Jacks & Plugs
SwitchcraftSwitchcraft is a leading supplier of a broad line of jacks and plugs for audio applications.
RCA Plug - Switchcraft, straight, 2-conductor, type 3501MX
Switchcraft 2 conductor RCA straight plug, accomodates cable up to 0.125" (3.18mm) diameter, no handle. Switchcraft’s® straight RCA plugs feature an easy-to-assemble construction: a handle and plug assembly. The plug features a solid-pin design and large solder terminals that make termination faster and easier. This new RCA plug will save time and space in any application.
¼" Jack - Switchcraft, Mono, open circuit
Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.
Starting at $1.95
¼" Jack - Switchcraft, Mono, shunt tip
Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer
Starting at $2.35
¼" Jack - Switchcraft, Enclosed, Mono, Shunt Tip
The Switchcraft Type 112A enclosed ¼” jack is a high quality jack featuring a switched tip. This jack has three solder lugs. One for the tip, one for the sleeve, and one for the switch which connects to the tip when no plug is inserted. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer
- Type 112AX
- 0.276" bushing length (standard)
- Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
- Mono 2-Conductor
- Includes nut and washer
- Tip is shunt
RCA Jack - Switchcraft, Rear panel-mount, natural-insulator
Switchcraft RCA/phono rear panel-mount jack. Natural insulator. Good replacement for Fender. Mounts in a 3/8" hole.
¼" Jack - Switchcraft, Stereo, double open circuit
Switchcraft Type 12B Littel-Jax stereo phone jack. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Stereo 3-Conductor double open circuit (does not have switched terminal). Includes nut and washer.
RCA Plug - Switchcraft, straight, 2-conductor, long handle
Switchcraft 2 conductor shielded RCA straight plug, solid pin, accommodates cable up to 0.290" (7.366mm) diameter, solder cup on center. Long handle & cable clamp, Nickel Handle, Nickel Plug
¼" Plug - Switchcraft, cable-mount
Switchcraft Type 280. ¼” straight plug with solder lugs and cable clamp. Switchcraft Heavy duty machined copper alloy handle, tip and body for unsurpassed ruggedness
Starting at $3.15
HPC Loudspeaker - Switchcraft, panel mount, 2-pole
HPC Loudspeaker, panel-mount connector, 0.1" recessed flange, 0.140" dia. hole, Faston 0.250" termination. Mates with W-SC-HPCC4F
Starting at $3.95
XLR Jack - Switchcraft, premium, rectangular panel-mount
Receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter. Standard latchlock;
Starting at $4.25
XLR Plug - Switchcraft, premium, cable-mount
Switchcraft XLR 3-Pin Cable Mount Plug (Type A3F) Nickel body. Silver contacts. Latchlock. The original A Series premium XLR connector with adjustable dual pressure plate cable clamp, flexible strain relief, and removable pin insert. Cable-mount with silver pins. Nickel. Provides secure cable lock and strain relief for all standard size cables. Specifications Construction Sturdy, die-cast zinc with satin nickel finish to withstand hard use - even abuse. Insert Insulation High-impact, molded thermoplastic provides high dielectric strength, and superior insulation resistance. Locking Latchlock on female plugs and receptacles locks into groove in mating male connector to prevent accidental disconnect.
Starting at $4.45
¼" Plug - Switchcraft, flat cable-mount, right-angle
Switchcraft ¼" Mono 2-conductor cable-mount plug. Flat shielded handle with solder terminals. Type 228. Used in Fender amps for speaker connections. Also perfect for close quarters pedal-to-pedal connections. Includes hardware
Starting at $4.95
¼" Jack - Switchcraft, Stereo, shunt tip
Switchcraft 1/4" stereo jack, 4 solder lugs include: tip, tip-shunt, ring and sleeve.
¼" Plug - Switchcraft, cable-mount, right-angle
Switchcraft ¼" Right Angle Plug (Type 226) Good for tight spaces Large terminals accept up to 16 AWG wiring (cables up to 0.25" diameter) All Metal exterior
Starting at $5.35
¼" Jack - Switchcraft, Mono, transfer circuit
1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.
¼" Jack - Switchcraft, Mono, isolated make circuit
Switchcraft ¼" Mono 2-Conductor Input Jack, Isolated Make Circuit (Type 13). Includes nut and washer
¼" Jack - Switchcraft, Mono, isolated break circuit
Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.
¼" Plug - Switchcraft, Mono, 2-conductor, heavy-duty jumbo
Switchcraft Type 188 Jumbo Plug. ¼" Mono 2 Conductor Heavy Duty Cable Mount Plug - Nickel Finish.
¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
XLR Jack - Switchcraft, premium, circular panel-mount
C Series Circular Panel Mount 3 Pin XLR Female, mounts with #5 Screws (Not included) - Silver Pins / Nickel Finish.
Starting at $8.75
¼" Jack - Switchcraft, Mono, Open Circuit, Gold Plated
Genuine Switchcraft Type 11 ¼” jack with complete gold plating. All metal parts are gold plated including the washer and nut.
¼" Jack - Switchcraft, Acoustic End Pin, Mono / Stereo, Nickel
High quality acoustic end pin style jacks from Switchcraft. These nickel plated jacks have three conductors, a strain relief clamp, and a threaded shroud for a professional looking wiring job. The special strap nut can be removed to reveal a hex nut that can be used for external tightening of the jack.