Hardware

S-HST6-112 Screw - #6, 1 ½", Self-Tapping, Phillips Pan Head, Zinc
#6 x 1 ½” zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.15
S-HS632-X Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.40
P-H248-P Screw - 8-32, #12 Reverse Thread, Speaker Baffle Mount
Package of 4
High-quality 8/32 machine screws with #12 reverse wood screw threading at the head. These screws are a simple solution for mounting speakers to baffle boards and were commonly used on many vintage amplifiers. Nuts sold separately.
$0.45
S-HST6-38 Screw - #6, ⅜", Self-Tapping, Phillips Pan Head, Zinc
Package of 5
#6 x 3/8 zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.50
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
Starting at $0.65
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.75
S-HS-M3-X Screw - M3, Phillips, Pan Head, Machine
Package of 5
Phillips panhead machine screw, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
See S-HS-M3-6-X for colored 6mm M3 screws.
Starting at $0.75
S-HS-BTN-X Screws - M3-0.5 Button-Head Socket Cap, 8mm Long
Package of 5
Colors Available:
Button-Head Socket Cap Screws - Class 10.9, ISO 7380 Coarse Thread. Used when a wider bearing surface or smoother, more finished appearance is desired.
Starting at $0.75
S-HS-SKT-X Screws - M3-0.5 Socket Head Cap, 8mm Length
Package of 5
Colors Available:
Ideal for precision assembly work with close tolerances and applications needing a well tooled appearance.
Starting at $0.75
P-H1590MS-X Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Package of 4
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
$0.79
S-HSM4D7-20 Screw - M4 x 0.70, Phillips, Pan Head, Stainless Steel, Machine
Package of 4
Metric Threading: M4 x 0.70 - 20 mm long pan head machine screws. Stainless steel.
$0.80
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Package of 5
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.95
S-H100 Screw - 1", Flat top Phillips, Stainless Steel
Package of 4
1" stainless steel Phillips head, flat top screw.
$1.40
S-HS1032-1F Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Package of 5
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
$1.50
P-ECB-590 Screws - Dunlop, MXR, housing screws, package of 4
Package of 4
Genuine Dunlop replacement housing screws for MXR/ Dunlop pedals. Replace lost screws and keep your battery access plate on tight. 6-32 thread, Phillips head.
$1.55
S-HSM6-1X30 Screw - M6-1.0 x 30mm, Phillips, Pan Head, Zinc, coarse thread
Package of 5
Phillips pan head machine screw, 1 x 30. Designed to go through a pre-tapped hole or nut to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.75
S-HS-5D5C-N Screw - M3, Nickel, Combination Head, Binding, 6mm
Package of 5
Combination Drive, Nickel, 6mm, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.75
S-HS-M3-6-X Screw - M3, Painted, Combination Head, Binding, 6mm
Package of 5
Colors Available:
Combination Drive, Colored Head Binding Screws, 6mm, M3, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.75
S-H105 Screw - 1", Phillips, Oval Head, Matching T-Nut
Package of 4
1" Oval head, Phillips screw with matching t-nut. (package of 4)
$1.95
S-H102 Screw - #6 x ¾", Flat Head, Stainless Steel
Package of 8
Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
$2.00
P-GB-SCREW-1X Screw - Bigsby, Regular #125, Hinge
Colors Available:
Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.
Starting at $2.15
P-H264 Screw - #8-32 x 3.25", for Chassis Straps
#8-32 x 3 ¼" chassis strap screw. Single piece.
$2.25
P-GB-SCREW-4 Screw - Bigsby, for Mounting Bridge Plates
Genuine Bigsby® mounting screws. These wood screws are for mounting bridge plates to the top of the guitar body. These are the stock screws included with plates like P-GB-PLATE.
$2.25
Don't see what you're looking for? Send us your product suggestions!