Hardware

S-H10FW Finishing Washer - #10, Stainless Steel, Countersunk
#10 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.
$1.35
package of 10
S-H4FW-X Finishing Washer - #4, Countersunk
#4 finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance.
Starting at $1.35
package of 10
S-H6FW Finishing Washer - #6, 18-8 Stainless Steel, Countersunk
#6 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.
$1.25
package of 10
S-H8FW-X Finishing Washer - Blackface / Silverface, Plated Metal
Colors Available:
Plated metal finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found in many vintage blackface and silverface amplifiers and cabinets. This style is most typically used on front grill and baffle board mounting screws in these amps and cabinets. Fits with #8 countersunk screws.
Starting at $1.25
package of 10
S-HXFW-2N Finishing Washer - Nickel-plated Brass, Countersunk, Flanged, Fender Style
Flanged finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flanged finishing washers found on later blackface and silverface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the earlier flush style finishing washers used on these amps, see S-HXFW-1N.
Starting at $5.35
package of 10
S-HXFW-1N Finishing Washer - Nickel-plated Brass, Countersunk, Flush, Fender Style
Flush finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flush finishing washers found on earlier blackface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the later flanged style finishing washers used on these amps, see S-HXFW-2N.
Starting at $2.95
package of 10
S-H514 Nut & Washer - Panel, for Fender / Marshall Jacks
M12 x1.0 threading. Nut and washer set for panel-mounting jacks.
$1.55
package of 5
S-HHN-X-SS Nut - Hex, Stainless Steel, Imperial Thread
Imperial threaded hex nuts made of 18-8 stainless steel. Hex nuts like these can be found in countless pieces of equipment such as Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.
$0.89
package of 5
S-HFS10-34 Screw - #10 x ¾”, Phillips, Flat Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws. These flat head #10 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for AC power cables used in vintage Fender® blackface and silverface combo amps. For the smaller #8 screws often used with reverb cables, see S-HFS8-34.
$1.95
package of 5
S-HPRH3-14 Screw - #3 x ¼”, Phillips, Round Head, Wood, Nickel-plated
#3 x ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Gibson® truss rod covers.
$1.79
package of 5
S-HPOH3-38 Screw - #3 x ⅜”, Phillips, Oval Head, Wood, Nickel-plated
#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.
$1.59
package of 5
S-HPRH3-38 Screw - #3 x ⅜”, Phillips, Round Head, Sheet Metal, Nickel-plated
#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on Fender® guitars.
$2.25
package of 7
S-HSRH3-38 Screw - #3 x ⅜”, Slotted, Round Head, Sheet Metal, Nickel-plated
#3 x ⅜” slotted drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$2.95
package of 7
S-HPRH4-114 Screw - #4 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
#4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.
$2.15
package of 5
S-HPOH4-12 Screw - #4 x ½”, Phillips, Oval Head, Sheet Metal, Nickel-plated
#4 x ½” Phillips drive sheet metal screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® pickguards, tremolo covers, and some bridge covers.
$1.25
package of 5
S-HSOH4-12 Screw - #4 x ½”, Slotted, Oval Head, Wood, Nickel-plated
#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.
$1.79
package of 5
S-HPRH6-114 Screw - #6 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
#6 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on vintage style Fender® Stratocaster® bridges mounted directly to the body using six screws.
$2.59
package of 6
S-HSOH6-1 Screw - #6 x 1”, Slotted, Oval Head, Wood, Nickel-plated
#6 x 1” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Fender® tweed amps to secure the back panels. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$1.75
package of 4
S-HBS6-516 Screw - #6 x 5/16”, Phillips, Pan Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws with blunt tips. These pan head #6 screws have a length of 5/16” and are commonly used to secure 9-pin sockets and other hardware to the chassis of blackface and silverface amps. These are also used in some tweed amps for securing the fiberboard and other hardware to the chassis. For the larger #8 blunt tip machine screws found in vintage Fender® amps, see S-HBS8-38.
$1.29
package of 5
S-HPOH6-X Screw - #6, Phillips, Oval Head, Wood, Nickel-plated
#6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.
Starting at $1.25
package of 4
S-HRS6-114 Screw - #6-32 x 1 ¼” Rosette Head, Machine, Bronze-plated
#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.
$1.89
package of 4
S-HSOH8-134 Screw - #8 x 1 ¾”, Slotted, Oval Head, Wood, Nickel-plated
#8 x 1 ¾” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$2.59
package of 4
S-HBS8-38 Screw - #8 x 3/8”, Phillips, Pan Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws with blunt tips. These pan head #8 screws have a length of 3/8” and are commonly used to secure the fiberboard, capacitor pan, and other hardware to the chassis of blackface and silverface amps. For the smaller #6 blunt tip machine screws found in vintage Fender® amps, see S-HBS6-516.
$1.89
package of 5
S-HFS8-34 Screw - #8 x ¾”, Phillips, Flat Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws. These flat head #8 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for RCA reverb tank cables used in vintage Fender® blackface and silverface combo amps. For the larger #10 screws often used with power cables, see S-HFS10-34.
$1.59
package of 5
Don't see what you're looking for? Send us your product suggestions!