Hardware

S-HS1032-1F-SET Hardware - Fender, Screws & T-Nuts for Handle
Package of 5
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$3.00
P-GB-ROLLER-X Roller - Bigsby, for B5, B7, and B12 Vibratos
Colors Available:
Genuine Bigsby® replacement roller for use with vibrato units. This is the stock roller for B5, B7, and B12 vibratos.
Starting at $8.95
S-H104 Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
Package of 25
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$3.00
Save 25%
Originally: $4.00
S-H103 Screw - #4 x ½", Oval Head, Sheet Metal, Black Oxide
Package of 25
Black screws for attaching logos and other lightweight items. #4 x 1/2" sheet metal/wood screws, oval head, black oxide finish. Package of 25.
$3.00
S-H102 Screw - #6 x ¾", Flat Head, Stainless Steel
Package of 8
Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
$2.00
S-H101 Screw - #6 x ¾", Pan Head, Stainless Steel
Package of 12
Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
$2.40
S-HST6-38 Screw - #6, ⅜", Self-Tapping, Phillips Pan Head, Zinc
Package of 5
#6 x 3/8 zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
P-H264 Screw - #8-32 x 3.25", for Chassis Straps
#8-32 x 3 ¼" chassis strap screw. Single piece.
$2.00
S-H100 Screw - 1", Flat top Phillips, Stainless Steel
Package of 4
1" stainless steel Phillips head, flat top screw.
$1.40
S-H105 Screw - 1", Phillips, Oval Head, Matching T-Nut
Package of 4
1" Oval head, Phillips screw with matching t-nut. (package of 4)
$1.40
S-HS1032-1F Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Package of 5
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
$1.50
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Package of 5
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.75
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.35
S-HS632-X Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.40
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.50
P-GB-SCREW-4 Screw - Bigsby, for Mounting Bridge Plates
Genuine Bigsby® mounting screws. These wood screws are for mounting bridge plates to the top of the guitar body. These are the stock screws included with plates like P-GB-PLATE.
$1.98
P-GB-SCREW-1X Screw - Bigsby, Regular #125, Hinge
Colors Available:
Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.
Starting at $1.95
S-H107-X Screw - Fender®, for Pickups and Switches
Package of 12
Screws for pickups and switches.
Starting at $4.25
S-H118 Screw - Fender®, Pickup Mounting, for P-Bass & J-Bass
Package of 12
4 x 1.25, package of 12.
$4.95
S-HS-5D5C-N Screw - M3, Nickel, Combination Head, Binding, 6mm
Package of 5
Combination Drive, Nickel, 6mm, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.75
S-HS-M3-6-X Screw - M3, Painted, Combination Head, Binding, 6mm
Package of 5
Colors Available:
Combination Drive, Colored Head Binding Screws, 6mm, M3, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.75
S-HS-M3-X Screw - M3, Phillips, Pan Head, Machine
Package of 5
Phillips panhead machine screw, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
See S-HS-M3-6-X for colored 6mm M3 screws.
Starting at $0.75
S-HSM4D7-20 Screw - M4 x 0.70, Phillips, Pan Head, Stainless Steel, Machine
Package of 4
(Metric Threading: M4 x 0.70) - 20 mm long
$0.80
Don't see what you're looking for? Send us your product suggestions!