Jacks & Plugs

S-H700 Jack Plate - Plug and Play, Mono / Stereo
The Plug and Play eliminates the confusing switch found on most stereo cabinets. Just pick your impedance and plug in. Label is set at the common 4/16 Ohm Mono and 8 Ohm Stereo. Ready to install with a steel dish, wires, and speaker connectors.
$15.95
W-SC-280-X Plug - Switchcraft, ¼", cable-mount
Switchcraft Type 280. ¼” straight plug with solder lugs and cable clamp. Switchcraft Heavy duty machined copper alloy handle, tip and body for unsurpassed ruggedness
Starting at $3.15
P-H180 Jack Plate - Single ¼", 2" Outside Diameter, Black Metal
  • Recessed steel cup
  • Designed for use with 1/4" jacks
  • Steel design
  • 3 mounting holes
$0.85
W-SC-228-X Plug - Switchcraft, ¼", flat cable-mount, right-angle
Switchcraft ¼" Mono 2-conductor cable-mount plug. Flat shielded handle with solder terminals. Type 228. Used in Fender amps for speaker connections. Also perfect for close quarters pedal-to-pedal connections. Includes hardware
Starting at $4.95
W-SC-226-X Plug - Switchcraft, ¼", cable-mount, right-angle
Switchcraft ¼" Right Angle Plug (Type 226) Good for tight spaces Large terminals accept up to 16 AWG wiring (cables up to 0.25" diameter) All Metal exterior
Starting at $5.25
P-H60 Plug - G&H, ¼", Mono, Right Angle, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2" profile.
$3.95
P-H150 Jack Cup - Marshall, for Input Jack On Speaker Cabs, Plastic
Plastic jack cup for input jack on speaker cabinets.
  • Diameter = 3 3/4''
  • Center to Center Screw Hole Spacing Distance = 2 1/8''
$7.15
S-H800 Jack Plate - Marshall, Switchable Stereo / Mono
Switchable stereo/mono jack plate for back of cabinets.
$48.60
W-AM-ACPM-GX Plug - Amphenol, ¼" Mono, Musician series
Colors Available:
1/4" Mono phone plug. Features a stylised shell design, robust diecast shell, great solderability, flexible grommet cable protection and quick and easy assembly
$3.75
W-AM-ACPM-RN Plug - Amphenol, ¼", Mono, Right Angle, Satin
1/4" Mono Phone plug, Right angle, Diecast Shell, Satin finish, Flexible grommet. Features:
  • Stylised Shell design
  • Robust diecast shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • Flexible grommet cable protection
  • Quick and easy assembly
$2.80
W-SC-D3X Jack - Switchcraft, premium XLR, 3-Pin, rectangular panel-mount
Receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter. Standard latchlock;
Starting at $3.50
P-H167-X Jack Mount - for Telecasters
Colors Available:
Avoid loose output jacks with this black jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.
  • Capable of being screwed directly onto switchcraft jacks
$5.00
P-H50 Plug - G&H, ¼", Mono, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2 inch body diameter for instrument and smaller wire speaker applications.
Features:
  • Shielded handle
  • Large cable clamp
  • Independent ground
  • Copper-core construction
$2.95
P-H191-B Jack Plate - 2-Hole, Metal, 3.5" x 5.13", Black
Generic, 2 hole jack plate with a smooth black finish or with a zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 2-15/16”
$3.25
P-H100X Jack Plate - Fits Les Paul, Plastic
Colors Available:
Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.
$1.95
P-H55F F-Cap - Plastic Cap for Straight Plug P-H55
F-cap, black plastic. Similar to that used on old Fender ® amps.
$5.50
W-SC-13B Jack - Switchcraft, ¼", Stereo 3-conductor, shunt tip
Switchcraft 1/4" stereo jack, 4 solder lugs include: tip, tip-shunt, ring and sleeve.
$4.60
P-H190 Jack Plate - 1-Hole, Metal, Black, 4.02" x 4.40"
Generic, one hole jack plate with a smooth black finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting hole has a diameter of 0.43" and fits Cliff jacks with external threads perfectly (see S-H902).
Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 3-3/16”
$3.25
P-H55 Plug - ¼", Straight, Used with F-Cap on Fender amps
Fender style 1/4" straight mono (tip-sleeve) open plug. Use with F-cap cover (P-H55F). Perfect for use as "open" plug for Fender "Hot Rod" and "Blues Reissue" amps having both "Main Speaker" and "External Speaker" jacks allowing you to connect an alternate speaker impedance with the open plug inserted in the "Main Speaker" jack (speaker load configuration 3).
$7.35
P-H166 Jack Plate - Electrosocket, for Tele, Anodized Aluminum
This modern cupstyle Tele® jackplate is milled from brass and has an shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$10.75
W-SC-188 Plug - Switchcraft, ¼", Mono 2-conductor, heavy-duty jumbo
Switchcraft Type 188 Jumbo Plug. ¼" Mono 2 Conductor Heavy Duty Cable Mount Plug - Nickel Finish.
$5.50
W-NK-PXST ¼" Plug - Neutrik, nickel body, nickel contacts
1/4" professional phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Starting at $3.65
W-SC-13E ¼" Jack - Switchcraft, Mono 2-Conductor, isolated break circuit
Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.
$6.50
W-AM-ACPS-GN Plug - Amphenol, ¼", Stereo, Satin
1/4" Stereo Phone plug, Diecast Shell, Satin finish, Flexible grommet. Features:
  • Stylised Shell design
  • Robust diecast shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • Flexible grommet cable protection
  • Quick and easy assembly
$3.75
Don't see what you're looking for? Send us your product suggestions!