Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Nut - 8-32, Keps with external tooth, zinc
Package of 10Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
Nut & Washer - Panel, for ⅜" Potentiometers and Jacks
Package of 100Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.
Nut & Washer - Panel, for Fender / Marshall Jacks
Package of 5M12 x1.0 threading. Nut and washer set for panel-mounting jacks.
Nut - M8x0.75 hex, for potentiometers / switches / jacks
Package of 5M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
Wire Nut - 18-22AWG, 300V, Rated for 105°C
Package of 20300V wire nuts for use with 18 gauge through 22 gauge wires. These wire nuts are great for use on appliances, televisions, stereos, antennas, or for any small wiring application. Rated for up to 105°C.
Nut - T-Nut, Zinc, for fastening metal to wood or plastic
Package of 5Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.15
Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
Nut - Hex finished, fine thread, zinc
Package of 5Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
Nut - Cliff, Hex, for mounting ¼" Jacks
Nut - Hex, for Cliff UK Jacks S-H902, S-H903, S-H904, & S-H905
Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
Replacement nut for CTS 450 series potentiometers and others.
- 3/8-32 threading
- Sold individually
Nut - Marshall, for S-HM301 Toggle Switch, Chrome
Chrome slotted nut for part S-HM301 toggle switch.
- Thread size = 15/32 - 32 thread pitch
Nut - for Marshall, Hex Type, M9, for Potentiometers
Package of 5Replacement nut for Marshall snap in style pots with M9 bushing.
Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
Nut - Cliff, Hex, for ¼" white Jacks
Hex nut for white Cliff Jacks, threading: 7/16-20
Nut - M3-0.5 Hex Nut, Stainless Steel
Package of 5A threaded fastener made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
Nut - Cage, Zinc, 10-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
- 10-32 Threading
- Panel Range .064-.105
- Zinc Finish
- Sold Individually
Nut - Fender, Hex Type, for Potentiometers
Package of 12Hex nut for Fender® potentiometers. Package of 12.
Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated)
Inside diameter threading:15/32"
Inside diameter threading:15/32"
Nut - Fender®, Hex, for Rean Jacks
Package of 12Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks
Nut & Washer - for M7x0.75 Potentiometers
Replacement nut for Marshall style pots with 7mm bushing. Sold individually