You are here

2018 Holiday Sale

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(35 pages)
K-MOD103Effects Kit - MOD® Kits, The Wave, Spring Reverb
The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank.

The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).
$275.00
$242.00
You save: 12%
Click to read more
K-MOD102-PLUSAmp Kit - MOD® Kits, MOD102+ guitar amp

The MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with some much added special “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.


$265.00
$233.20
You save: 12%
Click to read more
K-MOD102Amp Kit - MOD® Kits, MOD102 guitar amplifier

MOD 102 Guitar Amp Kit Features:



  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 5W output power into 8 Ohm
  • 1 channel
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • Output Impedance: 8 Ohm
  • Tubes included: one 12AX7 (preamp), one EL84 (JJ Electronic brand)
  • Hammond Mfg 269EX power transformer and P-T31 single ended output transformer
  • Cathode biased class

$215.00
$189.20
You save: 12%
Click to read more
P-GB16-ABVibrato/Bridge - Bigsby, B16, for Telecaster guitars, aluminum

Bigsby B16 Specifications



  • Model Name: B-16
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Sand Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 333 grams/ 11.7 oz.
  • Overall Length: 8 3/8"/ 212.7 mm
  • Overall Width: 4 1/4"/107.9 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench


*Designed for use on Telecaster ® style guitars Bigsby Part No: 0495-B16B


$207.82
$182.88
You save: 12%
Click to read more
P-GB7-A-LHVibrato - Bigsby, B7 Aluminum, for Solid Bodies, Left-Handed

Designed for use on arch top electric guitars. The Bigsby was the first successful design of what is now called a whammy bar or tremolo arm, although vibrato is the technically correct term for the musical effect it produces. In standard usage, tremolo is a rapid fluctuation of the volume of a note, while vibrato is a fluctuation in pitch. The origin of this nonstandard usage of the term by electric guitarists is attributed to Leo Fender, who also used the term “vibrato” to refer to what is really a tremolo effect.



  • Model Name: B-7
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 354 grams/12.5 oz.
  • Overall Length: 8 3/4”/222.3 mm
  • Overall Width: 3 5/8”/92.1 mm
  • Arm adjusts with 1/8” Allen wrench and 5/16” socket wrench


Bigsby Part No: 0495-B7LH


$175.95
$154.84
You save: 12%
Click to read more
P-GB5-A-LHVibrato - Bigsby, B5 Aluminum, for Solid Bodies, Left-Handed
The B5, sometimes referred as the Bigsby “horseshoe” is designed for flat top solid body guitars. Attaching via four screws to a guitar’s top, the B5 is extremely versatile. B5s are common on many styles of guitars including SGs, Les Paul Jrs, Telecasters, and Rickenbacker 325s. Left-handed version.

  • Model Name: B-5
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Cast
  • Manufacturing Material: Aluminum
  • Approximate Weight: 287 Grams/10.1 oz.
  • Overall Length: 4 3/4”/120.65mm
  • Overall Width: 3 3/4”/95.3mm


Bigsby Part No: 0495-B5LH
$173.76
$152.91
You save: 12%
Click to read more
P-H879Footswitch - Marshall, 5 Button with LED
Original Marshall Footswitch, Five Button With LED (Clean, Crunch, Lead, Reverb, FX). 6 Pin DIN Plug.
For use with TSL Amps.
$149.95
$127.45
You save: 15%
Click to read more
M-OD9Effects Pedal - Maxon, OD9, Overdrive
Improved circuitry featuring the JRC4558 IC yields the ultra-smooth, creamy, dynamic overdrive so sought after by guitarists.
Overdrive and output level controls adjust the intensity of overdrive and output volume, while the Hi Boost/Hi Cut Tone control adjusts the brightness from warm and smooth to sizzling hot.
While the M-OD808 may have been the first overdrive circuit of its kind, it was the OD-9 that cemented this sound in the history of Rock & Roll guitar. Looking at the OD-9's circuit, you'll realize that this is not some redesign being cleverly marketed as a reissue – this is THE original OD-9 (TS-9) circuit, yet with the addition of true bypass switching.
$159.00
$127.20
You save: 20%
Click to read more
P-GB12-AVibrato - Bigsby, B12, for Arch Top Electric guitars, Aluminum
Bigsby B16 Specifications
  • Model Name: B-12
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Sand Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 344 grams/12.1 oz.
  • Overall Length: 8 3/8" / 212.7 mm
  • Overall Width: 3 5/8" / 92.1 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench
*Designed for use on arched top electric guitars
Bigsby Part No: 0495-B12
$142.96
$125.80
You save: 12%
Click to read more
P-GGT-36-GTuner - Gotoh, 4/Line, Gold, for Pre-CBS Fender Bass

The Gotoh® RES-O-LITE Series tuning machines are made to pre-CBS Fender® specs and mounting pattern. Their special lightweight alloy helps reduce headstock weight without sacrificing supreme tone. Vintage style set of 4 in line tuning machines. Reverse wind. Mounting hardware included.


$155.00
$124.00
You save: 20%
Click to read more

Pages

(35 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - 2018 Holiday Sale