Jacks & Plugs

S-H801 Jack Plate - Marshall, Mono or Stereo
Mono or stereo jack plate for back of cabinets.
$53.80
S-H800 Jack Plate - Marshall, Switchable Stereo / Mono
Switchable stereo/mono jack plate for back of cabinets.
$48.60
S-H700 Jack Plate - Plug and Play, Mono / Stereo
The Plug and Play eliminates the confusing switch found on most stereo cabinets. Just pick your impedance and plug in. Label is set at the common 4/16 Ohm Mono and 8 Ohm Stereo. Ready to install with a steel dish, wires, and speaker connectors.
$15.95
On Backorder
P-H166 Jack Plate - Electrosocket, for Tele, Anodized Aluminum
This modern cupstyle Tele® jackplate is milled from brass and has an shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$10.75
W-AM-AC3M3MW XLR Adapter - Amphenol, Male To Male, Nickel
XLR 3 pole male to 3 pole male adapter, pre-wired, metal shell. Nickel. Features:
  • Adapter pre-wired for convenience
  • 120 ohm terminators
$10.00
S-H652N ¼" Jack - Pure Tone, Stereo, Double-Open Circuit, Long Thread
Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.
$9.99
W-AM-TM1RBJ ¼" Plug - Amphenol, Mono, Right Angle, SwitchPlug™, Large
The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.
$9.95
W-SC-11G ¼" Jack - Switchcraft, Mono, Open Circuit, Gold Plated
Genuine Switchcraft Type 11 ¼” jack with complete gold plating. All metal parts are gold plated including the washer and nut.
$9.95
W-SC-152B ¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
$8.95
W-SC-C3X XLR Jack - Switchcraft, premium, circular panel-mount
C Series Circular Panel Mount 3 Pin XLR Female, mounts with #5 Screws (Not included) - Silver Pins / Nickel Finish.
Starting at $7.95
W-AM-TM1PBJ ¼" Plug - Amphenol, Mono, Straight, SwitchPlug™, Large
The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.
$7.95
Save 11%
Originally: $8.95
P-H55 ¼" Plug - Straight, Used with F-Cap on Fender amps
Fender style 1/4" straight mono (tip-sleeve) open plug. Use with F-cap cover (P-H55F). Perfect for use as "open" plug for Fender "Hot Rod" and "Blues Reissue" amps having both "Main Speaker" and "External Speaker" jacks allowing you to connect an alternate speaker impedance with the open plug inserted in the "Main Speaker" jack (speaker load configuration 3).
$7.35
P-H150 Jack Plate - Marshall, for Input Jack On Speaker Cabs, Plastic
Plastic jack cup for input jack on speaker cabinets.
  • Diameter = 3 3/4''
  • Center to Center Screw Hole Spacing Distance = 2 1/8''
$7.15
W-SC-188 ¼" Plug - Switchcraft, Mono, 2-conductor, heavy-duty jumbo
Switchcraft Type 188 Jumbo Plug. ¼" Mono 2 Conductor Heavy Duty Cable Mount Plug - Nickel Finish.
$6.95
W-SC-13E ¼" Jack - Switchcraft, Mono, isolated break circuit
Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.
$6.50
S-H507 ¼" Jack - Fender®, Stereo, PC Mount, for Amps '88-'99
Original replacement for Fender® amps. ¼" Stereo Input Jack that has 9 PCB mount terminals.
$6.25
W-AM-TM2RBJ-AU ¼" Plug - Amphenol, Right Angle, Mono, Gold Contacts
2-pole 1/4" professional right-angle phone plug, gold contacts, black shell.
Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.
$6.25
P-H70 ¼" Plug - G&H, Stereo, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. Unique design and molded construction eliminates the need for an additional insulator over the ground tab, making it much easier to solder.
$5.95
W-AM-TM2PNJ ¼" Plug - Amphenol, Mono, Nickel
Amphenol "T-Series (Pro Range)" Phone Plug. 1/4" Mono straight plug with large Jaws cable clamp, metal backshell and black finish. Internal cable clamp fits cable outer diameters ranging from 0.236” to 0.295” (6 mm to 7.5 mm).
$5.60
P-H55F F-Cap - Plastic Cap for Straight Plug P-H55
F-cap, black plastic. Similar to that used on old Fender ® amps.
$5.50
S-H512 ¼" Jack - Fender®, Mono, PC Mount, Closed Circuit
PCB mono closed circuit.
$5.50
W-AM-JM2P ¼" Plug - Amphenol, Mono, Jumbo, Thermoplastic, Satin
1/4" JUMBO mono plug, thermoplastic backshell, satin finish. Features:
  • Cable O.D. 7.5mm to 10.5mm (0.295" to 0.413")
  • Stylised Shell design with ergonomic grip
  • Robust diecast shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • Quick and easy assembly
  • Nickel contact-plating
$5.50
W-SO-P42-X Speaker Twist Plug - Neutrik, speakON, 4-Pole, Strain Relief
Colors Available:
4 pole cable connector, chuck type strain relief. Mates with W-SO-J41 The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination. Features:
  • Current rating 40 A continuous, 50 A audio signal with 50% duty cycle
  • Only 3 parts, easy to assemble
  • High impact materials – long-lasting and reliable
  • Easy and extremely precise locking system "Quick Lock"
  • 1 piece strain relief, chuck for 6 to 10 mm cable O.D.
  • Improved grip on latch
Starting at $5.50
P-H80 ¼" Plug - G&H, Mono, Jumbo, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in America. For large wire, 8-12 gauge speaker cable.
$5.25
Don't see what you're looking for? Send us your product suggestions!