4" Mono Phone plug, Right angle, Diecast Shell, Satin finish, Flexible grommet. Features:

• Stylised Shell design
• Robust diecast shell
• Great solderability with increased solder area
• Precision machined contacts
• Flexible grommet cable protection
• Quick and easy assembly
• Large cable O.D. Entry to 8mm (0.315”)

1/4" Mono phone plug, diecast shell, satin finish, flexible grommet. Features:

• Stylised Shell design
• Robust diecast shell
• Great solderability with increased solder area
• Precision machined contacts
• Flexible grommet cable protection
• Quick and easy assembly
• Large cable O.D. Entry to 8mm (0.315”)

• Withstand voltage: 2000V DC Minimum
• Maximum current: 5A
• Temperature rating: -10°C - 70°C
• Life (minimum): 10,000+ operations
• Nominal contact resistance:

M12 x1.0 thread. Package of 5.

Nickle plated brass contact pin. This pin is .156" in diameter and fits .062" and .093" boards. Height is .566" when mounted.

Genuine Cliff™ replacement combination nut/bezel for S4 Series jacks.

• 3/8” thread diameter/20 TPI
• 3/16” thread length
• 7/16” nut
• Used on many Marshall amps
• Matte black finish
• Sold individually.

The Amphenol T series SwitchPlug uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals. The sliding ring contact self-cleans every time the plug is connected preventing excessive build up of oxidization and contamination. Activation is directly off the jacks full front face assuring a positive reference point every time, and as it works instantaneously on the main circuits there is no need for the use of magnets or other elaborate switching mechanisms. Thermoplastic Backshell. Straight, black finish. Large cable clamp.

Ferrule for internal thread jacks, chrome (3/8-20).

Fender style 1/4" straight mono (tip-sleeve) open plug. Use with F-cap cover (P-H55F). Perfect for use as "open" plug for Fender "Hot Rod" and "Blues Reissue" amps having both "Main Speaker" and "External Speaker" jacks allowing you to connect an alternate speaker impedance with the open plug inserted in the "Main Speaker" jack (speaker load configuration 3).

Original Cliff UK right angle black 1/4" mono plug. This Cliff jack plug is designed for use in many applications including audio, computer, military and industrial uses. The tip, ring, sleeve (TRS) connectors are manufactured from solid nickel plated brass with high temperature phenolic / PBT insulators. Features a cable clamp, which is an integral part of the ground screen contact and clamps firmly without damaging the cable.

Original Cliff UK right angle 1/4" mono plug. High quality with plastic screw on cover having a 0.31" diameter hole for inserting cable and snap-on back plastic cover allowing ease of access to tip solder lug. This Cliff jack plug is designed for use in many applications including audio, computer, military and industrial uses. The tip, ring, sleeve (TRS) connectors are manufactured from solid nickel plated brass with high temperature phenolic / PBT insulators. Features a cable clamp, which is an integral part of the ground screen contact and clamps firmly without damaging the cable.

Original Cliff sealed and switched blue jack. Fully threaded. Many types of professional music equipment nowadays use high power components, and need to be cooled by fans. Fans draw in dust and pollutants which can adversely affect the contacts of conventional jacks, with exposed contacts. This sealed jack avoids possibility of contamination of contacts by means of a sealing cover over the top and bottom of the jack.

Replacement seal for S-H910 and S-H911 Cliff UK jacks.

Original Cliff UK right angle 1/4" stereo plug. High quality with plastic screw on cover having a 0.31" diameter hole for inserting cable and snap-on back plastic cover allowing ease of access to tip and ring solder lugs.

Generic, 2 hole jack plate with smooth black finish, textured black finish, or zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Multiple color options available.
Center-To-Center mounting hole measurements are as follows:

• Horizontal- 3-9/16”
• Vertical- 3-3/16”