Jacks & Plugs

S-H514 Nut & Washer - Panel, for Fender / Marshall Jacks
Package of 5
M12 x1.0 thread. Package of 5.
$1.35
Save 10%
Originally: $1.50
S-H901-X ¼" Jack - Cliff, Solder Lug, for Marshall, metal nut
Solder terminals, switched. Metal ferrule, vintage style.
Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • Tough, molded grade 1 black Nylon body.
  • Made in the U.K.
  • Supplied with a metal hexagonal mounting nut
  • Designed to receive both mono and stereo 1/4" jack plugs

Withstand Voltage: 2000VDC Min. Maximum Current: 5A Temperature Rating: -10°C ~ +70°C Life (Minimum): 10,000+ Operations Nominal Contact Resistance: < 50 mΩ
Starting at $2.07
Save 10%
Originally: $2.30
W-SC-12A ¼" Jack - Switchcraft, Mono, shunt tip
Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer
Starting at $2.02
Save 10%
Originally: $2.25
S-H902-X ¼" Jack - Cliff, solder lugs, switched
Solder terminals, switched. Used in modern Marshall amps. Features: Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability, tough, molded grade 1 black Nylon body.
Starting at $1.75
Save 10%
Originally: $1.95
W-SC-11 ¼" Jack - Switchcraft, Mono, open circuit
Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.
Starting at $1.76
Save 10%
Originally: $1.95
S-H650X ¼" Jack - Pure Tone, Mono, Open Circuit
Colors Available:
Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.
Starting at $3.78
Save 10%
Originally: $4.20
S-H506-A ¼" Jack - Mono, PC Mount, for Fender® Amps '88 - '99
Fender® Style ¼" Mono Input Jack with 4 PCB Terminals.
$1.44
Save 10%
Originally: $1.60
S-H903-X ¼" Jack - Cliff, PC Mount, switched, black
Input Jack. PC board terminals, switched. Used in modern Marshall amps, or as a replacement part for Marshall JCM 900 cabinets and more. See S-H955-X for white version.
$1.75
Save 10%
Originally: $1.95
S-H507-A ¼" Jack - Stereo, PC Mount, for Fender® Amps '88 - '99
Fender® Style replacement ¼" stereo input jack that has 9 PCB mount terminals.
$1.58
Save 10%
Originally: $1.75
W-SC-152B ¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
$8.06
Save 10%
Originally: $8.95
S-H506 ¼" Jack - Fender®, PC Mount, Mono
Original 4-pin Fender jack. Fits Fender amplifiers from 1988 - 1999. PC mount.
$4.46
Save 10%
Originally: $4.95
S-H901-PC-X ¼" Jack - Cliff, PC Mount, for Marshall, metal nut
PC terminals, switched. Metal ferrule, vintage style.
Starting at $2.07
Save 10%
Originally: $2.30
S-H903L-X ¼" Jack - Cliff, PC Mount, L-Leg
Input jack, 4 PC board terminals, switched, L-leg mounting. Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability.
Starting at $1.89
Save 10%
Originally: $2.10
W-RN-11X ¼" Jack - Rean, Mono, Open Circuit
2 pole open 1/4" jack, 2 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs
$1.13
Save 10%
Originally: $1.25
S-H507 ¼" Jack - Fender®, Stereo, PC Mount, for Amps '88-'99
Original replacement for Fender® amps. ¼" Stereo Input Jack that has 9 PCB mount terminals.
$5.63
Save 10%
Originally: $6.25
S-H521 ¼" Jack - Peavey, Mono, non-insulated
2 tip HID (High Definition), non-insulated, metal bushing. Please note that this does not include nuts or washers. Please see parts S-HRVNT S-HRVLW, and R-VNUT-38 if you require them.
$2.68
Save 10%
Originally: $2.98
S-H9NT-R Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
$0.53
Save 10%
Originally: $0.59
On Backorder
S-H601-X ¼" Jack - Solder Lugs, switched, shorting
Mono input. Solder lugs, shorting. Metal ferrule, vintage style. Similar to S-H901-X.
$1.17
Save 10%
Originally: $1.30
S-H901-PC-S-L ¼" Jack - Cliff, Stereo, PC Mount, L-Leg
Cliff S4 PC-A (L Leg). Stereo input jack, metal nut, 6 pin pc mount. Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability Tough, molded grade 1 black Nylon body. Supplied with a black nylon hexagonal mounting nut. Designed to receive both mono and stereo ¼" jack plugs.
$1.76
Save 10%
Originally: $1.95
W-RN-12B ¼" Jack - Rean, Stereo, Open Circuit
3 pole open 1/4" jack, 3 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs
$1.26
Save 10%
Originally: $1.40
W-SC-13 ¼" Jack - Switchcraft, Mono, isolated make circuit
Switchcraft ¼" Mono 2-Conductor Input Jack, Isolated Make Circuit (Type 13). Includes nut and washer
$3.74
Save 10%
Originally: $4.15
S-H951-X ¼" Jack - Cliff, White, Solder Lug
Cliff UK 1/4" white jack. External threading: 7/16-20. Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability. Tough, molded Nylon body.
Starting at $1.93
Save 10%
Originally: $2.15
S-H523 ¼" Jack - Peavey, Stereo, Plastic Bushing
Stereo, insulated, plastic bushing, bushing length = 0.29". Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
$2.25
Save 10%
Originally: $2.50
W-SC-13B ¼" Jack - Switchcraft, Stereo, shunt tip
Switchcraft 1/4" stereo jack, 4 solder lugs include: tip, tip-shunt, ring and sleeve.
$4.14
Save 10%
Originally: $4.60
Don't see what you're looking for? Send us your product suggestions!