Jack - Cliff, 1/4", solder lugs, switched

Cliff
Pictured: Mono
Pictured: Mono
Pictured: Mono
Pictured: Mono
Pictured: Mono
Pictured: Mono
Pictured: Stereo
Pictured: Stereo
Click to zoom in
Jack - Cliff, 1/4", solder lugs, switched image 1Jack - Cliff, 1/4", solder lugs, switched image 2Jack - Cliff, 1/4", solder lugs, switched image 3Jack - Cliff, 1/4", solder lugs, switched image 4
Customer Images:
No Images yet! Submit a product image below!

Jack - Cliff, 1/4", solder lugs, switched

Starting at: $1.95
In stock

Solder terminals, switched. Used in modern Marshall amps.

For white version, see S-H951-X

Features:

  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • Tough, molded grade 1 black Nylon body.
  • Made in the U.K.
  • Supplied with a black nylon hexagonal mounting nut
  • Designed to receive both mono and stereo ¼" jack plugs
Withstand Voltage: 2000VDC Min.
Maximum Current: 5A
Temperature Rating: -10°C ~ +70°C
Life (Minimum): 10,000+ Operations
Nominal Contact Resistance: < 50 mΩ
RoHS Compliant
SKU:
S-H902-X
Item ID:
005157
Brand:
Cliff
Replacement Type:
Part Numbers
ChannelOur Part NumberUPC/EAN
MonoS-H902609722143431
StereoS-H905609722143493
Product Measurements
Current, maximum5 A
Item Height23.0 mm
Item Length22.8 mm
Item Width20.1 mm
Life, minimum≥ 10,000 operations
Nominal Contact Resistance< 50 mΩ
Nut Diameter11.3 mm
Temperature Rating-10°C ~ 70°C
Withstand Voltage2,000 VDC per minute
Packaging Information
Packaging DimensionsMono version1.309 in. × 0.775 in. × 0.963 in.
Stereo version0.774 in. × 0.936 in. × 1.324 in.
Weight (Packaging)Mono version0.012 lbs.
Stereo version0.014 lbs.

My Project Lists

You must be logged in to add items to a project list.

Questions and Answers

Click each question to see its answers.
Asked by Anonymous on October 13th, 2016.
Anonymous
October 13th, 2016
If you need a mono Marshall style jack, this should work. I would pull one of the jacks out of your cab to make sure it has the same 4 lug pattern.
Asked by Anonymous on April 9th, 2017.
Anonymous
April 12th, 2017
It very well could work for your Marshall but we are not 100% sure. The best thing to do is remove the jack in question and do a visual examination to make sure it has the same 4 lug pattern.
Asked by Anonymous on May 25th, 2017.
Anonymous
May 25th, 2017
It should work but the best thing to do is remove the jack in question and do a visual examination to make sure it has the same 4 lug pattern.
Asked by Anonymous on June 6th, 2017.
Anonymous
June 6th, 2017
It is really hard for us to determine if these are going to be compatible with the circuit you are working on. The best thing to do is compare the dimensions in the spec sheet attached above with your jack. If the terminal legs are too big then they may not fit on your board.

Product Reviews

No product reviews yet! Be the first!
Don't see what you're looking for? Send us your product suggestions!