Hardware

W-BNUT-X Dress Nut - Befaco, Bananuts, for 3.5mm Jacks
Colors Available:
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code: blue, purple, red, orange, yellow, white, green and black. These nuts are great for color-coding jacks or color-theming modules. Sold individually.
$0.69
W-BNUTL-BK Dress Nut - Befaco, Bananuts, for M7 Pots
Larger threaded black Bananuts for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs.
$0.69
S-HNUT-38X Finishing Nut - For ⅜” Jacks and Pots, ⅜”-32 UNEF-2A
Package of 5
Colors Available:
High quality plated ⅜” nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The ⅜”-32 UNEF-2A threading fits many ⅜” bushing parts such as Switchcraft ¼” jacks and CTS pots.
Starting at $0.59
S-H8FW Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.15
S-HS1032-1F-SET Hardware - Fender, Screws & T-Nuts for Handle
Package of 5
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$3.40
P-H52-WASHER-LOCK Lock Washer - Carling, Internal Tooth, for Toggle and Foot Switches
Package of 5
Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.
$2.69
S-HLW-CARLING Locking Washer - Carling, for switches
Package of 5
Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).
$1.75
R-VNUT-M7 Nut & Washer - for M7x0.75 Potentiometers
Replacement nut for Marshall style pots with 7mm bushing. Sold individually
$0.20
R-VNUT-38 Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
$0.70
S-H514 Nut & Washer - Panel, for Fender / Marshall Jacks
Package of 5
M12 x1.0 threading. Nut and washer set for panel-mounting jacks.
$1.50
R-VNUT-38-X Nut & Washer - Panel, for ⅜" Potentiometers and Jacks
Package of 100
Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.
$25.00
P-H264-NUT Nut - 8-32, Keps with external tooth, zinc
Package of 10
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.25
S-HCN1024 Nut - Cage, Zinc, 10-24, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-24 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.75
S-HCN1032 Nut - Cage, Zinc, 10-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.75
S-HCN832 Nut - Cage, Zinc, 8-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 8-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
$0.60
R-VC-NUT Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
Replacement nut for CTS 450 series potentiometers and others.
  • 3/8-32 threading
  • Sold individually
$0.35
R-VKG-NUT Nut - for Marshall, Hex Type, M9, for Potentiometers
Package of 5
Replacement nut for Marshall snap in style pots with M9 bushing.
$0.75
S-HHNX Nut - Hex finished, fine thread, zinc
Package of 5
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
Starting at $0.30
S-H111 Nut - Hex, for Carling switches, ~\frac{15}{32}~"
Hex nut for Carling switches, 15/32". Sold individually.
$0.35
S-HKEP-X Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10
Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Starting at $1.15
P-H52-NUT-DRESSX Nut - Large Dress Nut, Carling, 15/32-32UNS
Colors Available:
Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
Starting at $1.05
S-HHN-M3 Nut - M3-0.5 Hex Nut, Stainless Steel
Package of 5
A threaded fastener made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
$0.50
R-VM-NUT-2 Nut - M8x0.75 hex, for potentiometers / switches / jacks
Package of 5
M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
$1.25
W-SC-DRESS-X Nut - Switchcraft, Dress Nut / Sealing Nut, ⅜”-32 UNEF-2A
Switchcraft shouldered hex nuts for ⅜”-32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. The large nut (W-SC-DRESS-1) is intended for panel or chassis thicknesses of 0.05” through 0.09”. The small nut (W-SC-DRESS-2) is intended for panel or chassis thicknesses of 0.095” through 0.125”. Rubber grommet included.
Starting at $2.49
Don't see what you're looking for? Send us your product suggestions!