Hardware

S-HST6-112 Screw - #6, 1 ½", Self-Tapping, Phillips Pan Head, Zinc
#6 x 1 ½” zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.15
R-VNUT-M7 Nut & Washer - for M7x0.75 Potentiometers
Replacement nut for Marshall style pots with 7mm bushing. Sold individually
$0.25
S-HHNX Nut - Hex finished, fine thread, zinc
Package of 5
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
Starting at $0.30
S-H111 Nut - Hex, for Carling switches, ~\frac{15}{32}~"
Hex nut for Carling switches, 15/32". Sold individually.
$0.40
S-HWX Washer - Type A Narrow, Flat, steel
Package of 5
Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.
Starting at $0.45
W-SC-S1028 Washer - Switchcraft, S1028, flat for insulating panels
Switchcraft (brown) rigid plastic washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1029.
$0.48
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.50
S-HST6-38 Screw - #6, ⅜", Self-Tapping, Phillips Pan Head, Zinc
Package of 5
#6 x 3/8 zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
R-VC-NUT Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
Replacement nut for CTS 450 series potentiometers and others.
  • 3/8-32 threading
  • Sold individually
$0.55
S-HSO-M3-X Standoff - M3, Male-Female, Aluminum, 5.5mm Diameter
  • Finish/Plating: Clear Iridite
  • Material: Aluminum
  • OD: 5.5mm
  • Shape: Hex (Metric)
  • Style: M-F Standoff
  • Thread Depth(D): 8mm
  • Thread Length (TL): 8mm
  • Thread: M3
  • Type: Threaded Standoffs
Starting at $0.60
S-HLWX Washer - Internal Tooth Lock, spring steel
Package of 5
Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Starting at $0.60
S-HNUT-38X Finishing Nut - For ⅜” Jacks and Pots, ⅜”-32 UNEF-2A
Package of 5
Colors Available:
High quality plated ⅜” nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The ⅜”-32 UNEF-2A threading fits many ⅜” bushing parts such as Switchcraft ¼” jacks and CTS pots.
Starting at $0.64
S-HS632-X Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.65
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
Starting at $0.72
S-HCN1032 Nut - Cage, Zinc, 10-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.75
W-SC-S1029 Washer - Switchcraft, S1029, shoulder for insulating panels
Switchcraft shoulder washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1028. Minimum chassis hole diameter of 0.44” required to accommodate the shoulder.
$0.75
S-HS-SKT-X Screws - M3-0.5 Socket Head Cap, 8mm Length
Package of 5
Colors Available:
Ideal for precision assembly work with close tolerances and applications needing a well tooled appearance.
Starting at $0.75
S-HCN832 Nut - Cage, Zinc, 8-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 8-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
$0.75
S-HS-M3-X Screw - M3, Phillips, Pan Head, Machine
Package of 5
Phillips panhead machine screw, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
See S-HS-M3-6-X for colored 6mm M3 screws.
Starting at $0.75
R-VKG-NUT Nut - for Marshall, Hex Type, M9, for Potentiometers
Package of 5
Replacement nut for Marshall snap in style pots with M9 bushing.
$0.75
R-VNUT-38 Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
$0.75
S-HS-BTN-X Screws - M3-0.5 Button-Head Socket Cap, 8mm Long
Package of 5
Colors Available:
Button-Head Socket Cap Screws - Class 10.9, ISO 7380 Coarse Thread. Used when a wider bearing surface or smoother, more finished appearance is desired.
Starting at $0.75
W-BNUT-X Dress Nut - Befaco, Bananuts, for 3.5mm Jacks
Colors Available:
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code: blue, purple, red, orange, yellow, white, green and black. These nuts are great for color-coding jacks or color-theming modules. Sold individually.
$0.79
W-BNUTL-BK Dress Nut - Befaco, Bananuts, for M7 Pots
Larger threaded black Bananuts for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs.
$0.79
Don't see what you're looking for? Send us your product suggestions!