Jacks & Plugs

S-H901-PC-X ¼" Jack - Cliff, PC Mount, for Marshall, metal nut
PC terminals, switched. Metal ferrule, vintage style.
Starting at $2.95
P-H180 Jack Plate - Single ¼", 2" Outside Diameter, Black Metal
Recessed steel cup designed for use with 1/4" jacks. Steel design with three mounting holes. Hardware is not included
$1.03
S-H534 ¼" Jack - Stereo, Panel Mount, Low Profile
Panel mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.
  • M9*0.75 Bushing Thread
  • Stereo 3-Conductor (TRS)
  • Open Circuit (does not have switched terminal).
  • Includes nut and washer.
$0.99
W-RN-12B ¼" Jack - Rean, Stereo, Open Circuit
3 pole open 1/4" jack, 3 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs
$1.49
S-H506-A ¼" Jack - Mono, PC Mount, for Fender® Amps '88 - '99
Fender® Style ¼" Mono Input Jack with 4 PCB Terminals.
$1.99
S-H260X Tip Jack - Insulated Deluxe, panel mount
Colors Available:
  • Deluxe for standard .080" tip plug.
  • Machined contact with turret terminal
  • Hex socket head .188 for ease in mounting
  • Closed entry blocks access of probes greater than 0.085
  • Nylon UL approved for self extinquishing
  • Brass body
  • Silver finish
  • Contact: Brass with wrap around beryllium copper spring
  • Finish: Silver
  • Body: Nylon
  • Hardware: Nickel-plated nut
  • Body thread stripping torque: 0.4lb. in
  • Panel thickness: Up to 0.437
  • Current Rating: 10 A
  • Breakdown voltage: 5700 Vrms min
  • Contact resistance: 0.010 ohms max
  • Contact to panel C: 2 pF nominal
$2.75
W-SC-228-X ¼" Plug - Switchcraft, flat cable-mount, right-angle
Switchcraft ¼" Mono 2-conductor cable-mount plug. Flat shielded handle with solder terminals. Type 228. Used in Fender amps for speaker connections. Also perfect for close quarters pedal-to-pedal connections. Includes hardware
Starting at $5.95
W-SC-12A-T ¼" Jack - Mono, Switched Tip, made in Taiwan.
¼" female mono TS jack, shorting type, made in Taiwan.
$1.60
S-H280 Cable - vintage-style, ¼" to 2 Spade Lugs, 34" long
Vintage style speaker cable. ¼" plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 34" total length.
$4.99
S-H507-A ¼" Jack - Stereo, PC Mount, for Fender® Amps '88 - '99
Fender® Style replacement ¼" stereo input jack that has 9 PCB mount terminals.
$2.40
W-QP-518MA-BM 3.5mm Jack - Qingpu, Eurorack, Mono, Switched Tip, Snap-In, PCM
3.5mm TS jacks with a switched tip found in many DIY Eurorack projects. The WQP-WQP518MA-BM is the new improved version of the WQP-PJ301BM featuring Qingpu’s rugged square based bushing. The sleeve connection is through the outer bracket that snaps into place on the pcb allowing for easy construction and panel fitting. Hardware sold separately. See accessory items below.
$0.50
W-SC-152B ¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
$8.95
S-H-BANANA-X Banana Jack - Johnson Cinch, For 4mm Plugs, Panel Mount
Colors Available:
High quality banana jacks with tinned brass contacts and strong nylon housings. These jacks come in a wide variety of colors and work well with any 4mm banana plug. Cinch Johnson banana jacks are used in test equipment, audio equipment, as well as modular synthesizers such as DIY Buchla, Serge, and others. Features:
  • Formed brass contacts
  • Bright tin finish
  • Durable nylon 6/6 body
  • Nickel plated nut
  • 0.010Ω maximum contact resistance
  • Keyed mounting with two flatted sides
Starting at $1.45
W-SC-111X ¼" Jack - Switchcraft, Enclosed, Mono
The Switchcraft Type 111X enclosed ¼” jack is a high quality mono jack. This jack has two solder lugs. One for the tip and one for the sleeve. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer.
  • Type 111X
  • 0.276" bushing length (standard)
  • Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
  • Mono 2-Conductor
  • Includes nut and washer

See W-SC-112BX for stereo
$2.55
S-H903L-X ¼" Jack - Cliff, PC Mount, L-Leg
Input jack, 4 PC board terminals, switched, L-leg mounting. Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability.
Starting at $2.79
P-JB-IN-U Power Jack - DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
Low profile DC jack with solder lugs. This jack is the perfect size for smaller builds where additional space is necessary. The low profile DC jack is also great for builds where aesthetics are a priority. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Features two solder lugs for tip and ring.
$0.70
W-QP-NUT-BRASS Nut - Mod® "Top Brass", for Qingpu and other 3.5mm jacks
Mod® "Top Brass" nuts are the easiest way to upgrade your Eurorack module or other 3.5 mm application to a more regal look - we call it "Top Brass". Designed with the same outer dimensions as Qingpu knurled nuts, these round brass nuts will fit any module using Qingpu or other similar metal-bushing jacks without covering up the jack labels. As their name implies, the Mod® "Top Brass" nuts are made out of pure brass, and while they look incredible on their own, their appearance also pairs extremely well with the immersion gold used on Make Noise and other similar modules. Rather than being knurled, Top Brass nuts have a smooth outer edge for a clean look. The nuts are slotted and will work with all existing nut drivers intended for use with the knurled Qingpu-style nuts. "Top Brass" nuts use M6x0.5 threading which matches the bushing on the ubiquitous Qingpu jacks and many of their copies.
$0.35
P-JBCL-EN-S Power Jack - Cliff, DC Panel Mount, Rear Mount, 5.5mm External, 2.1mm Internal
High quality ½" panel mount DC jack with solder lugs from Cliff Electronic Components. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch. Mounting nut included.
$1.15
S-H960 Bezel - Cliff, Black for S4 Jack Socket
Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.
$0.25
S-H268X RCA Jack - Chassis Mount, Rear Mount, Gold Plated
Colors Available:
Black/red/white band female chassis mount jacks. Sold individually, back panel mount.
Starting at $2.55
P-JB-PC-S Power Jack - DC PC Mount, 5.5mm External, 2.1mm Internal
This PCB mounted DC jack style can be found on many manufacturers’ pedals. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder pins are available for tip, ring, and switch.
$0.64
S-H9NT-R Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
$0.91
P-H60 ¼" Plug - G&H, Mono, Right Angle, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2" profile.
$4.85
P-H50 ¼" Plug - G&H, Mono, Nickel, Copper Core
Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in the USA. 1/2 inch body diameter for instrument and smaller wire speaker applications. Features:
  • Shielded handle
  • Large cable clamp
  • Independent ground
  • Copper-core construction
$2.95
Don't see what you're looking for? Send us your product suggestions!