Jacks & Plugs

S-H700 Jack Plate - Plug and Play, Mono/Stereo
The Plug and Play eliminates the confusing switch found on most stereo cabinets. Just pick your impedance and plug in. Label is set at the common 4/16 Ohm Mono and 8 Ohm Stereo. Ready to install with a steel dish, wires, and speaker connectors. Direct replacement for many existing small jack dishes. Can be used for the following configurations:
  • 4 ohm mono
  • 8 ohm left + 8 ohm right stereo
  • 8 ohm left only mono
  • 8 ohm right only mono
  • 16 ohm mono
$14.36
Save 10%
Originally: $15.95
S-H800 Jack Plate - Marshall, Switchable Stereo/Mono
Switchable stereo/mono jack plate for back of cabinets.
$43.74
Save 10%
Originally: $48.60
P-H180 Jack Plate - Single ¼", 2" Outside Diameter, Black Metal
  • Recessed steel cup
  • Designed for use with 1/4" jacks
  • Steel design
  • 3 mounting holes
$0.77
Save 9%
Originally: $0.85
P-H150 Jack Cup - Marshall, for Input Jack On Speaker Cabs, Plastic
Plastic jack cup for input jack on speaker cabinets.
  • Diameter = 3 3/4''
  • Center to Center Screw Hole Spacing Distance = 2 1/8''
$6.44
Save 10%
Originally: $7.15
P-H190 Jack Plate - 1-Hole, Metal, Black, 4.02" x 4.40"
Generic, one hole jack plate with a smooth black finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting hole has a diameter of 0.43" and fits Cliff jacks with external threads perfectly (see S-H902).
Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 3-3/16”
$2.93
Save 10%
Originally: $3.25
P-H191-B Jack Plate - 2-Hole, Metal, 3.5" x 5.13", Black
Generic, 2 hole jack plate with a smooth black finish or with a zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 2-15/16”
$2.93
Save 10%
Originally: $3.25
P-H167-X Jack Mount - for Telecasters
Colors Available:
Avoid loose output jacks with this black jack mount for Telecaster guitars. Includes two angled screws that ensure that the jack will be held tightly in place. Multiple color options available.
  • Capable of being screwed directly onto switchcraft jacks
$4.50
Save 10%
Originally: $5.00
P-H100X Jack Plate - Fits Les Paul, Plastic
Colors Available:
Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.
$1.75
Save 10%
Originally: $1.95
P-H166 Jack Plate - Electrosocket, for Tele, Anodized Aluminum
This modern cupstyle Tele® jackplate is milled from brass and has an shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$9.68
Save 10%
Originally: $10.75
W-SC-D3M Jack - Switchcraft, premium XLR, Male 3-Pin, rectangular panel-mount
Male receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter. Standard latchlock. Mates with W-SC-D3F
$3.15
Save 10%
Originally: $3.50
W-SC-D3F Jack - Switchcraft, premium XLR, Female 3-Pin, rectangular panel-mount
Female receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter. Standard latchlock. Mates with W-SC-D3M
$4.95
Save 10%
Originally: $5.50
S-H801 Jack Plate - Marshall, Mono or Stereo
Mono or stereo jack plate for back of cabinets.
$44.96
Save 10%
Originally: $49.95
W-SC-C3M Jack - Switchcraft, premium XLR, 3-Pin Male, circular panel-mount
C Series Circular Panel Mount 3 Pin XLR Male, mounts with #5 Screws (Not included) - Silver Pins / Nickel Finish. Mates with W-SC-C3F.
$7.16
Save 10%
Originally: $7.95
W-SC-C3F Jack - Switchcraft, premium XLR, 3-Pin Female, circular panel-mount
C Series Circular Panel Mount 3 Pin XLR Female, mounts with #5 Screws (Not included) - Silver Pins / Nickel Finish. Mates with W-SC-C3M.
$9.27
Save 10%
Originally: $10.30
P-H192-X Jack Plate - 2-Hole, Metal, 4.02" x 4.41"
Colors Available:
Generic, 2 hole jack plate with smooth black finish, textured black finish, or zinc chrome finish. Perfect for use as a jack plate on speaker cabinets. The jack mounting holes have a diameter of 0.43" and fit Cliff jacks with external threads perfectly (see S-H902). Multiple color options available.
Center-To-Center mounting hole measurements are as follows:
  • Horizontal- 3-9/16”
  • Vertical- 3-3/16”
Starting at $2.92
Save 10%
Originally: $3.25
S-H710 Jack Plate - Plain Dish, ~\frac{9}{16}~" Deep, 18 Gauge Steel
Plain dish to allow for drilling your own holes.
$2.93
Save 10%
Originally: $3.25
Don't see what you're looking for? Send us your product suggestions!