Jacks & Plugs

Snap-in Lumberg panel mount barrel jack with solder lugs. This high quality jack is a similar size to the Lumberg low profile jack but easily snaps into place with no need to thread a nut inside the chassis. For use with barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.

Black or Red ring RCA phono jacks. Ceramic body with gold plating.

Cliff metal chassis mount XLR connectors. 3 pole, male, with machined connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. Mounting hardware not included. Features

• The housing can be either front or rear mounted using the same panel cutout
• Machined connectors
• Solder cup
• Connectors are fitted with a grounding lug
• Compatible with all other XLR brands

1/4" Mono Phone plug, Right angle, Diecast Shell, Satin finish, Flexible grommet. Features:

• Stylised Shell design
• Robust diecast shell
• Great solderability with increased solder area
• Precision machined contacts
• Flexible grommet cable protection
• Quick and easy assembly

Genuine Marshall SKTP-00005 jack. This 5 pin jack is used as the send jack of the effects loop of some Marshall amps such as the JCM2000. Nut and washer are not included with this jack. The bushing is M12 x1.0 thread.
For return jack, see S-H562

Fender R/A 1/4" mono jack. Used 1999-present. Hex nuts not included (S-H510).

1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.

Generic, 2 hole jack plate with a smooth black finish or with a zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:

• Horizontal- 3-9/16”
• Vertical- 2-15/16”

Generic, 2 hole jack plate with smooth black finish, textured black finish, or zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Multiple color options available. Center-To-Center mounting hole measurements are as follows:

• Horizontal- 3-9/16”
• Vertical- 3-3/16”

Peavey TRS jack with a switched tip and switched ring connection. Stereo HID (High Definition), insulated. Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.

Amphenol AX series XLR cable connector, 3 pole male, Machined contacts The revolutionary AX series of XLR connectors introduce an exciting contemporary look and feel to the professional audio interconnect market. They are designed to complement modern audio architecture and truly “fit" within their environment.

R/A stereo jack. Replacement for Fender amps 1999-present. Similar to Fender part: 005-3450-000

TS jack for Peavey with a switched tip connection. This jack features an additional tip connection used in some Peavey amps. 2 tip HID (High Definition), insulated, plastic bushing.

High quality made in USA ¼” plugs from Lava Cable. This right angle plug features an ultra low profile and a unique soldered connection that provides a quicker assembly than standard soldered connectors. The insulation system used in the plugs ensures a solid connection that is nearly impossible to short. Lava Soldered Right Angle Connectors are the smallest profile soldered plugs on the market today at only .405” in width and .515” in outer diameter. Soldering is easy with just one small solder point. Included insulators prevent shorting. To assemble:

• Strip 0.75” of the outside jacket from the end of the instrument cable.
• Feed the stripped end including the shield braid through the large black plastic insulator tube.

2 tip HID (High Definition), non-insulated, metal bushing. Please note that this does not include nuts or washers. Please see parts S-HRVNT S-HRVLW, and R-VNUT-38 if you require them.

Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole male, D Flange, Stamped contacts, Black Finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Note: A ground tag is standard on all AC "Z" series connectors. Although the ground tag is intended for RFI shielding applications, Amphenol cannot guarantee its effectiveness in all cases.

Plastic jack cup for input jack on speaker cabinets.

• Diameter = 3 3/4''
• Center to Center Screw Hole Spacing Distance = 2 1/8''

XLR 3 pole female, stamped contacts, nickel finish. Features:

• Unique Australian designed shell and housing.
• Ergonomic stylish sleeve design for improved grip.
• Oversized latch lever preserves your thumb.
• Leading first mate last break pin 1 on socket connectors.
• Chuck style cable clamp to suit 3mm - 8mm (0.118" - 0.314") cable.
• Overmolded cable support boot.
• New socket contact design for improved contact resistance.
• Precision machined pin contacts as standard.
• Compact 2.5mm (14AWG) solder buckets to reduce soldering

1/4" stereo jack. 3 PC mount terminals include: tip, ring and sleeve. Metric threading: M12 x 1.0.

Mates with standard dual binding posts with ¾" centers and can be staked for multiple connections. Polarity is indicated by rib. Gold plated screw connection.

PCB mount Fender original mono jack. Closed circuit.

Cliff metal chassis mount XLR connectors. 3 pole, female, with stamped connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. For greater reliability, the female connectors have contact pins which provide a large surface area and self-clean upon plug insertion. Mounting hardware not included. Features

• The housing can be either front or rear mounted using the same panel cutout
• A leading first mate last break socket contact is standard on all female connectors (Pin 1)
• Solder cup
• Connectors are fitted with a grounding lug
• Compatible with all other XLR brands

Original Fender® 3.5mm (1/8”) stereo phone jack . PC mount jack used as Auxiliary and headphone out for Mustang series amps.

Cliff UK 1/4" white jack, switched. 4 PC mount terminals include: tip, tip-shunt, sleeve and sleeve-shunt. External threading: 7/16-20. Features:

• Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
• 'Kinked' legs for snap-in PCB mounting on PC-A and PC-C styles to facilitate pre-assembly and wave soldering
• Tough, molded grade 1 white Nylon body.
• Made in the U.K.
• Supplied with a white nylon hexagonal mounting nut
• Designed to receive both mono and stereo 1/4" jack plugs

• Withstand Voltage: 2000VDC Min.
• Maximum Current: 5A
• Temperature Rating: -10°C ~ +70°C
• Life (Minimum): 10,000+ Operations
• Nominal Contact Resistance: < 50 mΩ