Jacks & Plugs

W-NK-901-PC-X ¼" Jack - Neutrik, Switched, Chrome Nut, Straight PC
1/4" enclosed jack, switched, with chrome ferrule and straight PCB pins, mounting nut included. Wide body and extremely durable contacts.
Starting at $1.26
Save 10%
Originally: $1.40
S-H9FER Ferrule - for Cliff UK Jacks, Chrome
Ferrule for internal thread jacks, chrome (3/8-20).
$0.45
Save 10%
Originally: $0.50
P-H55F F-Cap - Plastic Cap for Straight Plug P-H55
F-cap, black plastic. Similar to that used on old Fender ® amps.
$4.95
Save 10%
Originally: $5.50
W-SC-3502A RCA Plug - Switchcraft, straight, 2-conductor, long handle
Switchcraft 2 conductor shielded RCA straight plug, solid pin, accommodates cable up to 0.290" (7.366mm) diameter, solder cup on center. Long handle & cable clamp, Nickel Handle, Nickel Plug
$2.30
Save 10%
Originally: $2.55
P-JB-IN-U Power Jack - DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
Low profile DC jack with solder lugs. This jack is the perfect size for smaller builds where additional space is necessary. The low profile DC jack is also great for builds where aesthetics are a priority. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Features two solder lugs for tip and ring.
$0.53
Save 10%
Originally: $0.59
S-H525 ¼" Jack - Peavey, Mono, PC Mount, non-insulated
12 ½" mm, mono, non-insulated, rean, PC mount.
$7.16
Save 10%
Originally: $7.95
P-H166 Jack Plate - Electrosocket, for Tele, Anodized Aluminum
This modern cupstyle Tele® jackplate is milled from brass and has an shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$9.68
Save 10%
Originally: $10.75
W-SC-13A ¼" Jack - Switchcraft, Mono, transfer circuit
1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.
$4.91
Save 10%
Originally: $5.45
W-QP-WASHER Washer - Flat, for use on Qingpu Jacks
Flat washer for W-QP-419GR and W-QP-518MA 3.5mm jacks.
$0.06
Save 14%
Originally: $0.07
P-JB-EN-S Power Jack - DC Panel Mount, Rear Mount, 5.5mm External, 2.1mm Internal
½" panel mount DC jack with solder lugs. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch.
$0.53
Save 10%
Originally: $0.59
S-H522 ¼" Jack - Mono, for Peavey, Insulated
2 tip HID (High Definition), insulated, plastic bushing. Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
$1.94
Save 10%
Originally: $2.15
S-H532-A ¼" Jack - Stereo, PC Mount, metric threading
1/4" stereo jack. 3 PC mount terminals include: tip, ring and sleeve. Metric threading: M12 x 1.0.
$1.76
Save 10%
Originally: $1.95
W-RN-920-X 3.5mm Plug - Rean, cable mount, nickel-plated brass
High quality 3.5mm (1/8") plug. Features nickel plated brass contacts, with a nickel plated zinc shell. This plug uses a crimp strain relief for use with 4 mm O.D cables.
Starting at $0.85
Save 11%
Originally: $0.95
W-QP-NUT-H Nut - Hex, for mounting Qingpu 3.5mm jacks
Hex nut for W-QP-419GR and W-QP-518MA 3.5mm jacks.
See W-QP-NUT-K for the knurled, slotted version of this nut.
See W-QP-WASHER for compatible washer
$0.06
Save 14%
Originally: $0.07
P-H55 ¼" Plug - Straight, Used with F-Cap on Fender amps
Fender style 1/4" straight mono (tip-sleeve) open plug. Use with F-cap cover (P-H55F). Perfect for use as "open" plug for Fender "Hot Rod" and "Blues Reissue" amps having both "Main Speaker" and "External Speaker" jacks allowing you to connect an alternate speaker impedance with the open plug inserted in the "Main Speaker" jack (speaker load configuration 3).
$6.62
Save 10%
Originally: $7.35
S-H960 Bezel - Cliff, Black for S4 Jack Socket
Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.
$0.18
Save 10%
Originally: $0.20
P-H191-B Jack Plate - 2-Hole, Metal, 3.5" x 5.13", Black
Generic, 2 hole jack plate with a smooth black finish or with a zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 2-15/16”
$2.93
Save 10%
Originally: $3.25
S-H601A-X ¼" Jack - PC Mount, switched, mono
Mono input. PC mount terminals. Metal ferrule. Shorting. Similar to S-H901PC-X.
$1.25
Save 10%
Originally: $1.39
S-H902G ¼" Jack - Cliff, Mono, Switched, Gold
Mono input jack. 4 solder terminals, switched. Used in modern Marshall amps.
$2.12
Save 10%
Originally: $2.35
S-H9NT-W Nut - Cliff, Hex, for ¼" white Jacks
Hex nut for white Cliff Jacks, threading: 7/16-20
$0.45
Save 10%
Originally: $0.50
P-H190 Jack Plate - 1-Hole, Metal, 4.02" x 4.40", Black
Generic, one hole jack plate with a smooth black finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting hole has a diameter of 0.43" and fits Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 3-3/16”
$2.93
Save 10%
Originally: $3.25
S-H906 ¼" Jack - Cliff, Mono, PC Mount, L-leg, Tin
  • Withstand voltage: 2000V DC Minimum
  • Maximum current: 5A
  • Temperature rating: -10°C - 70°C
  • Life (minimum): 10,000+ operations
  • Nominal contact resistance:
$2.52
Save 10%
Originally: $2.80
W-SC-112AX ¼" Jack - Switchcraft, Enclosed, Mono, Shunt Tip
The Switchcraft Type 112A enclosed ¼” jack is a high quality jack featuring a switched tip. This jack has three solder lugs. One for the tip, one for the sleeve, and one for the switch which connects to the tip when no plug is inserted. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer
  • Type 112AX
  • 0.276" bushing length (standard)
  • Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
  • Mono 2-Conductor
  • Includes nut and washer
  • Tip is shunt
$2.15
Save 10%
Originally: $2.39
W-SC-13E ¼" Jack - Switchcraft, Mono, isolated break circuit
Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.
$5.85
Save 10%
Originally: $6.50
Don't see what you're looking for? Send us your product suggestions!