Hardware

R-VNUT-38-M Nut & Washer - Panel, for ⅜" Potentiometers and Jacks
Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.
$25.00
package of 100
P-H54-NUT-HEX Nut - Hex Nut, For Mini Toggle Switches
Hex nuts for use with mini toggle switches. These nickel plated dress nuts work on any 1/4-40 UNS threaded bushing. These are the same as the stock nuts included with Carling mini toggle switches.
$1.95
package of 5
W-SC-W09 Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated) Outside Diameter:5/8" Inside diameter threading:15/32" Width: 3/32"
$1.79
P-H52-DRESS-WIDE Nut - Wide Dress Nut, Threaded Through, 15/32-32UNS
Wide dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a wide chamfered edge that pairs nicely with smaller dress nuts such as P-H54-DRESS-WIDE, P-H54-DRESS-THRU, and P-H54-NUT-DRESS. These nuts are threaded through and fit any 15/32-32UNS bushing such as Carling footswitches and full sized toggles.
$1.75
P-H52-NUT-DRESSX Nut - Large Dress Nut, Carling, 15/32-32UNS
Colors Available:
Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.
$1.29
P-H264-NUT Nut - 8-32, Keps with external tooth, zinc
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.25
package of 10
S-HKEP-X Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Starting at $1.20
package of 10
S-HTNX Nut - T-Nut, Zinc, for fastening metal to wood or plastic
Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.15
package of 5
S-HBNX Nut - Hex, Brass, Imperial Thread
Imperial threaded hex nuts made of solid brass. These brass hex nuts visually match the nuts found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. These will also work well in many other types of projects. Pairs with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws. S-HLWX-B lock washers and S-HBWX flat washers are also available.
Starting at $1.09
package of 5
W-SC-NUT38-K Nut - Switchcraft, Knurled Nut, 3/8”-32
Genuine Switchcraft ⅜” knurled nut commonly used on ¼” jacks. This nickel plated knurled nut has a ⅜”-32 threading and offers a clean look on builds using these nuts. The ⅜”-32 threading fits other hardware with matching threading such as CTS potentiometers.
$0.99
S-HCN1024 Nut - Cage, Zinc, 10-24, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-24 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.95
S-HHN-X-SS Nut - Hex, Stainless Steel, Imperial Thread
Imperial threaded hex nuts made of 18-8 stainless steel. Hex nuts like these can be found in countless pieces of equipment such as Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.
$0.89
package of 5
S-HCN1032 Nut - Cage, Zinc, 10-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.85
S-HCN832 Nut - Cage, Zinc, 8-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 8-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
$0.75
R-VNUT-38 Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
$0.75
S-HNUT-38X Finishing Nut - For ⅜” Jacks and Pots, ⅜”-32 UNEF-2A
Colors Available:
High quality plated ⅜” nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The ⅜”-32 UNEF-2A threading fits many ⅜” bushing parts such as Switchcraft ¼” jacks and CTS pots.
Starting at $0.64
package of 5
R-VC-NUT Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
Replacement nut for CTS 450 series potentiometers and others.
  • 3/8-32 threading
  • Sold individually
$0.55
S-H111 Nut - Hex, for Carling switches, ~\frac{15}{32}~"
Hex nut for Carling switches, 15/32". Sold individually.
$0.40
S-HHNX Nut - Hex finished, fine thread, zinc
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
Starting at $0.30
package of 5
Don't see what you're looking for? Send us your product suggestions!