Hardware

P-GTS-100X Screw - phillips, for pickguards / control plates
Package of 100
Colors Available:
Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.
  • 7/16” threaded portion
  • Available in Black, Gold, Nickel, and Chrome plating
  • Package of 100
Starting at $5.60
S-H11X Solder Lug - #6 or #8 Hole, Locking
Package of 10
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.50
S-HKEP-X Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10
Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.00
P-H264-NUT Nut - 8-32, Keps with external tooth, zinc
Package of 10
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.00
R-VC-FLATWASHER Washer - CTS, Flat, for Potentiometers
Package of 10
Flat washer for 3/8" bushing. Perfect fit for CTS potentiometers. Package of 10.
$1.25
S-H8FW Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
P-H200X Washer - 0.25" Inside Diameter, Felt
Package of 5
Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.95
S-HLWX Washer - Internal Tooth Lock, spring steel
Package of 5
Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Starting at $0.45
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.35
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.50
S-H170X Standoff - #6-32, Male-Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X
Starting at $2.25
S-H172X Standoffs - #6-32, Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4". For male to female standoffs, see S-H170X
$2.20
S-H514 Nut & Washer - Panel, for Fender / Marshall Jacks
Package of 5
M12 x1.0 thread. Package of 5.
$1.50
S-HWX Washer - Type A Narrow, Flat, steel
Package of 5
Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.
Starting at $0.45
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Package of 5
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.75
R-VM-NUT-2 Nut - M8x0.75 hex, for potentiometers / switches / jacks
Package of 5
M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
$1.25
S-HTNX Nut - T-Nut, Zinc, for fastening metal to wood or plastic
Package of 5
Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.00
S-HLW-CARLING Locking Washer - Carling
Package of 5
Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).
$1.50
S-HSW Washer - Fiber Shoulder, 0.625" outer diameter
Package of 5
Fiber Shoulder Washer Overall Outer Diameter = 0.625" Center Hole Diameter = 0.385" sold in packages of 5
$1.00
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
S-HFW Washer - flat fiber, 0.625" outer diameter
Package of 5
Fiber Flat Washer Outer Diameter = 0.625" Inner Diameter = 0.385"
$0.30
Save 33%
Originally: $0.45
S-HS-M3-X Screw - M3, Phillips, Pan Head, Machine
Package of 5
Phillips panhead machine screw, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
See S-HS-M3-6-X for colored 6mm M3 screws.
Starting at $0.75
S-HST6-38 Screw - #6, ⅜", Self-Tapping, Phillips Pan Head, Zinc
Package of 5
#6 x 3/8 zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
S-H409X Wire Nut - 18-22AWG, 300V, Rated for 105°C
Package of 20
300V wire nuts for use with 18 gauge through 22 gauge wires. These wire nuts are great for use on appliances, televisions, stereos, antennas, or for any small wiring application. Rated for up to 105°C.
$1.40
Don't see what you're looking for? Send us your product suggestions!