Hardware

S-H109 Bolt - Fender®, micro tilt adjustment for 3-bolt neck plate
MicroTilt disk bolt, 1/4-28 x 1916". Genuine Fender® 3 bolt neck micro tilt adjust mounting bolt. This bolt goes in the lower location in the Fender 3-bolt neck plate. This bolt is secures your neck angle adjustment once you have made your neck tilt angle change with the set screw.
$3.25
S-H9FER Ferrule - for Cliff UK Jacks, Chrome
Ferrule for internal thread jacks, chrome (3/8-20).
$0.50
S-H8FW Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
S-SJ-3201 Hedlock Fastener - 4 Sets of 2 Clips
Package of 8
These super sturdy fasteners are great for speaker covers or helping prevent earthquake damage. 4 sets of 2 clips (package of 8).
$0.85
Save 15%
Originally: $1.00
S-HLW-CARLING Locking Washer - Carling
Package of 5
Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).
$1.50
S-T304 Magnetic Parts Tray - Dunlop, System 65
Keep all of your parts in one place with this magnetic tray. 4” diameter across the top rim and 2.5” diameter on the base.
$9.85
R-VNUT-38 Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
$0.70
S-H514 Nut & Washer - Panel, for Fender / Marshall Jacks
Package of 5
M12 x1.0 thread. Package of 5.
$1.50
P-H264-NUT Nut - 8-32, Keps with external tooth, zinc
Package of 10
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.00
S-HCN1024 Nut - Cage, Zinc, ~\frac{10}{24}~, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-24 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.60
S-HCN1032 Nut - Cage, Zinc, ~\frac{10}{32}~, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.65
S-HCN832 Nut - Cage, Zinc, ~\frac{8}{32}~, Electroplate Panel Range .064-.105, Each
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 8-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
$0.60
S-H9NT Nut - Cliff, Hex, for Jacks
Nut - Hex, for Cliff UK Jacks S-H902, S-H903, S-H904, & S-H905
$0.50
S-H9NT-W Nut - Cliff, Hex, for white Jacks
Hex nut for white Cliff Jacks, threading: 7/16-20
$0.50
S-HRVNT Nut - Fender, Hex Type, for Potentiometers
Package of 12
Hex nut for Fender® pots. Package of 12.
$4.25
S-H510 Nut - Fender®, Hex, for Rean Jacks
Package of 12
Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks
$4.60
S-HHNX Nut - Hex finished, fine thread, zinc
Package of 5
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
$0.30
S-H111 Nut - Hex, for Carling switches, ~\frac{15}{32}~"
Hex nut for Carling switches, 15/32". Sold individually.
$0.35
S-HKEP-X Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10
Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.00
R-VM-NUT-2 Nut - M8x0.75 hex, for potentiometers / switches / jacks
Package of 5
M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
$1.25
S-HM300N Nut - Marshall, for S-HM301 Toggle Switch, Chrome
Chrome slotted nut for part S-HM301 toggle switch.
  • Thread size = 15/32 - 32 thread pitch
$3.50
W-SC-W09 Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated)
Outside Diameter:5/8"
Inside diameter threading:15/32"
Width: 3/32"
$1.50
S-HTNX Nut - T-Nut, Zinc, for fastening metal to wood or plastic
Package of 5
Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.00
S-H408 Nut - Wire nut, Small
Package of 12
Small wire nuts, for use on appliances, televisions, stereos and antennas, package of twelve.
$0.20
Don't see what you're looking for? Send us your product suggestions!