Hardware

S-H8FW Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
S-T304 Magnetic Parts Tray - Dunlop, System 65
Keep all of your parts in one place with this magnetic tray. 4” diameter across the top rim and 2.5” diameter on the base.
$9.85
S-HKEP-X Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10
Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.00
S-H514 Nut & Washer - Panel, for Fender / Marshall Jacks
Package of 5
M12 x1.0 thread. Package of 5.
$1.50
S-H111 Nut - Hex, for Carling switches, ~\frac{15}{32}~"
Hex nut for Carling switches, 15/32". Sold individually.
$0.35
S-H9FER Ferrule - for Cliff UK Jacks, Chrome
Ferrule for internal thread jacks, chrome (3/8-20).
$0.50
S-H109 Bolt - Fender®, micro tilt adjustment for 3-bolt neck plate
MicroTilt disk bolt, 1/4-28 x 1916". Genuine Fender® 3 bolt neck micro tilt adjust mounting bolt. This bolt goes in the lower location in the Fender 3-bolt neck plate. This bolt is secures your neck angle adjustment once you have made your neck tilt angle change with the set screw.
$3.25
P-H264-NUT Nut - 8-32, Keps with external tooth, zinc
Package of 10
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.00
R-VM-NUT-2 Nut - M8x0.75 hex, for potentiometers / switches / jacks
Package of 5
M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
$1.25
S-HFW Washer - Flat Fiber
Package of 5
Fiber Flat Washer Outer Diameter = 0.625" Inner Diameter = 0.385" sold in packages of 5
$0.30
Save 33%
Originally: $0.45
S-HSW Washer - Fiber Shoulder
Package of 5
Fiber Shoulder Washer Overall Outer Diameter = 0.625" Center Hole Diameter = 0.385" sold in packages of 5
$1.00
S-H401 Washer - C, Assortment
Package of 25
Oneida brand. Contains 25 of the most popular sizes generally used in Record Changers, Tape Recorders, etc. Use on Turn Tables, Drive Wheels, Idler Wheels, etc.
$0.49
Save 11%
Originally: $0.55
S-H408 Nut - Wire nut, Small
Package of 12
Small wire nuts, for use on appliances, televisions, stereos and antennas, package of twelve.
$0.20
S-H9NT Nut - Cliff, Hex, for Jacks
Nut - Hex, for Cliff UK Jacks S-H902, S-H903, S-H904, & S-H905
$0.50
S-H9NT-W Nut - Cliff, Hex, for white Jacks
Hex nut for white Cliff Jacks, threading: 7/16-20
$0.50
S-HWX Washer - Type A Narrow, Flat, steel
Package of 5
Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.
Starting at $0.45
W-SC-W09 Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated)
Outside Diameter:5/8"
Inside diameter threading:15/32"
Width: 3/32"
$1.20
S-H11X Solder Lug - #6 or #8 Hole, Locking
Package of 10
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.50
S-H510 Nut - Fender®, Hex, for Rean Jacks
Package of 12
Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks
$4.60
S-HHNX Nut - Hex finished, fine thread, zinc
Package of 5
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
$0.30
S-HLWX Washer - Internal Tooth Lock, spring steel
Package of 5
Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Starting at $0.45
S-HM300N Nut - Marshall, for S-HM301 Toggle Switch, Chrome
Chrome slotted nut for part S-HM301 toggle switch.
  • Thread size = 15/32 - 32 thread pitch
$3.50
S-HRVLW Washer - Fender®, Lock Type, for Potentiometers
Package of 12
Lock washer for Fender® pots. Package of 12.
$4.25
S-HRVNT Nut - Fender, Hex Type, for Potentiometers
Package of 12
Hex nut for Fender® pots. Package of 12.
$4.25
Don't see what you're looking for? Send us your product suggestions!