Hardware

S-H510 Nut - Fender®, Hex, for Rean Jacks
Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated
Used with many Fender amplifier jacks
Used on Acoustasonic™ Pro, Acoustasonic™ 30/30 DSP, Pro Tube Series, Showman 50, Bassman® 60/100/200/300/1200, Super-Sonic™ series, Cyber-Champ, Cyber-Twin, Cyber-Twin SE, Cyber Deluxe® Bullet 15, Princeton® 65 DSP, Deluxe™ 90 DSP, Stage™ 100/160 DSP, 400 Pro, Hot Rod Deluxe™/DeVille™, MH-500™, Blues Deluxe™/DeVille™ and Machete™ amplifiers (1994-present)
$4.60
S-HRVLW Washer - Fender®, Lock Type, for Potentiometers
Lock washer for Fender® pots. Package of 12.
$4.25
S-HRVNT Nut - Fender, Hex Type, for Potentiometers
Hex nut for Fender® pots.
Package of 12.
$4.25
S-HM300N Nut - Marshall, for S-HM301 Toggle Switch, Chrome
Chrome slotted nut for part S-HM301 toggle switch.
  • Thread size = 15/32 - 32 thread pitch
$3.50
P-H200X Washer - 0.25" Inside Diameter, Felt
(Package of 5)
Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.95
S-HLW-CARLING Locking Washer - Carling
(Package of 5)
Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).
$1.50
S-H514 Nut & Washer - Panel, for Fender/Marshall Jacks
(Package of 5)
M12 x1.0 thread. Package of 5.
$1.50
R-VM-NUT-2 Nut - M8x0.75
(Package of 5)
Nut - M8 x 0.75
$1.25
R-VC-FLATWASHER Washer - CTS, Flat, for Potentiometers
(Package of 10)
Flat washer for 3/8" bushing. Perfect fit for CTS potentiometers. Package of 10.
$1.25
S-HTNX Nut - T-Nut, Zinc
(Package of 5)
Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.00
S-HSW Washer - Fiber Shoulder
(Package of 5)
Fiber Shoulder Washer Overall Outer Diameter = 0.625" Center Hole Diameter = 0.385" sold in packages of 5
$1.00
P-H264-NUT Nut - 8-32x3.25, Keps, Zinc
(Package of 10)
Nut - Keps, Zinc, fits Screws for Chassis Straps, 8-32 X 3 1/4, package of 10
$1.00
S-HKEP-X Nut - Kep, Zinc, Package of 10
(Package of 10)
Package of 10 Zinc Kep nuts. Available in multiple diameters.
$1.00
S-H8FW Finishing Washer - #8, Blackface/Silverface, Nickel Plated Steel
(Package of 10)
Pack of 10 nickel plated steel finishing washers. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
W-SC-W09 Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated)
Outside Diameter:5/8"
Inside diameter threading:15/32"
Width: 3/32"
$0.95
R-VNUT-38 Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
$0.70
S-HCN1032 Nut - Cage, Zinc, ~\frac{10}{32}~, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.65
P-SH2-104-2 Washer - Wavy
Works with P-ST8-810 for mounting without screws.
$0.60
W-SC-S1029 Washer - Switchcraft, S1029
Switchcraft shoulder washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1028. Minimum chassis hole diameter of 0.44” required to accommodate the shoulder.
$0.60
S-HCN1024 Nut - Cage, Zinc, ~\frac{10}{24}~, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-24 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.60
S-HCN832 Nut - Cage, Zinc, ~\frac{8}{32}~, Electroplate Panel Range .064-.105, Each
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 8-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
$0.60
S-H9NT Nut - Cliff, Hex, for Jacks
Nut - Hex, for Cliff UK Jacks S-H902, S-H903, S-H904, & S-H905
$0.50
S-H9NT-W Nut - Cliff, Hex, for white Jacks
Hex nut for white Cliff Jacks, threading: 7/16-20
$0.50
S-H401 Washer - C, Assortment
Oneida brand. Contains 25 of the most popular sizes generally used in Record Changers, Tape Recorders, etc. Use on Turn Tables, Drive Wheels, Idler Wheels, etc.
$0.49
Save 11%
Originally: $0.55
Don't see what you're looking for? Send us your product suggestions!