Hardware

S-HST6-112 Screw - #6, 1 ½", Self-Tapping, Phillips Pan Head, Zinc
#6 x 1 ½” zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.25
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.59
package of 5
S-HS632-X Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.65
package of 5
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
Starting at $0.72
package of 5
S-HST6-38 Screw - #6, ⅜", Self-Tapping, Phillips Pan Head, Zinc
#6 x 3/8 zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.95
package of 5
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $1.15
package of 5
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.15
package of 5
S-HPOH6-X Screw - #6, Phillips, Oval Head, Wood, Nickel-plated
#6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.
Starting at $1.25
package of 4
S-HPOH4-12 Screw - #4 x ½”, Phillips, Oval Head, Sheet Metal, Nickel-plated
#4 x ½” Phillips drive sheet metal screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® pickguards, tremolo covers, and some bridge covers.
$1.25
package of 5
P-H1590MS-X Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
Starting at $1.35
package of 4
S-HPO632-58 Screw - 6-32 x ⅝”, Phillips, Oval Head, Machine, Nickel-plated
#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of oval head screw matches the pickup and switch mounting screws found on Fender® guitars with countersunk holes on the pickguard.
$1.45
package of 5
S-H100 Screw - 1", Flat top Phillips, Stainless Steel
1" stainless steel Phillips head, flat top screw.
$1.45
package of 4
S-HPOH3-38 Screw - #3 x ⅜”, Phillips, Oval Head, Wood, Nickel-plated
#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.
$1.59
package of 5
S-HFS8-34 Screw - #8 x ¾”, Phillips, Flat Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws. These flat head #8 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for RCA reverb tank cables used in vintage Fender® blackface and silverface combo amps. For the larger #10 screws often used with power cables, see S-HFS10-34.
$1.59
package of 5
S-HSB4-X Screw - 4-40, Phillips, Round Head, Machine, Brass
4-40 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 4-40 size works in place of original M3 screws that were used for the AC inlet, noval sockets, PCB and turret board standoffs, and the P-H1700 and S-HM100-A rotary selectors. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. Use with S-ASP4-X spacers for board standoffs. S-HBWX flat washers are also available.
Starting at $1.59
package of 5
S-HSOH6-1 Screw - #6 x 1”, Slotted, Oval Head, Wood, Nickel-plated
#6 x 1” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Fender® tweed amps to secure the back panels. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$1.75
package of 4
S-HPRH3-14 Screw - #3 x ¼”, Phillips, Round Head, Wood, Nickel-plated
#3 x ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Gibson® truss rod covers.
$1.79
package of 5
S-HSOH4-12 Screw - #4 x ½”, Slotted, Oval Head, Wood, Nickel-plated
#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.
$1.79
package of 5
S-HRS6-114 Screw - #6-32 x 1 ¼” Rosette Head, Machine, Bronze-plated
#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.
$1.89
package of 4
S-HBS8-38 Screw - #8 x 3/8”, Phillips, Pan Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws with blunt tips. These pan head #8 screws have a length of 3/8” and are commonly used to secure the fiberboard, capacitor pan, and other hardware to the chassis of blackface and silverface amps. For the smaller #6 blunt tip machine screws found in vintage Fender® amps, see S-HBS6-516.
$1.89
package of 5
S-HRS8-1116 Screw - #8-32 x 1-1/16” Rosette Head, Machine, Brass-plated
#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.
$1.89
package of 4
S-HFS10-34 Screw - #10 x ¾”, Phillips, Flat Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws. These flat head #10 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for AC power cables used in vintage Fender® blackface and silverface combo amps. For the smaller #8 screws often used with reverb cables, see S-HFS8-34.
$1.95
package of 5
S-H105 Screw - 1", Phillips, Oval Head, Matching T-Nut
1" Oval head, Phillips screw with matching t-nut. (package of 4)
$1.99
package of 4
S-HPRH4-114 Screw - #4 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
#4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.
$2.15
package of 5
Don't see what you're looking for? Send us your product suggestions!