Jacks & Plugs
DunlopDunlop is a manufacturer of picks, pedals, and accessories for over 50 years.
MarshallMarshall guitar amplifiers are among the most recognized in the world. They are known for their Marshall "crunch".
NeutrikNeutrik is a manufacturer of audio connectors and receptacles based in Liechtenstein.
SwitchcraftSwitchcraft is a leading supplier of a broad line of jacks and plugs for audio applications.
¼" Jack - Switchcraft, Mono, shunt tip
Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer
Starting at $2.25
¼" Jack - Switchcraft, Mono, open circuit
Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.
Starting at $1.95
¼" Plug - Switchcraft, cable-mount
Switchcraft Type 280. ¼” straight plug with solder lugs and cable clamp. Switchcraft Heavy duty machined copper alloy handle, tip and body for unsurpassed ruggedness
Starting at $3.15
¼" Plug - Switchcraft, flat cable-mount, right-angle
Switchcraft ¼" Mono 2-conductor cable-mount plug. Flat shielded handle with solder terminals. Type 228. Used in Fender amps for speaker connections. Also perfect for close quarters pedal-to-pedal connections. Includes hardware
Starting at $4.95
¼" Plug - Switchcraft, cable-mount, right-angle
Switchcraft ¼" Right Angle Plug (Type 226) Good for tight spaces Large terminals accept up to 16 AWG wiring (cables up to 0.25" diameter) All Metal exterior
Starting at $5.25
¼" Jack - Switchcraft, Stereo, double open circuit, deep panel
Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.
Jack Plate - Marshall, Switchable Stereo / Mono
Switchable stereo/mono jack plate for back of cabinets.
Jack Plate - Marshall, for Input Jack On Speaker Cabs, Plastic
Plastic jack cup for input jack on speaker cabinets.
- Diameter = 3 3/4''
- Center to Center Screw Hole Spacing Distance = 2 1/8''
¼" Jack - Switchcraft, Mono, isolated make circuit
Switchcraft ¼" Mono 2-Conductor Input Jack, Isolated Make Circuit (Type 13). Includes nut and washer
XLR Jack - Switchcraft, premium, rectangular panel-mount
Receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter. Standard latchlock;
Starting at $3.50
¼" Jack - Switchcraft, Mono, transfer circuit
1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.
¼" Jack - Switchcraft, Stereo, shunt tip
Switchcraft 1/4" stereo jack, 4 solder lugs include: tip, tip-shunt, ring and sleeve.
RCA Plug - Switchcraft, straight, 2-conductor, long handle
Switchcraft 2 conductor shielded RCA straight plug, solid pin, accommodates cable up to 0.290" (7.366mm) diameter, solder cup on center. Long handle & cable clamp, Nickel Handle, Nickel Plug
¼" Plug - Switchcraft, Mono, 2-conductor, heavy-duty jumbo
Switchcraft Type 188 Jumbo Plug. ¼" Mono 2 Conductor Heavy Duty Cable Mount Plug - Nickel Finish.
¼" Jack - Neutrik, Switched, Chrome Nut, Straight PC
1/4" enclosed jack, switched, with chrome ferrule and straight PCB pins, mounting nut included. Wide body and extremely durable contacts.
Starting at $1.40
¼" Jack - Switchcraft, Mono, Open Circuit, Gold Plated
Genuine Switchcraft Type 11 ¼” jack with complete gold plating. All metal parts are gold plated including the washer and nut.
¼" Jack - Dunlop, Stereo, for effects pedals
Stereo jack for Dunlop effects pedals. Original Dunlop replacement part. Though hole PCB mount with six pins.
XLR Jack - Switchcraft, premium, circular panel-mount
C Series Circular Panel Mount 3 Pin XLR Female, mounts with #5 Screws (Not included) - Silver Pins / Nickel Finish.
Starting at $8.35
¼" Jack - Switchcraft, Mono, isolated break circuit
Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.
¼" Plug - Neutrik, nickel body, nickel contacts
1/4" professional phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Starting at $3.65
XLR Plug - Switchcraft, premium, cable-mount
Switchcraft XLR 3-Pin Cable Mount Plug (Type A3F) Nickel body. Silver contacts. Latchlock. The original A Series premium XLR connector with adjustable dual pressure plate cable clamp, flexible strain relief, and removable pin insert. Cable-mount with silver pins. Nickel. Provides secure cable lock and strain relief for all standard size cables. Specifications Construction Sturdy, die-cast zinc with satin nickel finish to withstand hard use - even abuse. Insert Insulation High-impact, molded thermoplastic provides high dielectric strength, and superior insulation resistance. Locking Latchlock on female plugs and receptacles locks into groove in mating male connector to prevent accidental disconnect.
Starting at $4.35
¼" Plug - Neutrik, Right-angle, nickel body, nickel contacts
1/4" professional right-angle phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
Starting at $4.95
Speaker Twist Plug - Neutrik, speakON, 2-Pole, Strain Relief
2 pole cable connector, chuck type strain relief. Mates with W-SO-J21 The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination. Features:
- Current rating 40 A continuous, 50 A audio signal with 50% duty cycle
- Only 3 parts, easy to assemble
- High impact materials – long-lasting and reliable
- Easy and extremely precise locking system "Quick Lock"
- 1 piece strain relief, chuck for 6 to 10 mm cable O.D.
- Improved grip on latch
- Mates with 4-pole chassis connector W-SO-J41 as well and makes contact with +1/-1
Speaker Twist Jack - Neutrik, speakON, 2-pole, panel mount
2 pole chassis connector, black D-size flange, countersunk thruholes, 3/16" flat tabs. Does not intermate with the 4-pole cable connector. Mates with W-SO-P22 The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate. Features
- Current rating 30 A rms
- Glass reinforced materials make it extremely robust and dependable
- Precise keyway for secure mating
- Accurate twist lock latching system
- Metal insert in locking area
- Airtight design - optimized for speaker applications