Jacks & Plugs

P-H180 Jack Plate - Single ¼", 2" Outside Diameter, Black Metal
  • Recessed steel cup
  • Designed for use with 1/4" jacks
  • Steel design
  • 3 mounting holes
$0.85
S-H260X Tip Jack - Insulated Deluxe
Colors Available:
  • Deluxe for standard .080" tip plug.
  • Machined contact with turret terminal
  • Hex socket head .188 for ease in mounting
  • Closed entry blocks access of probes greater than 0.085
  • Nylon UL approved for self extinquishing
  • Brass body
  • Silver finish
  • Contact: Brass with wrap around beryllium copper spring
  • Finish: Silver
  • Body: Nylon
  • Hardware: Nickel-plated nut
  • Body thread stripping torque: 0.4lb. in
  • Panel thickness: Up to 0.437
  • Current Rating: 10 A
  • Breakdown voltage: 5700 Vrms min
  • Contact resistance: 0.010 ohms max
  • Contact to panel C: 2 pF nominal
$1.75
S-H700 Jack Plate - Plug and Play, Mono / Stereo
The Plug and Play eliminates the confusing switch found on most stereo cabinets. Just pick your impedance and plug in. Label is set at the common 4/16 Ohm Mono and 8 Ohm Stereo. Ready to install with a steel dish, wires, and speaker connectors.
$15.95
S-H800 Jack Plate - Marshall, Switchable Stereo / Mono
Switchable stereo/mono jack plate for back of cabinets.
$48.60
P-H167-X Jack Plate - for Telecasters
Colors Available:
Avoid loose output jacks with this black jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.
  • Capable of being screwed directly onto switchcraft jacks
$5.00
P-H150 Jack Plate - Marshall, for Input Jack On Speaker Cabs, Plastic
Plastic jack cup for input jack on speaker cabinets.
  • Diameter = 3 3/4''
  • Center to Center Screw Hole Spacing Distance = 2 1/8''
$7.15
S-H750-X Power Jack - DC Panel Mount, 5.5mm External, 2.1mm Internal
Colors Available:
½" panel mount with solder lugs. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.
$0.95
P-H191-B Jack Plate - 2-Hole, Metal, 3.5" x 5.13", Black
Generic, 2 hole jack plate with a smooth black finish or with a zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 2-15/16”
$3.25
P-H100X Jack Plate - Fits Les Paul, Plastic
Colors Available:
Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.
$1.95
P-H190 Jack Plate - 1-Hole, Metal, 4.02" x 4.40", Black
Generic, one hole jack plate with a smooth black finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting hole has a diameter of 0.43" and fits Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 3-3/16”
$3.25
P-H166 Jack Plate - Electrosocket, for Tele, Anodized Aluminum
This modern cupstyle Tele® jackplate is milled from brass and has an shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$10.75
P-H192-X Jack Plate - 2-Hole, Metal, 4.02" x 4.41"
Colors Available:
Generic, 2 hole jack plate with smooth black finish, textured black finish, or zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Multiple color options available.
Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 3-3/16”
Starting at $3.25
W-SC-A3X XLR Plug - Switchcraft, premium, cable-mount
Switchcraft XLR 3-Pin Cable Mount Plug (Type A3F) Nickel body. Silver contacts. Latchlock. The original A Series premium XLR connector with adjustable dual pressure plate cable clamp, flexible strain relief, and removable pin insert. Cable-mount with silver pins. Nickel. Provides secure cable lock and strain relief for all standard size cables. Specifications Construction Sturdy, die-cast zinc with satin nickel finish to withstand hard use - even abuse. Insert Insulation High-impact, molded thermoplastic provides high dielectric strength, and superior insulation resistance. Locking Latchlock on female plugs and receptacles locks into groove in mating male connector to prevent accidental disconnect.
Starting at $4.35
W-AM-AC3MJ XLR Plug - Amphenol, Large, Nickel
XLR 3 pole male, stamped contacts, nickel finish, jaws cable clamp. Features:
  • Zinc Diecast Shell
  • Solder Bucket connections
  • "Jaws" Cable Retention System
  • Leading first mate last break socket contact
  • Quick and easy assembly without screws
  • Precision machined contacts
$1.90
W-AM-AC3FJ XLR Plug - Amphenol, Female, Large Jaw, Nickel
XLR 3 pole female, stamped contacts, large jaws cable clamp.
