Jacks & Plugs

S-H601-X Jack - ¼", Solder Lugs, switched
Mono input. Solder lugs, shorting. Metal ferrule, vintage style. Similar to S-H901-X.
$1.25
S-H601A-X Jack - ¼", PC Mount, switched
Mono input. PC mount terminals. Metal ferrule. Shorting. Similar to S-H901PC-X.
$1.25
S-H650X Jack - Pure Tone, ¼", Mono, 2-Conductor, Open Circuit
Colors Available:
Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.
Starting at $4.20
S-H651X Jack - Pure Tone, ¼", Stereo, 3-Conductor, Double Open Circuit
Colors Available:
Pure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.
Starting at $5.20
S-H652N Jack - Pure Tone, ¼", Stereo, 3-Conductor, Double-Open Circuit, Long Thread
Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.
$9.99
On Backorder
S-H700 Jack Plate - Plug and Play, Mono / Stereo
The Plug and Play eliminates the confusing switch found on most stereo cabinets. Just pick your impedance and plug in. Label is set at the common 4/16 Ohm Mono and 8 Ohm Stereo. Ready to install with a steel dish, wires, and speaker connectors.
$15.95
S-H710 Jack Plate - Plain Dish, ~\frac{9}{16}~" Deep, 18 Gauge Steel
Plain dish to allow for drilling your own holes.
$4.95
S-H750-X Power Jack - DC Panel Mount
Colors Available:
½" panel mount with solder lugs. Round plastic with normally closed switch.
$0.95
S-H800 Jack Plate - Marshall, Switchable Stereo / Mono
Switchable stereo/mono jack plate for back of cabinets.
$48.60
S-H801 Jack Plate - Marshall, Mono or Stereo
Mono or stereo jack plate for back of cabinets.
$49.95
On Backorder
S-H901-PC-S-L Jack - Cliff, ¼", Stereo, PC Mount, L-Leg
Cliff S4 PC-A (L Leg). Stereo input jack, metal nut, 6 pin pc mount. Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability Tough, molded grade 1 black Nylon body. Supplied with a black nylon hexagonal mounting nut. Designed to receive both mono and stereo ¼" jack plugs.
$1.95
S-H901-PC-X Jack - Cliff, ¼", PC Mount, for Marshall, metal nut
PC terminals, switched. Metal ferrule, vintage style.
Starting at $2.30
S-H901-X Jack - Cliff, ¼", Solder Lug, for Marshall, metal nut
Solder terminals, switched. Metal ferrule, vintage style.
Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • Tough, molded grade 1 black Nylon body.
  • Made in the U.K.
  • Supplied with a metal hexagonal mounting nut
  • Designed to receive both mono and stereo 1/4" jack plugs

Withstand Voltage: 2000VDC Min. Maximum Current: 5A Temperature Rating: -10°C ~ +70°C Life (Minimum): 10,000+ Operations Nominal Contact Resistance: < 50 mΩ
Starting at $2.30
S-H902-X Jack - Cliff, ¼", solder lugs, switched
Solder terminals, switched. Used in modern Marshall amps. Features: Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability, tough, molded grade 1 black Nylon body.
Starting at $1.95
S-H902G Jack - Cliff, ¼", Mono, Switched, Gold
Mono input jack. 4 solder terminals, switched. Used in modern Marshall amps.
$2.35
S-H903-X Jack - Cliff, ¼", PC Mount, switched
Input Jack. PC board terminals, switched. Used in modern Marshall amps, or as a replacement part for Marshall JCM 900 cabinets and more.
$1.95
S-H903L-X Jack - Cliff, ¼", PC Mount, L-Leg
Input jack, 4 PC board terminals, switched, L-leg mounting. Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability.
Starting at $2.10
S-H906 Jack - Cliff, ¼", Mono, PC Mount, L-leg, Tin
  • Withstand voltage: 2000V DC Minimum
  • Maximum current: 5A
  • Temperature rating: -10°C - 70°C
  • Life (minimum): 10,000+ operations
  • Nominal contact resistance:
$2.80
S-H910-X Jack - Cliff, ¼", Sealed, Switched
Original Cliff sealed and switched blue jack. Fully threaded. Many types of professional music equipment nowadays use high power components, and need to be cooled by fans. Fans draw in dust and pollutants which can adversely affect the contacts of conventional jacks, with exposed contacts. This sealed jack avoids possibility of contamination of contacts by means of a sealing cover over the top and bottom of the jack.
$2.50
S-H911-SEAL Jack Seal - Cliff, for S-H910 and S-H911
Replacement seal for S-H910 and S-H911 Cliff UK jacks.
$0.50
S-H951-X Jack - Cliff, ¼", White, Solder Lug
Cliff UK 1/4" white jack. External threading: 7/16-20. Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability. Tough, molded Nylon body.
Starting at $2.15
S-H955-X Jack - Cliff, ¼", PC Mount, switched, white
Cliff UK 1/4" white jack, switched. 4 PC mount terminals include: tip, tip-shunt, sleeve and sleeve-shunt. External threading: 7/16-20. Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • 'Kinked' legs for snap-in PCB mounting on PC-A and PC-C styles to facilitate pre-assembly and wave soldering
  • Tough, molded grade 1 white Nylon body.
  • Made in the U.K.
  • Supplied with a white nylon hexagonal mounting nut
  • Designed to receive both mono and stereo 1/4" jack plugs
  • Withstand Voltage: 2000VDC Min.
  • Maximum Current: 5A
  • Temperature Rating: -10°C ~ +70°C
  • Life (Minimum): 10,000+ Operations
  • Nominal Contact Resistance: < 50 mΩ
$2.15
S-H960 Bezel - Cliff, Black for S4 Jack Socket
Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.
$0.20
S-H961 Bezel / Nut - Cliff, For S4, Combined Nut / Bezel, Black
Genuine Cliff™ replacement combination nut/bezel for S4 Series jacks.
  • 3/8” thread diameter/20 TPI
  • 3/16” thread length
  • 7/16” nut
  • Used on many Marshall amps
  • Matte black finish
  • Sold individually.
$0.45
Don't see what you're looking for? Send us your product suggestions!