Hardware

S-H130 Screws - Original Fender, Vintage Speaker Mounting Stud / Nut
Package of 12
Original Fender speaker mounting stud/nut set. These speaker mounting studs were used on countless amps of the 50’s, 60’s 70’s and beyond. The reverse thread section screws into the baffle wood and the machine screw section holds the speaker in place using the included keps nuts.
  • Used on early ’50s and ’60s vintage amplifiers
  • Fits most vintage and modern amplifiers
  • 1” of 8-32 machine head thread
  • ¼” of reverse wood thread
  • 1-½” overall length
  • 8-32 keps nuts included
  • Set of 12
$8.95
P-H264 Screw - 8-32 x 3.25", for Chassis Straps
#8-32 x 3 ¼" chassis strap screw. Single piece.
$2.00
S-H105 Screw - 1", Phillips, Pan Head, Matching T-Nut
Package of 4
1" panhead, Phillips screw with matching t-nut. (package of 4)
$1.40
S-HTNX Nut - T-Nut, Zinc, for fastening metal to wood or plastic
Package of 5
Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.00
S-HMR-XS Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
S-H11X Solder Lug - #6 or #8 Hole, Locking
Package of 10
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.50
S-HRVNT Nut - Fender, Hex Type, for Potentiometers
Package of 12
Hex nut for Fender® pots. Package of 12.
$4.25
S-H103 Screw - #4 x ½", Oval Head, Sheet Metal, Black Oxide
Package of 25
Black screws for attaching logos and other lightweight items. #4 x 1/2" sheet metal/wood screws, oval head, black oxide finish. Package of 25.
$3.00
S-HLWX Washer - Internal Tooth Lock, spring steel
Package of 5
Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Starting at $0.45
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Package of 5
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.75
P-GTS-100X Screw - Pickguard, Package of 100
Package of 100
Colors Available:
Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.
  • 7/16” threaded portion
  • Available in Black, Gold, Nickel, and Chrome plating
  • Package of 100
Starting at $5.60
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.50
S-HSM6-1X30 Screw - M6-1.0 x 30mm, Phillips, Pan Head, Zinc, coarse thread
Package of 5
Phillips pan head machine screw, 1 x 30. Designed to go through a pre-tapped hole or nut to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.75
S-HM300N Nut - Marshall, for S-HM301 Toggle Switch, Chrome
Chrome slotted nut for part S-HM301 toggle switch.
  • Thread size = 15/32 - 32 thread pitch
$3.50
S-HHNX Nut - Hex finished, fine thread, zinc
Package of 5
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
$0.30
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
S-HS632-X Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.40
P-H249 Clip Nut - 8/32
Package of 4
Clip nut for 8/32" thread. For use with P-H248 Machine screws
$0.80
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.35
P-H200X Washer - 0.25" Inside Diameter, Felt
Package of 5
Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.95
P-GTS-KIT-2 Guitar Screw Kit - Vintage, Shop in a Box
Package of 595
A must for anyone out there with Pre-CBS Fender® guitars and basses. Look no further. You can finally replace those old rusty, stripped out screws with correct new ones that look and are just like the originals. We went to special efforts to have these rare and unusual screws made for use specially, so you can keep that vintage Fender® in primo condition. This assortment contains 595 pieces and comes with a traditional, free, pre-labeled cabinet for easy access and reordering. This Kit contains:
  • 100 Bass/Tele saddle height nickel screws
  • 150 Long Strat saddle height nickel screws
  • 75 Vintage Bass nickel intonation screws
  • 75 Short Strat saddle height nickel screws
  • 120 Vintage tremelo intonation nickel screws
  • 75 Vintage Tele intonation nickel screws
$78.00
P-H1309 Bumper - Button, ~\frac{7}{16}~" Diameter x ~\frac{5}{16}~" High
Package of 4
Button bumpers help reduce unwanted vibrations on your equipment. (Package of 4). Overall Height = 5/8” Flange OD = 7/16” Flange Height = 5/16” Button OD = 5/16” Grommet Width = 3/64” Grommet Diameter = 1/4”
$0.11
Save 73%
Originally: $0.40
S-H401 Washer - C, Assortment
Package of 25
Oneida brand. Contains 25 of the most popular sizes generally used in Record Changers, Tape Recorders, etc. Use on Turn Tables, Drive Wheels, Idler Wheels, etc.
$0.49
Save 11%
Originally: $0.55
S-H408 Nut - Wire nut, Small
Package of 12
Small wire nuts, for use on appliances, televisions, stereos and antennas, package of twelve.
$0.20
Don't see what you're looking for? Send us your product suggestions!