$2.35
S-H801 Jack Plate - Marshall, Mono or Stereo
Mono or stereo jack plate for back of cabinets.
$53.80
W-AM-AC3MMX XLR Plug - Amphenol, Machined Contacts
Colors Available:
XLR 3 pole male, machined contacts, jaws cable clamp. Features:
  • Zinc Diecast Shell
  • Solder Bucket connections
  • "Jaws" Cable Retention System
  • Leading first mate last break socket contact
  • Quick and easy assembly without screws
  • Precision machined contacts
Starting at $2.65
W-AM-AX3MX XLR Plug - Amphenol, Professional
Colors Available:
Amphenol AX series XLR cable connector, 3 pole male, Machined contacts The revolutionary AX series of XLR connectors introduce an exciting contemporary look and feel to the professional audio interconnect market. They are designed to complement modern audio architecture and truly “fit" within their environment.
Starting at $3.35
W-AM-AC3MCP XLR Plug - Amphenol, Thermoplastic, Stamped
XLR 3 pole male, stamped contacts, thermoplastic shell, jaws cable clamp. Plastic. Features:
  • Thermoplastic shell
  • Solder Bucket connections
  • "Jaws" Cable Retention System
  • Stamped contacts
  • Leading first mate last break socket contact
  • Quick and easy assembly without screws
$1.85
W-AM-AX3FB-AU XLR Plug - Amphenol, Female, Black, Gold-Plated
XLR 3 pole female, stamped gold plated contacts, black finish. Features:
  • Unique Australian designed shell and housing
  • Ergonomic stylish sleeve design for improved grip
  • Oversized latch lever preserves your thumb
  • Leading first mate last break pin 1 on socket connectors
  • Chuck style cable clamp to suit 3mm - 8mm (0.118" - 0.314") cable
  • Overmolded cable support boot
  • New socket contact design for improved contact resistance
  • Precision machined pin contacts
  • Compact 2.5mm (14AWG) solder buckets to reduce soldering time and
$4.15
W-AM-AX3MB-AU XLR Plug - Amphenol, Black, Gold-Plated
Amphenol AX series XLR cable connector, 3 pole male, Machined gold-plated contacts, Black Finish The revolutionary AX series of XLR connectors introduce an exciting contemporary look and feel to the professional audio interconnect market. They are designed to complement modern audio architecture and truly “fit" within their environment.
$4.95
W-AM-AC3FX XLR Plug - Amphenol, Female, Jaws Clamp
Colors Available:
XLR 3 pole female, stamped contacts, jaws cable clamp.
Features:
  • Zinc Diecast Shell
  • Solder Bucket connections
  • "Jaws" Cable Retention System
  • Precision machined contacts
  • Leading first mate last break socket contact
  • Quick and easy assembly without screws
Starting at $2.65
W-AM-AC3MMCP XLR Plug - Amphenol, Thermoplastic, Machined Contacts
XLR 3 pole male, stamped contacts, thermoplastic shell, jaws cable clamp. Plastic. Features:
  • Thermoplastic shell
  • Solder Bucket connections
  • "Jaws" Cable Retention System
  • Precision machined contacts
  • Leading first mate last break socket contact
  • Quick and easy assembly without screws
$2.45
W-AM-AX3F XLR Plug - Amphenol, Female, Nickel
XLR 3 pole female, stamped contacts, nickel finish. Features:
  • Unique Australian designed shell and housing.
  • Ergonomic stylish sleeve design for improved grip.
  • Oversized latch lever preserves your thumb.
  • Leading first mate last break pin 1 on socket connectors.
  • Chuck style cable clamp to suit 3mm - 8mm (0.118" - 0.314") cable.
  • Overmolded cable support boot.
  • New socket contact design for improved contact resistance.
  • Precision machined pin contacts as standard.
  • Compact 2.5mm (14AWG) solder buckets to reduce soldering
$3.35
Don't see what you're looking for? Send us your product suggestions!